A lot of no cost 300-365 demonstrations can be bought in various web sites so you could possibly obtain 300-365 examine publications when getting a great grip across the inquiries required while in the 300-365 test. Several on the web training choices readily available so you could possibly select one that may give a fine screen. A site with a capable screen will have a good discovering surroundings. Aside from anyone screen its essential to likewise seek out possibilities including the query quality and even precisely how useful it can be with regard to getting yourself ready for the important test out!


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 300-365 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-365 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/300-365-exam-dumps.html

2021 Mar 300-365 latest exam

Q21. Which two options are limitations of using an AP as a workgroup bridge? (Choose two.) 

A. Only factory-configured MAPs can support WGB mode. 

B. MAPs that are configured in WGB mode do not answer S36 radio measurement requests. 

C. A limited subset of Layer 2 security types are supported for wireless clients of a WGB. 

D. There is a limit of 20 wired client devices. 

E. Multiple VLANs are not supported for wireless clients. 

Answer: B,D 


Q22. Scenario 

There is a problem with the East-WLC-2504A. When configuration changes are made to the Employees-East-Wing AP Group that covers the East-Wing, none of the APs receive the updates. Referto the exhibits to determine where the problems are. 

What needs to be changed in the configuration of the East-WLC-2504A controller to restore functionality to the Employees-East-Wing AP Group? (Choose four.) 

A. Change the AP in the Employees-East-Wing AP Group. 

B. Change the IP Address in the east-wing interface. 

C. Change the VLAN Identifier in the east-wing interface. 

D. Enable Dynamic AP Management in the east-wing interface. 

E. Change the Port Number to 2 in the east-wing interface. 

F. Add the Primary Controller and IP address to the 3700-East-Wing AP. 

G. Change the SSID in the Employees-East-Wing AP Group. 

H. Change the Interface/Interface Group In the Employees-East-Wing AP Group. 

Answer: D,F,G,H 


Q23. Refer to Exhibit. 

A wireless client is connecting to FlexAPI which is currently working standalone mode. The AAA authentication process is returning the following AVPs: 

Tunnel-Private-Group-ld(81): 15 Tunnel-Medium-Type(65):IEEE-802(6) Tunnel-Type(64): VLAN(13) 

Which three behaviors will the client experience? (Choose three.) 

A. While the AP is in standalone mode, the client will be placed in VLAN 15. 

B. While the AP is in standalone mode, the client will be placed in VLAN 10. 

C. When the AP transitions to connected mode, the client will be de-authenticated. 

D. While the AP is in standalone mode, the client will be placed in VLAN 13. 

E. When the AP is in connected mode, the client will be placed in VLAN 13. 

F. When the AP transitions to connected mode the client will remain associated. 

G. When the AP is in connected mode, the client will be placed in VLAN 15. 

H. When the AP is in connected mode, the client will be placed in VLAN 10. 

Answer: A,D,E 


Q24. A customer has implemented a wireless network that requires tuning for High Density applications utilizing the RX-SOP feature. They are experiencing a high noise floor (average of -65 dBm) and expect that to decrease significantly. A sampling of radios determine that most Access Points have neighbors on the same channel at a power level of -75 dBm. Which value should the customer use to start tuning RX-SOP? 

A. -60 dBm 

B. -65dBm 

C. -70 dBm 

D. -75 dBm 

E. -80 dBm 

Answer:


Q25. A network engineer is viewing the QBSS information in a packet sniff. Which two QBSS characteristics are crucial for successful troubleshooting? (Choose two.) 

A. When only WMM is enabled, information element number 1 QBSS Load information element is sent out in the beacons and probe responses. 

B. When only WMM is enabled, information element number 3 QBSS Load information element is sent out in the beacons and probe responses. 

C. When the client CAC limit is supported, information element number 2 is sent out in the beacons and probe responses on the bg radios. 

D. When the client CAC limit is supported, information element number 1 is sent out in the beacons and probe responses on the bg radios. 

E. When only WMM is enabled, information element number 2 QBSS Load information element is sent out in the beacons and probe responses. 

Answer: D,E 


Renewal 300-365 download:

Q26. A customer called into the support center with a problem ticket that involves wireless clients having to reauthenticate when they are walking around their office. After further investigation, it was discovered that the customer has two controllers in an N+1 deployment. Which action must the engineer take to troubleshoot the issue? 

A. Verify that the wireless controllers are in the same mobility group and that the access points are all on the primary controller. 

B. Under the SSID, make sure that 802.1 Iris configured and running for the clients. 

C. Make sure that the SSID has the authentication set to 802.1x with Cisco Centralized Key Management so the data clients can roam seamlessly. 

D. Verify the access points are spread out between the primary and secondary controller and that the controllers are in the same mobility group. 

Answer:


Q27. Which statement about when you configure FlexConnect APs and you want to set up Cisco Centralized Key Management fast roaming is true? 

A. FlexConnect groups are required for Cisco Centralized Key Management fast roaming to work with FlexConnect access points. 

B. APs that are in the same FlexConnect group but associated to different WLCs support Cisco Centralized Key Management. 

C. Cisco Centralized Key Management fast roaming among FlexConnect and non-FlexConnect access points is supported. 

D. The FlexConnect access point must be in standalone mode to support Cisco Centralized Key Management. 

Answer:


Q28. A wireless engineer wants to enable optimized roaming for their 5GHz wireless network with these settings: -72dBm RSSI value, 25% coverage exception level percentage, and a minimum of 50 packets received. 

Which two commands achieve these settings? (Choose two.) 

A. config advanced 802.11a coverage data fail-percentage 25 

B. config advanced 802.11b optimized-roaming enable 

C. config advanced 802.11b coverage data rssi-threshold -72 

D. config advanced 802.11a optimized-roaming enable 

E. config advanced 802.11a coverage data rssi-threshold -72 

Answer: A,D 


Q29. Controllers WLC_1 and WLC_2 are in the same mobility group. A wireless client that does not have the same VLAN interface roams from WLC_1 to WLC_2. What happens to the client roaming? 

A. The client context is deleted in controller WLC_1, and a new client context is created in WLC_2 to become the anchor controller 

B. The client context is moved from controller WLC_1 to controller WLC_2. The result is that the WLC_1 client context is deleted and WLC_2 becomes the anchor controller. 

C. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the foreign controller and WLC_2 becomes the anchor controller. 

D. The client context is copied from controller WLC_1 to controller WLC_2. The result is that WLC_1 becomes the anchor controller and WLC_2 becomes the foreign controller. 

Answer:


Q30. A customer has implemented a N+1 high availability plan in a multistory building. All APs on odd numbered floors are set as primary to WLC-A and all APs on even numbered floors are set as primary to WLC-8. Which two problems are likely to arise from this design? (Choose two) 

A. inconsistent CleanAir data due to multiple WLCs 

B. floor-to-floor bleed-through that causes intercontroller roaming delays 

C. AVC inconsistency due to multiple mobility group members 

D. legacy device compatibility with multiple WLC configuration that causes disconnects 

E. unpredictable AP loading during a WLC failure 

Answer: A,C