Your success in 70 345 vce is our sole target and we develop all our 70 345 dumps in a way that facilitates the attainment of this target. Not only is our 70 345 exam dumps material the best you can find, it is also the most detailed and the most updated. 70 345 dumps for Microsoft 70-345 are written to the highest standards of technical accuracy.
Online Microsoft 70-345 free dumps demo Below:
NEW QUESTION 1
You have an Exchange Server 2021 organization. The organization contains servers that have either Exchange Server 2010 or Exchange Server 2021 installed.
You are migrating several thousands of mailboxes from an Exchange Server 2010 server named EX01 to an Exchange Server 2021 server named EX02. EX01 contains a single mailbox database.
You discover that only 20 mailboxes move concurrently.
You need to increase the number of mailboxes that move concurrently What should you do?
- A. Run the Set-MoveRequest cmdlel
- B. Edit the MsExchangeMailboxReplicatioan.exe.config file
- C. Edit the MSExchangeMigrationWorkflow.exe.config file.
- D. Run the Set-MigrationBatch cmdlet
Answer: B
NEW QUESTION 2
You have a server named EX01 that runs Exchange Server 2021. The disks on EX01 are configured as shown in the following table.
All users access their email by using Microsoft Outlook 2013.
From Performance Monitor, you discover that the MSExchange DatabaseI/O Database Reads Average Latency counter displays values that are higher than normal.
You need to identify the impact of the high counter values on user connections in the Exchange Server organization.
What are two client connections that will report slower performance when opening email messages? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Outlook in Online Mode
- B. Outlook in Cached Exchange Mode
- C. Outlook on the web
- D. IMAP4 clients
- E. mobile devices using Exchange Active Sync
Answer: AC
NEW QUESTION 3
You have an Exchange Server 2021 organization.
You need to ensure that users in each department download an Offline Address Book (OAB) that only contains the users in their department. The solution must ensure that all of the users can continue to see all the other users in the organization.
Which three actions should you perform? Each correct answer presents part of the solution.
- A. Create an OAB for each department
- B. Modify the properties for each user mailbox.
- C. Create an address book policy (ABP) for each department.
- D. Create an address list for each department.
- E. Modify the properties of the default OAB.
- F. Create an email address policy for each department.
Answer: ABC
NEW QUESTION 4
You plan to configure the Exchange organization for site failovers.
You need to recommend how many certificates must be deployed to meet the availability requirements and the security requirements.
What is the minimum number of certificates you should recommend deploying?
- A. One
- B. Two
- C. Three
- D. Four
Answer: C
Explanation: Some services, such as Outlook Anywhere and Exchange ActiveSync, require certificates to be configured on your Exchange 2021 server.
From scenario: Security Requirements
Contoso identifies the following security requirements for the planned deployment:
Users must be able to access their mailbox by using Exchange ActiveSync on the company-approved tablets only.
Email messages sent from the users in the human resources department of Contoso must be protected by using AD RMS, regardless of the mail client.
Email messages sent to the users in the fabrikam.com SMTP domain must be encrypted automatically. And others
Exchange Server mailbox databases must be encrypted while at rest.
Users must be prevented from using Outlook on the web while they are offline.
Contoso users must be able to share Calendar details with approved external domains only. Whenever possible, client computers must be directed to the same Exchange server for log collection. References: https://technet.microsoft.com/en-us/library/mt441782(v=exchg.150).aspx
NEW QUESTION 5
You have an Exchange Server 2021 organization. Users store sales information in public folders.
You need to create a public folder that can receive email from external users.
Which three commands should you use? Each correct answer presents part of the solution.
- A. Add-MailboxPermission
- B. Add-PublicFolderClientPermission
- C. Update-PublicFolderMailbox
- D. Enable-MailPublicFolder
- E. Add-RecipientPermission
- F. New-PublicFolder
- G. New-Mailbox
Answer: BDF
NEW QUESTION 6
Your company has an Exchange Server 2021 organization. The organization has a four-node database availability group (DAG) that spans two data centers. Each data center is configured as a separate Active Directory site. The data centers connect to each other by using a high-speed WAN link. Each data center connects directly to the Internet and has a scoped Send connector configured.
The company’s public DNS zone contains one MX record.
You need to ensure that if an Internet link becomes unavailable in one data center, email messages destined to external recipients can be routed through the other data center.
What should you do?
- A. Create a Receive connector in each data center.
- B. Clear the Proxy through Client Access server check box.
- C. Clear the Scoped Send Connector check box.
- D. Create an MX record in the internal DNS zone.
Answer: C
NEW QUESTION 7
You need to configure the Sender Policy Framework (SPF) for a domain named contoso.com to ensure that only the following senders are authorized to send email for contoso.com:
Hosts listed in the contoso.com MX records IP addresses inthe 131.107.1.0/24 subnet.
How should you configure the DNS record for the SPF? To answer, drag the appropriate values to the correct targets
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation: 
NEW QUESTION 8
You have an Exchange Server 2021 organization.
All users work from a main office and use Microsoft Outlook 2021.
You recently ran the Microsoft Office 365 Hybrid Configuration Wizard and moved most of the user mailboxes to Exchange Online.
A network administrator reports an increase in the amount of outbound SMTP traffic from the network. You need to reduce the amount of bandwidth utilization for the outbound SMTP traffic.
What should you do?
- A. From the Exchange Server organization, create a Receive connector that uses the IP address of Exchange Online as a remote range.
- B. From the public DNS zone, modify the MX record to point to Exchange Online.
- C. From the public DNS zone, modify the SRV record to point to Exchange Online.
- D. From the Exchange Server organization, create a Send connector that uses Exchange Online as an SMTP smart host.
Answer: B
NEW QUESTION 9
You need to recommend a solution that meets the security requirements for the mailbox databases. What should you include in the recommendation?
- A. Resilient File System (ReFS)
- B. Transparent Data Encryption (TDE)
- C. BitLocker Drive Encryption (BitLocker)
- D. Encrypting Files System (EFS)
Answer: C
Explanation: Topic 4, Litware
Case study Exchange Server
Litware has an Exchange Server 2021 organization that uses the namespaces of mail.litware.com and autodiscover.litware.com.
The organization contains the servers configured as shown in the following table.
All Internet email is routed through HOU-EX1. Requirements
Business Goals
Litware has security concerns about the data and messaging content of the research and development department. Preventing information leaks is a priority.
All users must be able to access their corporate email from any device.
Litware plans to minimize the costs associated with changing the Exchange Server environment. Planned Changes
Litware plans to implement a site resilience solution ensuring that outbound email messages can be delivered if one of the sites fail. The site resilience solution must allow all users to access their mailbox if a server fails in each site.
Availability Requirements
Litware identifies the following availability requirements: Load balancing must support the following functionalities:
Load balancing must support the following functionalities:
Provide SSL termination
Remove failed Mailbox servers from the server pool.
Data collected by Managed Availability from Outlook on the web must be used.
Target server health must be configured as per-protocol so that only the affected client protocol is directed to another server if a server fails.
The site resilience solution must follow the bound namespace model.
Security Requirements
Litware identifies the following security requirements:
Users in the research and development department must be able to encrypt documents sent to external users. The encrypted email messages must never be forwarded by the external recipients.
Only specific research and development department users must be able to access confidential internal email regarding the high-security government contracts.
All certificates deployed to the Exchange organization must be issued by a trusted third-party certification authority (CA).
The principle of least privilege must be applied to all users and permissions. Compliance Requirements
Litware identifies the following compliance requirements:
Any new mailbox created for the auditing department must have a retention policy named Audit immediately applied manually after the mailbox is created.
Each week, a team of regulation auditors must review the email messages sent and received by all the research and development department users.
The regulation auditors must be able to review the email messages of mailboxes placed on Litigation Hold.
The regulation auditors must be able to gain quick access to the email messages.
NEW QUESTION 10
You are deploying a new Exchange Server 2021 organization.
You deploy two servers named ex01.contoso.com and ex02.contoso.com to the organization.
You need to configure DNS to ensure that servers on the internet can send email messages to the organization by using an SMTP domain named contoso.com. The solution must ensure that ex02.contoso.com is used only if ex01.contoso.com becomes unavailable.
You create an MX record for contoso.com that points to ex01.contoso.com. The record has a preference value of 10
What command should you run? To answer, select the appropriate options in the answer area
Answer:
Explanation: 
NEW QUESTION 11
You have an Exchange Server 2021 organization. You need to assign the following permissions:
A user named User1 must be able to monitor the Exchange services and components.
A user named User2 must be able to install provisioned Exchange servers.
The solution must use the principle of least privilege.
Which role should you assign to each user? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation: 
NEW QUESTION 12
You need to recommend changes to the messaging infrastructure. The changes must meet the connectivity requirements after the planned upgrade. Which two actions should you recommend? Each correct answer presents part of the solution.
- A. From the Mailbox servers, import the Edge Subscription file.
- B. On the Edge Transport Servers, start Edge Synchronization.
- C. On the Edge Transport servers, import the Edge Subscription file.
- D. On the Edge Transport servers, create an Edge Subscription file.
- E. On the Mailbox servers, restart the Microsoft Exchange Transport service.
Answer: AE
NEW QUESTION 13
You have an Exchange Server 2021 organization. All users use Microsoft Outlook 2021.
You need to configure the Exchange Server organization to meet following requirements:
• Users must be prevented from receiving a notification when they attempt to send an email message to distribution groups that contain less than 100 members.
• Users must be notified before they send email messages to an unmonitored mailbox named Service1.
Which cmdlet should you run to meet each requirement? To answer, drag appropriate cmdlets to the correct requirements. Each cmdlet must be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation: 
NEW QUESTION 14
You have an Exchange Server 2021 organization.
Users report that they receive an Autodiscover error when they attempt to configure a Microsoft Outlook profile. You need to view the URLs that are returned to the users when they attempt to establish an Autodiscover connection. Which command should you run from an Exchange server?
- A. Test-OutlookConnectivity
- B. Test-OutlookWebServices
- C. Test-WebServicesConnectivity
- D. Test-MAPIConnectivity
Answer: B
Explanation: Use the Test-OutlookWebServices cmdlet to verify the Autodiscover service settings for Microsoft Outlook on a computer running Microsoft Exchange Server
that has the Client Access server role installed.
NEW QUESTION 15
You need to recommend an NLB configuration that meets the availability requirements and the security requirements. Which load balancing solution should you recommend?
- A. Layer 7 load balancing with session affinity
- B. Layer 4 load balancing without session affinity
- C. Layer 4 load balancing with session affinity
- D. Layer 7 load balancing without session affinity
Answer: A
NEW QUESTION 16
You need to recommend a solution that meets the security requirements for the human resources users. What should you include in the recommendation?
- A. an Outlook protection rule
- B. an Inbox rule
- C. a transport rule
- D. a TLS sender-domain filter list
Answer: A
P.S. Surepassexam now are offering 100% pass ensure 70-345 dumps! All 70-345 exam questions have been updated with correct answers: https://www.surepassexam.com/70-345-exam-dumps.html (162 New Questions)