Our pass rate is high to 98.9% and the similarity percentage between our 300 075 vce study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300 075 vce exam in just one try? I am currently studying for the Cisco 300 075 dump exam. Latest Cisco 300 075 pdf Test exam practice questions and answers, Try Cisco cisco 300 075 Brain Dumps First.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 300-075 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/300-075-exam-dumps.html
P.S. Accurate 300-075 guidance are available on Google Drive, GET MORE: https://drive.google.com/open?id=1bVtYHQM9JRfrQGNFo3XwqAc50bhY6eCv
New Cisco 300-075 Exam Dumps Collection (Question 8 - Question 17)
Question No: 8
Which two options are requirements for hardware MTP on Cisco IOS routers? (Choose two.)
A. the same audio codec on both legs of the call
B. an FXO card
C. a binding IP address
D. a hardware transcoder
E. DSP resources
F. a T1 card
Answer: D,E
Question No: 9
Which system configuration is used to set a restriction on audio bandwidth?
A. region
B. location
C. physical location
D. licensing
Answer: B
Question No: 10
Which three options are Cisco VCS zone types? (Choose three.)
A. H323
B. DNS
C. traversal client
D. gatekeeper
E. neighbor
F. SIP
Answer: B,C,E
Question No: 11
An engineer is configuring a new DX-80 in Cisco Unified Communications Manager. Where can an engineer verify the default DSCP value of AF41?
A. enterprise phone configuration
B. common phone profile
C. service parameters
D. enterprise parameters
Answer: C
Question No: 12
Scenario:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.
The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:
Locations:
CSS:
SRST:
SRST-BR2-Config:
BR2 Config:
SRSTPSTNCall:
After configuring the CFUR for the directory number that is applied to BR2 phone (+442288224001), the calls fail from the PSTN. Which two of the following configurations if applied to the router, would remedy this situation? (Choose two.)
A. dial-peer voice 1 pots
incoming called-number 228822u2026 direct-inward-dial
port 0/0/0:15
B. dial-peer voice 1 pots
incoming called-number 228822u2026 direct-inward-dial
port 0/0/0:13
C. voice translation-rule 1 rule 1/228821....S//+44&/ exit
!
voice translation-profile pstn-in translate called 1
!
voice-port 0/0/0:15
translation-profile incoming pstn-in
D. voice translation-rule 1 rule 1/228822....S//+44&/ exit
!
voice translation-profile pstn-in translate called 1
!
voice-port 0/0/0:15
translation-profile incoming pstn-in
E. The router does not need to be configured.
Answer: A,D
Question No: 13
Which two configurable options are available to enable Early Offer for calls over a Cisco Unified Communications Manager SIP trunk? (Choose two.)
A. Early Offer support for voice and video calls Mandatory (insert MTP if needed)
B. Media Termination Point Required
C. Use Trusted Relay Point
D. Accept Audio Codec Preferences in Received Offer
E. No Media Termination Point Required
Answer: A,B
Question No: 14
Which statement is true when considering a Cisco VoIP environment for regional configuration?
A. G.711 requires 128K of bandwidth per call.
B. G.729 requires 24K of bandwidth per call.
C. The default codec does not matter if you have defined a hardware MTP in your Cisco Unified Communications Manager environment.
D. To deploy a Cisco H.323 gatekeeper, you must configure MTP resources on the gatekeeper and only use G.711 between regions.
Answer: C
Question No: 15
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone.
The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
SX20 System information:
DX650 Configuration:
MRGL:
DP:
Locations:
AARG:
CSS:
Movi Failure:
Movie Settings:
What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two)
A. Incorrect username and password.
B. Wrong SIP domain configured.
C. User is not associated with the device.
D. IP or DNS name resolution issue.
E. CSF Device is not registered.
F. IP Phone DN not associated with the user.
Answer: B,D
Question No: 16
To which subzone can you apply bandwidth limitations?
A. default, traversal, and all manually configured subzones
B. manually configured subzones
C. cluster
D. default
Answer: A
Question No: 17
Scenario:
There are two call control systems in this item.
The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone.
The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
DP:
Locations:
CSS:
Movie Failure:
Movie Settings:
CIPTV2 Topology:
Subzone:
Links:
Pipe:
A third collaboration call fails between the backbone site and the HQ site. After reviewing the exhibits, which of the following reasons could be causing this failure?
A. Not enough bandwidth has been allocated.
B. Device Pool.
C. Location.
D. The pipe is not functioning.
Answer: A
Recommend!! Get the Accurate 300-075 dumps in VCE and PDF From Thedumpscentre, Welcome to download: http://www.thedumpscentre.com/300-075-dumps/ (New 245 Q&As Version)