Our pass rate is high to 98.9% and the similarity percentage between our 300 075 dump study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300 075 ciptv2 exam in just one try? I am currently studying for the Cisco 300 075 ciptv2 exam. Latest Cisco 300 075 pdf Test exam practice questions and answers, Try Cisco cisco 300 075 Brain Dumps First.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 300-075 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/300-075-exam-dumps.html

P.S. 100% Guarantee 300-075 testing engine are available on Google Drive, GET MORE: https://drive.google.com/open?id=1OTter-OjT8vzYmol0xCEAcv3FNmkyaGf


New Cisco 300-075 Exam Dumps Collection (Question 7 - Question 16)

Question No: 7

Which codec is recommended by Cisco for multisite music on hold deployment that spans through the WAN links?

A. G.711

B. G.723

C. G.729

D. G.722

E. G.728

F. G.725

Answer: C



Question No: 8

Refer to the exhibit.

Multicast MOH needs to be run from flash at the remote site. Which Cisco IOS configuration at the SRST router is correct?

A.

!

call-manager-fallback

ip source-address 10.1.5.102 port 2000

max-ephones 2

max-dn 8 dual-line moh music-on-hold au

multicast moh 239.1.1.1 port 16384

B.

!

call-manager-fallback

ip source-address 10.1.5.102 port 2000

max-ephones 2

max-dn 8 dual-line moh music-on-hold au

multicast moh 239.1.1.1 port 163t

C.

call-manager-fallback

ip source-address 10.1.120.1 port 2000 max-ephones 2

max-dn 8

moh music-on-hold.au

multicast moh 239.1.1.1 port 32767

D.

!

call-manager-fallback

ip source-address 10.1.5.102 port 2000

max-ephones 2

max-dn 8 dual-line moh music-on-hold an

multicast moh 239.1.1.1 port 32767

Answer: A

Explanation: Incorrect: BCD

following configuration will required to Enable Multicast MOH on the Cisco SRST Gateway 1.

ccm-manager music-on-hold 2.

interface loopback number

3.

ip address ip-address mask

4.

exit 5.

interface fastethernet slot/port

6.

exit 8.

call-manager-fallback 9.

ip source-address ip-address [port port] 10.

max-ephones max-phones

11.

max-dn max-directory-number

12.

moh filename

13.

multicast moh multicast-address port port [route ip-address-list]

14.

exit



Question No: 9

An engineer has configured a Cisco EX60 to register with a Cisco VCS-C, but the device is not showing up as registered. During troubleshooting, which component will the engineer

likely find missing in the configuration?

A. gatekeeper

B. MCU

C. default gateway

D. TMS

E. DNS

Answer: A

Topic 4, Exam Pool D

208.Refer to the exhibit.

Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship?

A. the label name specified in the router eigrp command

B. the autonomous-system number specified in the service-family ipv4 autonomous-system command

C. the sf-interface configuration

D. the topology base configurations

E. the label name specified in the router eigrp command and the autonomous-system number

Answer: B

Explanation: Incorrect: ACDE

service-family ipv4 autonomous-system 1 enables a Cisco SAF service family for the specified autonomous system on the router Link:

http://www.cisco.com/en/US/docs/ios/saf/configuration/guide/saf_cg_ps10591_TSD_Products_Configuration_Guide_Chapter.html#wp1056363



Question No: 10

Which minimum configuration is needed for the SAF Internal Client to register with this SAF Forwarder?

A. router eigrp SAF

!

service-family ipv4 autonomous-system 1

!

topology base exit-sf-topology exit-service-family

!

voice service saf profile trunk-route 1

session protocol sip interface Loopbackl transport tcp port 5060 i

B. router eigrp SAF

!

service-family ipv4 autonomous-system 1

!

topology base exit-sf-topology exit-service-family

!

voice service saf profile trunk-route 1

session protocol sip interface Loopbackl transport tcp port 5060

!

profile dn-block 1 alias-prefix 1972555 pattern 1 type extension 4xxx

!

profile callcontrol 1 dn-service

trunk-route 1

dn-block 1

dn-block 2 i

C. router eigrp SAF

!

service-family ipv4 autonomous-system 1

!

topology base exit-sf-topology exit-service-family

!

voice service saf profile trunk-route 1

session protocol sip interface Loopbackl transport tcp port 5060

!

profile dn-block 1 alias-prefix 1972555 pattern 1 type extension 4xxx

!

profile callcontrol 1 dn-service

trunk-route 1

dn-block 1

dn-block 2

!

channel 1 vrouter SAF asystem 1 subscribe callcontrol wildcarded publish callcontrol 1

i

D. router eigrp SAF

!

service-family ipv4 autonomous-system 1

!

topology base exit-sf-topology exit-service-family

!

voice service saf

!

channel 1 vrouter SAF asystem 1

E. router eigrp SAF

!

service-family ipv4 autonomous-system 1

!

topology base exit-sf-topology exit-service-family i

Answer: A



Question No: 11

Refer to the exhibit.

IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001. Which two configuration changes can correct this issue? (Choose two.)

A. Add port 1/0:23 to dial-peer voice 123 pots.

B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4.

C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the

voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All).

D. Add the command h323-gateway voip id on interface vlan120.

E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4.

Answer: B,E

Explanation: Incorrect: ACD

Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called.

Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06trunk.html



Question No: 12

Refer to the exhibit.

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. What should the TEHO-US route list configuration consist of?

A. First route group should point only to the U.K. gateway. The second route group should point to the U.S. gateway.

B. First route group should be only the local route group. The second route group should point to the U.S. gateway.

C. First route group should point only to the U.S. gateway. The second route group should be the local route group.

D. The TEHO-US route list should contain only the local route group. The globalized configuration means that the appropriate gateway will be selected automatically.

E. The \+! route pattern should point directly to the U.S. gateway.

Answer: C

Explanation: Incorrect: ABD

The route group points to one or more gateways and can choose the gateways for call

routing based on preference. The route group can serve as a trunk group by directing all calls to the primary device and then using the secondary devices when the primary is unavailable. One or more route lists can point to the same route group.

Link: http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08gw.html#wp1167274



Question No: 13

Which technologies provide remote-site redundancy for Cisco IP Phones during a WAN failure?

A. SRST and MGCP fallback

B. SRST and TEHO

C. TEHO and MGCP fallback

D. SRST and AAR

Answer: A



Question No: 14

Refer to the exhibit.

Which configuration change is needed to enable NANP international dialing during MGCP fallback?

A. Change the dial peer to dial-peer voice 901 voip.

B. Change the dial peer to dial-peer voice 9011 pots.

C. Add the command prefix 011 to the dial peer.

D. Add the command prefix 9011 to the dial peer.

Answer: C



Question No: 15

Which E.164 transformation pattern represents phone numbers in Germany?

A. \+49.!

B. 49.!

C. \49.!

D. \+49.X

Answer: A



Question No: 16

Refer to the exhibit.

Which trunks would be most suitable for Connection Y?

A. an H.225 trunk (gatekeeper-controlled)

B. intercluster trunk (gatekeeper-controlled)

C. a SIP trunk on the U.S. cluster and an intercluster trunk on the remote cluster

D. intercluster trunk (nongatekeeper-controlled)

E. No extra connections are required. As long as IP connectivity exists, you need only configure a route pattern for each site. The Cisco Unified Communications Manager will automatically forward the calls over the WAN if the destination directory number is not registered locally.

Answer: D



100% Most recent Cisco 300-075 Questions & Answers shared by 2passeasy, Get HERE: https://www.2passeasy.com/dumps/300-075/ (New 420 Q&As)