Want to know Actualtests 300-075 Exam practice test features? Want to lear more about Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certification experience? Study Validated Cisco 300-075 answers to Improve 300-075 questions at Actualtests. Gat a success with an absolute guarantee to pass Cisco 300-075 (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)) test on your first attempt.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 300-075 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/300-075-exam-dumps.html

2021 Apr 300-075 test engine

Q21. Refer to the exhibit. 

All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge as a first choice, which configuration should be implemented? 

A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Ensure that the instance ID for the hardware conference bridge is 0. 

B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. The hardware conference bridge must be configured first. 

C. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first. 

D. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Configure an additional HQ_MRGL_2. Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2. The HQ_MRGL should be assigned to the HQ phones. The HQ_MRGL_2 should be assigned to the HQ device pool. 

Answer:

Explanation: 

Expiation: 

To ensure that the hardware bridge is utilized first with all its resources BEFORE the software bridge is used … you need to have two separate MRG’s and list the hardware MRG 1st in the MRGL … 


Q22. Refer to the exhibit. 

The H.323 Gateway is showing status “unknown”. Which statement is true? 

A. The gateway must be reset in Cisco Unified Communications Manager. 

B. The no gateway command followed by the gateway command must be issued in Cisco IOS. 

C. The mgcp commands must be removed. 

D. H.323 gateways do not register with Cisco Unified Communications Manager H.323 gateways always show status "Unknown". 

E. VUAN 1 20 may be down and so the H.323 gateway appears offline to the Cisco Unified Communications Manager 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E 

After a gateway is registered with Cisco Unified Communications Manager, gateway registration status may display in Cisco Unified Communications Manager Administration as unknown. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06gtway. html 


Q23. When Cisco Extension Mobility is implemented, which CSS is used for calling privileges? 

A. The user device profile line CSS combined with the device CSS of the physical phone used to log in the extension mobility user. 

B. The user device profile device CSS combined with the line CSS of the physical phone used to log in the extension mobility user. 

C. Only the user device profile device CSS is used. 

D. The combined line/device CSS of the physical phone is used to log in the extension mobility user. 

E. The combined line/device CSS of the user device profile. 

Answer:


Q24. You are deploying a Cisco Unified Communications Manager solution with MGCP gateways at multiple locations. Which firewall and ACL configuration must you perform to allow the MCGP gateways to function correctly? 

A. Allow access to TCP port 2428. 

B. Block TCP port 1720. 

C. Open access to all TCP and UDP ports. 

D. Allow access to TCP port 1720. 

E. Block access to TCP ports 2427 and 2428. 

Answer:


Q25. You have been asked to deploy Cisco Extension Mobility Cross Cluster for a distributed call processing environment. During the initial extension mobility login request, how does the visiting cluster determine if the user is a local user or a remote user? 

A. by using a third-party automatic provisioning tool to verify user ID 

B. by broadcasting a request to all clusters to verify the user type 

C. from user IDs that are created by default when the user logs in 

D. by using Extension Mobility Cross Cluster Session Initiation Protocol (SIP) trunks 

E. by verifying against the local database 

F. by verifying the visiting Trivial File Transfer Protocol 

Answer:


Updated 300-075 latest exam:

Q26. Video calls using 384 kbps need to be supported across a gatekeeper-controlled trunk. What value should be entered into the gatekeeper to support this bandwidth? 

A. 768 kbps 

B. 384 kbps 

C. 512 kbps 

D. 192 kbps 

Answer:

Explanation: 

Incorrect Answer: A, C, D A 384-kb/s video call may comprise G.711 at 64 kb/s (for audio) plus 320 kb/s (for video). This sum does not include overhead. If the audio codec for a video call is G.729 (at 24 kb/s), the video rate increases to maintain a total bandwidth of 384 kb/s. Link: 

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08video.html#wp1059726 


Q27. While configuring Call Survivability in Cisco Unified Communications Manager, what step is mandatory to reach remote sites while in SRST mode? 

A. Enable Cisco Remote Site Reachability. 

B. Configure CFUR. 

C. Enable the SRST checkbox in the MGCP gateway. 

D. Configure the H.323 gateway for SRST in Cisco Unified Communications Manager. 

E. Enable the Failover Service parameter. 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E Call Forward Unregistered (CFUR) functionality provides the automated rerouting of calls through the PSTN when an endpoint is considered unregistered due to a remote WAN link failure Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/models.html 


Q28. Refer to the exhibit. 

Assume a centralized Cisco Unified Communications deployment with the headquarters in the U.K, and remote site in RTP. All route patterns are assigned a route list that points to the local route group. Local route groups have been configured on the U.K and RTP device pools. A U.K. user logs onto an RTP phone using the Cisco Extension Mobility feature and places an emergency call to 0000. Which statement about the emergency call is true? 

A. The call will match the U.K_Emergency route pattern partition and will egress at the RTP gateway. 

B. The call will match the U.K_Emergency route pattern partition and will egress at the U.K. gateway. 

C. The call will match the RTP_Emergency route pattern partition and will egress at the U.K. gateway. 

D. The call will match the RTP_Emergency route pattern partition and will egress at the RTP gateway. 

E. The call will fail. 

Answer:


Q29. In a Cisco Unified Communications Manager centralized call processing model, what is the best CAC method recommended for this type of deployment? 

A. QoS-based 

B. location-based 

C. RSVP-based 

D. region-based 

E. gateway-based 

F. gatekeeper-based 

Answer:


Q30. When configuring a video ISDN gateway, which two actions are requirements for the Cisco Preferred Architecture for Enterprise Collaboration? (Choose two.) 

A. Use SIP instead of H.323. 

B. Perform dial string manipulation on Cisco Unified Communications Manager. 

C. Use an * (asterisk) at the end of each ISDN number, as a suffix. 

D. Use an ! (exclamation point) at the end of each ISDN number, as a suffix. 

E. Use H.323 instead of SIP. 

Answer: A,B