It is more faster and easier to pass the Cisco 300 075 dump exam by using Breathing Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) questuins and answers. Immediate access to the Rebirth 300 075 pdf Exam and find the same core area 300 075 ciptv2 questions with professionally verified answers, then PASS your exam with a high score now.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 300-075 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-075 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/300-075-exam-dumps.html

Q1. Refer to the exhibit. 

Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1. 

How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups? 

A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number. 

B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice. 

C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway. 

D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number. 

Answer:

Explanation: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03rtgrp.html #wpxref46617 


Q2. Refer to the exhibit. 

Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship? 

A. the label name specified in the router eigrp command 

B. the autonomous-system number specified in the service-family ipv4 autonomous-system command 

C. the sf-interface configuration 

D. the topology base configurations 

E. the label name specified in the router eigrp command and the autonomous-system number 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E service-family ipv4 autonomous-system 1 enables a Cisco SAF service family for the specified autonomous system on the router Link: 

http://www.cisco.com/en/US/docs/ios/saf/configuration/guide/saf_cg_ps10591_TSD_Products_Configuration_Guide_Chapter.html#wp1056363 


Q3. In what Cisco solution is Simple Network-Enabled Auto Provision technology used? 

A. Cisco Unified Gateway Duplication 

B. Cisco Unified CallManager Redundancy 

C. Cisco Unified SRST 

D. Cisco Unified Call Survivability 

Answer:

Explanation: 

Incorrect Answer: A, B, D When the system automatically detects a failure, Cisco Unified SRST uses Simple Network Auto Provisioning (SNAP) technology to auto-configure a branch office router to provide call processing for the Cisco Unified IP phones that are registered with the router Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesr st.html 


Q4. Which component of Cisco Unified Communications Manager is responsible for sending keepalive messages to the Service Advertisement Framework forwarder? 

A. Call Control Discovery requesting service 

B. Hosted DNs service 

C. Service Advertisement Framework client control 

D. Cisco Unified Communications Manager database 

E. Service Advertisement Framework-enabled trunk 

F. gatekeeper 

Answer:


Q5. The corporate WAN has been extended to two newly acquired sites and it includes gatekeeper support. Each site has a Cisco CallManager and an H.323 gateway that allows connection to the PSTN. Which connection method is best for these two new customers? 

A. H.225 trunk (gatekeeper-controlled) 

B. intercluster trunk (non-gatekeeper controlled) 

C. SIP trunk 

D. intercluster trunk (gatekeeper-controlled) 

Answer:


Q6. Refer to the exhibit. 

What should the destination IP address be configured as on the HQ and BR1 SIP trunks? 

A. The HQ SIP trunk destination IP address should be 10.1.6.10. The BR1 SIP trunk destination IP address should be 10.1.5.10. 

B. The destination IP address is not configurable. Each cluster will learn about the remote trunk IP address through SAF learned routes. 

C. The destination IP address will be learned automatically and configured on the SIP trunks after the Cisco Unified Communications Managers discover themselves. 

D. The HQ SIP trunk destination IP address should be the HQ SAF Forwarder IP address. The BR1 SIP trunk destination IP address should be the BR1 SAF Forwarder IP address. 

Answer:

Explanation: 

Incorrect Answer: A, C, D 

The gatekeeper changes the IP address of this remote device dynamically to reflect the IP address of the remote device. 

Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08trnk.html 


Q7. Which Cisco IOS command is used to verify that the Cisco Unified Communications Manager Express has registered with the SAF Forwarder? 

A. show eigrp service-family ipv4 clients 

B. show eigrp address-family ipv4 clients 

C. show voice saf dndb all 

D. show saf registration 

E. show ip saf registration 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E show eigrp service-family ipv4 clients Displays information from the EIGRP IPv4 service-family results. 


Q8. Which three commands are mandatory to implement SRST for five Cisco IP Phones? (Choose three.) 

A. call-manager-fallback 

B. max-ephones 

C. keepalive 

D. limit-dn 

E. ip source-address 

Answer: A,B,E 


Q9. Refer to the exhibit. A user in RTP calls a phone in San Jose during congestion with Call Forward No Bandwidth (CFNB) configured to reach cell phone 4085550150. The user in RTP sees the message "Not Enough Bandwidth" on their phone and hears a fast busy tone. Which two conditions can correct this issue? (Choose two.) 

A. The calling phone (RTP) needs to have AAR Group value of AAR under the AAR Settings. 

B. The called phone (San Jose) needs to have AAR Group value of AAR under the AAR Settings. 

C. The calling phone (RTP) needs to have the AAR destination mask of 914085550150 configured under the AAR Settings. 

D. The calling phone (RTP) needs to have the AAR destination mask of 4085550150 configured under the AAR Settings. 

E. The called phone (San Jose) needs to have the AAR destination mask of 914085550150 configured under the AAR Settings. 

F. The called phone (San Jose) needs to have the AAR destination mask of 4085550150 configured under the AAR Settings. 

Answer: B,F 

Explanation: 

Incorrect Answer: A, C, D, E Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03aar.ht ml 


Q10. What is the difference between an H.323 gateway and a SIP gateway? 

A. An H.323 gateway requires that dial peers be configured before PSTN calls can be placed and received. The SIP gateway requires no dial peers. 

B. The H.323 gateway can be added in Cisco Unified Communications Manager under gateway type as H.323 Gateway. The SIP gateway can connect to Cisco Unified Communications Manager only through a SIP trunk. 

C. A SIP gateway requires a call agent for PSTN calls to be placed and received. An H.323 gateway does not require a call agent for PSTN calls to be placed and received. 

D. An H.323 gateway can register with Cisco Unified Communications Manager. A SIP gateway will show status of "Unknown". 

E. The H.323 gateway must be configured in Cisco Unified Communications Manager using a valid IP address on the gateway. The SIP gateway must be configured in Cisco Unified Communications Manager using the domain name. 

Answer: