Cause all that matters here is passing the CompTIA security+ sy0 401 exam. Cause all that you need is a high score of sy0 401 braindump CompTIA Security+ Certification exam. The only one thing you need to do is downloading Ucertify comptia security+ sy0 401 exam study guides now. We will not let you down with our money-back guarantee.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for CompTIA SY0-401 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW SY0-401 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/SY0-401-exam-dumps.html
Q671. A software firm posts patches and updates to a publicly accessible FTP site. The software firm also posts digitally signed checksums of all patches and updates. The firm does this to address:
A. Integrity of downloaded software.
B. Availability of the FTP site.
C. Confidentiality of downloaded software.
D. Integrity of the server logs.
Answer: A
Explanation:
Digital Signatures is used to validate the integrity of the message and the sender. In this case the software firm that posted the patches and updates digitally signed the checksums of all patches and updates.
Q672. Which of the following protocols uses an asymmetric key to open a session and then establishes a symmetric key for the remainder of the session?
A. SFTP
B. HTTPS
C. TFTP
D. TLS
Answer: D
Explanation:
SSL establishes a session using asymmetric encryption and maintains the session using symmetric encryption.
Q673. A security administrator notices that a specific network administrator is making unauthorized changes to the firewall every Saturday morning. Which of the following would be used to mitigate this issue so that only security administrators can make changes to the firewall?
A. Mandatory vacations
B. Job rotation
C. Least privilege
D. Time of day restrictions
Answer: C
Explanation:
A least privilege policy is to give users only the permissions that they need to do their work and no more. That is only allowing security administrators to be able to make changes to the firewall by practicing the least privilege principle.
Q674. Which of the following is used to verify data integrity?
A. SHA
B. 3DES
C. AES
D. RSA
Answer: A
Explanation:
SHA stands for "secure hash algorithm". SHA-1 is the most widely used of the existing SHA hash
functions, and is employed in several widely used applications and protocols including TLS and
SSL, PGP, SSH, S/MIME, and IPsec. It is used to ensure data integrity.
Note:
A hash value (or simply hash), also called a message digest, is a number generated from a string
of text. The hash is substantially smaller than the text itself, and is generated by a formula in such
a way that it is extremely unlikely that some other text will produce the same hash value.
Hashes play a role in security systems where they're used to ensure that transmitted messages
have not been tampered with. The sender generates a hash of the message, encrypts it, and sends it with the message itself. The recipient then decrypts both the message and the hash, produces another hash from the received message, and compares the two hashes. If they're the same, there is a very high probability that the message was transmitted intact. This is how hashing is used to ensure data integrity.
Q675. Which of the following types of application attacks would be used to specifically gain unauthorized information from databases that did not have any input validation implemented?
A. SQL injection
B. Session hijacking and XML injection
C. Cookies and attachments
D. Buffer overflow and XSS
Answer: A
Explanation:
To access information in databases, you use SQL. To gain unauthorized information from databases, a SQL Injection attack is used.
SQL injection is a code injection technique, used to attack data-driven applications, in which malicious SQL statements are inserted into an entry field for execution (e.g. to dump the database contents to the attacker). SQL injection must exploit a security vulnerability in an application's software, for example, when user input is either incorrectly filtered for string literal escape characters embedded in SQL statements or user input is not strongly typed and unexpectedly executed. SQL injection is mostly known as an attack vector for websites but can be used to attack any type of SQL database.
Q676. Fuzzing is a security assessment technique that allows testers to analyze the behavior of software applications under which of the following conditions?
A. Unexpected input
B. Invalid output
C. Parameterized input
D. Valid output
Answer: A
Explanation:
Fuzzing is a software testing technique that involves providing invalid, unexpected, or random data to as inputs to a computer program. The program is then monitored for exceptions such as crashes, or failed validation, or memory leaks.
Q677. Users have been reporting that their wireless access point is not functioning. They state that it allows slow connections to the internet, but does not provide access to the internal network. The user provides the SSID and the technician logs into the company’s access point and finds no issues. Which of the following should the technician do?
A. Change the access point from WPA2 to WEP to determine if the encryption is too strong
B. Clear all access logs from the AP to provide an up-to-date access list of connected users
C. Check the MAC address of the AP to which the users are connecting to determine if it is an imposter
D. Reconfigure the access point so that it is blocking all inbound and outbound traffic as a troubleshooting gap
Answer: C
Explanation:
The users may be connecting to a rogue access point. The rogue access point could be hosting a wireless network that has the same SSID as the corporate wireless network. The only way to tell for sure if the access point the users are connecting to is the correct one is to check the MAC address. Every network card has a unique 48-bit address assigned. A media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment. MAC addresses are used as a network address for most IEEE 802 network technologies, including Ethernet and WiFi. Logically, MAC addresses are used in the media access control protocol sublayer of the OSI reference model. MAC addresses are most often assigned by the manufacturer of a network interface controller (NIC) and are stored in its hardware, such as the card's read-only memory or some other firmware mechanism. If assigned by the manufacturer, a MAC address usually encodes the manufacturer's registered identification number and may be referred to as the burned-in address (BIA). It may also be known as an Ethernet hardware address (EHA), hardware address or physical address. This can be contrasted to a programmed address, where the host device issues commands to the NIC to use an arbitrary address. A network node may have multiple NICs and each NIC must have a unique MAC address. MAC addresses are formed according to the rules of one of three numbering name spaces managed by the Institute of Electrical and Electronics Engineers (IEEE): MAC-48, EUI-48, and EUI-64.
Q678. Which of the following is a penetration testing method?
A. Searching the WHOIS database for administrator contact information
B. Running a port scanner against the target's network
C. War driving from a target's parking lot to footprint the wireless network
D. Calling the target's helpdesk, requesting a password reset
Answer: D
Explanation:
Q679. In intrusion detection system vernacular, which account is responsible for setting the security policy for an organization?
A. Supervisor
B. Administrator
C. Root
D. Director
Answer: B
Explanation:
The administrator is the person responsible for setting the security policy for an organization and is responsible for making decisions about the deployment and configuration of the IDS.
Q680. A security technician at a small business is worried about the Layer 2 switches in the network suffering from a DoS style attack caused by staff incorrectly cabling network connections between switches.
Which of the following will BEST mitigate the risk if implemented on the switches?
A. Spanning tree
B. Flood guards
C. Access control lists
D. Syn flood
Answer: A
Explanation:
Spanning Tree is designed to eliminate network ‘loops’ from incorrect cabling between switches. Imagine two switches named switch 1 and switch 2 with two network cables connecting the switches. This would cause a network loop. A network loop between two switches can cause a ‘broadcast storm’ where a broadcast packet is sent out of all ports on switch 1 which includes two links to switch 2. The broadcast packet is then sent out of all ports on switch 2 which includes links back to switch 1. The broadcast packet will be sent out of all ports on switch 1 again which includes two links to switch 2 and so on thus flooding the network with broadcast traffic. The Spanning-Tree Protocol (STP) was created to overcome the problems of transparent bridging in redundant networks. The purpose of STP is to avoid and eliminate loops in the network by negotiating a loop-free path through a root bridge. This is done by determining where there are loops in the network and blocking links that are redundant. Spanning-Tree Protocol executes an algorithm called the Spanning-Tree Algorithm (STA). In order to find redundant links, STA will choose a reference point called a Root Bridge, and then determines all the available paths to that reference point. If it finds a redundant path, it chooses for the best path to forward and for all other redundant paths to block. This effectively severs the redundant links within the network. All switches participating in STP gather information on other switches in the network through an exchange of data messages. These messages are referred to as Bridge Protocol Data Units (BPDUs). The exchange of BPDUs in a switched environment will result in the election of a root switch for the stable spanning-tree network topology, election of designated switch for every switched segment, and the removal of loops in the switched network by placing redundant switch ports in a backup state.