Your success in Microsoft exam 70 412 is our sole target and we develop all our examcollection 70 412 braindumps in a way that facilitates the attainment of this target. Not only is our mcsa 70 412 study material the best you can find, it is also the most detailed and the most updated. 70 412 vce Practice Exams for Microsoft Windows Server exam 70 412 are written to the highest standards of technical accuracy.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-412 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Q31. You have a server named SCI that runs a Server Core Installation of Windows Server 2012 R2. Shadow copies are enabled on all volumes.
You need to delete a specific shadow copy. The solution must minimize server downtime.
Which tool should you use?
DiskShadow.exe is a tool that exposes the functionality offered by the Volume Shadow
Copy Service (VSS).
The diskshadow command delete shadows deletes shadow copies.
Reference: Technet, Diskshadow
Q32. Your network contains two Active Directory forests named contoso.com and corp.contoso.com.
User1 is a member of the DnsAdmins domain local group in contoso.com.
User1 attempts to create a conditional forwarder to corp.contoso.com but receive an error message shown in the exhibit. (Click the Exhibit button.)
You need to configure bi-directional name resolution between the two forests.
What should you do first?
A. Add User1 to the DnsUpdateProxy group.
B. Configure the zone to be Active Directory-integrated.
C. Enable the Advanced view from DNS Manager.
D. Run the New Delegation Wizard.
The zone must be Active Directory-integrated.
Q33. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed.
A technician performs maintenance on Server1.
After the maintenance is complete, you discover that you cannot connect to the IPAM server on Server1.
You open the Services console as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can connect to the IPAM server.
Which service should you start?
A. Windows Process Activation Service
B. Windows Event Collector
C. Windows Internal Database
D. Windows Store Service (WSService)
Explanation Windows Internal Database
Windows Internal Database is a relational data store that can be used only by Windows
roles and features.
IPAM does not support external databases. Only a Windows Internal Database is
IPAM stores 3 years of forensics data (IP address leases, host MAC addresses, user
login/logoff information) for 100,000 users in a Windows Internal Database. There is no
database purge policy provided, and the administrator must purge data manually as
Not A. IPAM works even if the Windows Process Activation Service is not running.
Not B. IPAM does not require the Windows Event Collector Service. It need to be running
on the managed DC/DNS/DHCP computers.
Not D. IPAM does not require the Windows Store Service. It provides infrastructure support
for Windows Store.This service is started on demand and if disabled applications bought
using Windows Store will not behave correctly.
Reference: IPAM Deployment Planning
Q34. Your network contains an Active Directory domain named contoso.com. The domain
contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. All three servers have the Hyper-V server role installed and the Failover Clustering feature installed.
Server1 and Server2 are nodes in a failover cluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-V Replica Broker role installed. The Hyper-V Replica Broker currently runs on Server1.
Server3 currently has no virtual machines.
You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replica server for Cluster1.
Which two tools should you use? (Each correct answer presents part of the solution. Choose two.)
A. The Hyper-V Manager console connected to Server3
B. The Failover Cluster Manager console connected to Server3
C. The Hyper-V Manager console connected to Server1.
D. The Failover Cluster Manager console connected to Cluster1
E. The Hyper-V Manager console connected to Server2
A. To configure the Replica server [on a server that is not part of a cluster which in this case is Server3] In Hyper-V Manager, click Hyper-V Settings in the Actions pane. In the Hyper-V Settings dialog, click Replication Configuration.
In the Details pane, select Enable this computer as a Replica server. Etc.
D. To configure a Replica server that is part of a failover cluster.
1. In Server Manager, open Failover Cluster Manager.
2. In the left pane, connect to the cluster, and while the cluster name is highlighted, click Roles in the Navigate category of the Details pane.
3. Right-click the role and choose Replication Settings.
4. In the Details pane, select Enable this cluster as a Replica server. Etc.
Reference: Deploy Hyper-V Replica , Step 2: Enable Replication
Q35. Your network contains an Active Directory domain named contoso.com. The network contains a file server named Server1 that runs Windows Server 2012 R2.
You are configuring a central access policy for temporary employees.
You enable the Department resource property and assign the property a suggested value of Temp.
You need to configure a target resource condition for the central access rule that is scoped to resources assigned to Temp only.
Which condition should you use?
A. (Temp.Resource Equals "Department")
B. (Resource.Temp Equals "Department")
C. (Resource.Department Equals "Temp")
D. (Department.Value Equals "Temp")
Targeting: Resource.Department Contains Finance
Access rule: Allow read User.Country=Resource.Country AND User.department =
Reference: Deploy a Central Access Policy (Demonstration Steps)
Q36. You have a server named Server1 that runs Windows Server 2012 R2 and is used for testing.
A developer at your company creates and installs an unsigned kernel-mode driver on Server1. The developer reports that Server1 will no longer start.
You need to ensure that the developer can test the new driver. The solution must minimize the amount of data loss.
Which Advanced Boot Option should you select?
A. Disable Driver Signature Enforcement
B. Disable automatic restart on system failure
C. Last Know Good Configuration (advanced)
D. Repair Your Computer
A. By default, 64-bit versions of Windows Vista and later versions of Windows will load a kernel-mode driver only if the kernel can verify the driver signature. However, this default behavior can be disabled to facilitate early driver development and non-automated testing.
Not B. specifies that Windows automatically restarts your computer when a failure occurs.
Not C. Developer would not be able to test the driver as needed.
Not D. Removes or repairs critical windows files, Developer would not be able to test the
driver as needed and some file loss.
Reference: Installing Windows Server 2012.
Q37. Your network contains an Active Directory domain named adatum.com. You create a new
Group Policy object (GPO) named GPO1.
You need to verify that GPO1 was replicated to all of the domain controllers.
Which tool should you use?
C. Group Policy Management
D. Active Directory Sites and Services
In Windows Server 2012, the Group Policy Management Console (GPMC) was enhanced to provide a report for the overall health state of the Group Policy infrastructure for a domain, or to scope the health view to a single GPO.
Reference: Check Group Policy Infrastructure Status
Q38. Your network contains an Active Directory forest named contoso.com. The contoso.com domain only contains domain controllers that run Windows Server 2012 R2.
The forest contains a child domain named child.contoso.com. The child.contoso.com domain only contains domain controllers that run Windows Server 2008 R2. The child.contoso.com domain contains a member server named Server1 that runs Windows Server 2012 R2.
You have access to four administrative user accounts in the forest. The administrative user accounts are configured as shown in the following table.
You need to ensure that you can add a domain controller that runs Windows Server 2012 R2 to the child.contoso.com domain.
Which account should you use to run adprep.exe?
Adprep.exe performs operations that must be completed on the domain controllers that run
in an existing Active Directory environment before you can add a domain controller that
runs that version of Windows Server.
Preparing to run adprep /domainprep (see step 2 below).
To help ensure that the adprep /domainprep command runs successfully, complete these
steps before you run the command on the infrastructure operations master role holder in
. Make sure that the schema updates that adprep /forestprep performs replicated throughout the forest or that they at least replicated to the infrastructure master for the domain where you plan to run adprep /domainprep.
. Make sure that you can log on to the infrastructure master with an account that is a member of the Domain Admins group. . Verify that the domain functional level is appropriate.
Reference: Running Adprep.exe
Q39. DRAG DROP
Your network contains an Active Directory domain named contoso.com. All file servers in the domain run Windows Server 2012 R2.
The computer accounts of the file servers are in an organizational unit (OU) named OU1. A Group Policy object (GPO) named GPO1 is linked to OU1.
You plan to modify the NTFS permissions for many folders on the file servers by using central access policies.
You need to identify any users who will be denied access to resources that they can currently access once the new permissions are implemented.
In which order should you Perform the five actions?
Q40. Your network contains two servers named HV1 and HV2. Both servers run Windows Server 2012 R2 and have the Hyper-V server role installed.
HV1 hosts 25 virtual machines. The virtual machine configuration files and the virtual hard disks are stored in D:VM.
You shut down all of the virtual machines on HV1.
You copy D:VM to D:VM on HV2.
You need to start all of the virtual machines on HV2. You want to achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. Run the Import-VMInitialReplication cmdlet.
B. From HV1, export all virtual machines to D:VM. Copy D:VM to D:VM on HV2 and overwrite the existing files. On HV2, run the Import Virtual Machine wizard.
C. From HV1, export all virtual machines to D:VM. Copy D:VM to D:VM on HV2 and overwrite the existing files. On HV2, run the New Virtual Machine wizard.
D. Run the Import-VM cmdlet.
Imports a virtual machine from a file.
Imports the virtual machine from its configuration file. The virtual machine is registered in-
place, so its files are not copied.
PS C:> Import-VM –Path 'D:TestVirtualMachines5AE40946-3A98-428E-8C83-081A3C6BD18C.XML'