It is more faster and easier to pass the Cisco cisco 300 320 dumps exam by using Pinpoint Cisco ARCH Designing Cisco Network Service Architectures questuins and answers. Immediate access to the Abreast of the times ccdp arch 300 320 Exam and find the same core area ccdp arch 300 320 questions with professionally verified answers, then PASS your exam with a high score now.


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 300-320 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 300-320 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/300-320-exam-dumps.html

P.S. Pinpoint 300-320 braindump are available on Google Drive, GET MORE: https://drive.google.com/open?id=1M7RtuYi-RUTAx_AtPEsA3dyJpcz-AGCV


New Cisco 300-320 Exam Dumps Collection (Question 4 - Question 13)

Question No: 4

To support the enterprise high-availability requirements, which workgroup switch technology can be used to interconnect multiple switches into a single logical unit?

A. StackWise

B. EtherChannel

C. vPC

D. Flex Links

E. VSS

Answer: A


Question No: 5

In a base e-Commerce module design, which routing statement is correct?

A. Routing is mostly static.

B. Hardcoded IP addresses are used to support failover.

C. Inbound servers use the CSM or ACE as the default gateway.

D. VLANs between the access layer switches are used for FHRP protocols.

Answer: A

Explanation: https://www.safaribooksonline.com/library/view/foundation-learning-guide/9780132652933/ch07.html

"Base Design Routing Logic Routing in this e-commerce module design is mostly static, using VIP addresses to support failover."


Question No: 6

Port security supports which type of port?

A. SPAN destination port

B. EtherChannel port-channel port

C. Nonnegotiating trunk port

D. DTP-enabled trunk port

Answer: C


Question No: 7

Addressing QoS design in the Enterprise Campus network for IP Telephony applications means what?

A. It is critical to identify aggregation and rate transition points in the network, where preferred traffic and congestion QoS policies should be enforced

B. Suspect traffic should be dropped closest to the source, to minimize wasting network resources

C. An Edge traffic classification scheme should be mapped to the downstream queue configuration

D. Applications and Traffic flows should be classified, marked and policed within the

Enterprise Edge of the Enterprise Campus network

Answer: A

Explanation: https://www.cisco.com/c/en/us/support/docs/switches/catalyst-4500-series- switches/69632-configuring-cat-ip-phone.html#topic1

When you connect an IP phone to a switch using a trunk link, it can cause high CPU utilization in the switches. As all the VLANs for a particular interface are trunked to the phone, it increases the number of STP instances the switch has to manage. This increases the CPU utilization. Trunking also causes unnecessary broadcast / multicast / unknown unicast traffic to hit the phone link. In order to avoid this, remove the trunk configuration and keep the voice and access VLAN configured along with Quality of Service (QoS). Technically, it is still a trunk, but it is called a Multi-VLAN

Access Port (MVAP). Because voice and data traffic can travel through the same port, you should specify a different VLAN for each type of traffic. You can configure a switch port to forward voice and data traffic on different VLANs. Configure IP phone ports with a voice VLAN configuration. This configuration creates a pseudo trunk, but does not require you to manually prune the unnecessary VLANs.


Question No: 8

Which three options are recommended practices when configuring VTP? (Choose three.)

A. Set the switch to transparent mode.

B. Set the switch to server mode.

C. Enable VLAN pruning.

D. Disable VLAN pruning.

E. Specify a domain name.

F. Clear the domain name.

Answer: A,D,E

Explanation:

http://www.ciscopress.com/articles/article.asp?p=1315434&seqNum=2


Question No: 9

How does ERS use the VLAN tag?

A. to provide service internetworking

B. to support transparency for Layer 2 frames

C. as a connection identifier to indicate destination

D. as a mapping to the DLCI in service internetworking

E. to provide a trunk by which all VLANs can navigate from one site to one or multiple sites

Answer: C


Question No: 10

Which of these practices should you follow when designing a Layer 3 routing protocol?

A. Never peer on transit links.

B. Build squares for deterministic convergence.

C. Build inverted U designs for deterministic convergence.

D. Summarize routes at the distribution to the core to limit EIGRP queries or OSPF LSA propagation.

Answer: D


Question No: 11

What is the recommended radius of a cell for a voice-ready wireless network?

A. 6 dBm

B. 7 dBm

C. 19 dBm

D. 5 dBm

E. -67 dBm

F. -86 dBm

Answer: E

Explanation: https://www.safaribooksonline.com/library/view/foundation-learning-guide/9780132652933/app03.html

"Recommendations for VoWLAN deployment include the following:

A cell radius of 67 dBm, with a separation of 19 dBm for cells on the same channel."


Question No: 12

A company's virtualization team wants to transfer control of network switching and policy management for VMware virtual servers to the networking team. What Cisco network virtualization solution should be implemented?

A. Unified Computing System

B. Nexus distributed virtual switch

C. virtual network agent

D. Nexus unified fabric switch

Answer: B

Explanation: Nexus 1000v


Question No: 13

A network engineer must provide 40mb connections from the data center to the corporate office and two remote offices. What WAN connectivity option will outsource the routing in cooperation with the service provider?

A. Ethernet Private Line

B. Ethernet Multipoint Service

C. MPLS VPN

D. VPLS

Answer: C


Recommend!! Get the Pinpoint 300-320 dumps in VCE and PDF From Certifytools, Welcome to download: https://www.certifytools.com/300-320-exam.html (New 482 Q&As Version)