The Rebirth Guide To HPE0-S58 Test Engine

NEW QUESTION 1
Which component must be deployed at the customer site and is essential for HPE InfoSight for Servers?

• A. HPE Intelligent Provisioning
• B. HPE Global Dashboard
• C. iLO Amplifier Pack
• D. HPE Composer

Answer: C

Explanation:
References: https://www.slideshare.net/Xylos/hpe-infosight-for-servers

NEW QUESTION 2
A customer is considering implementing a DRS cluster, but they would like to know how DRS can help to achieve performance goals.
How should an integrator respond?

• A. When powering on a virtual machine, a DRS cluster can automatically place it on the optimal host.
• B. Selected virtual machines will be assigned higher priority when the amount of physical resources will drop below a specific level.
• C. A DRS cluster will migrate a virtual machine to a different host when available network bandwidth will drop below a specific level.
• D. If more than 50 virtual machines will be running on a single host, DRS cluster will configure CPU affinity to proportional resource allocation.

Answer: B

NEW QUESTION 3
What must an integrator do before an existing cluster can be imported to the HPE Composer?

• A. The vCenter Server must be integrated with the HPE Composer
• B. The cluster must be vSAN enabled
• C. The HPE Composer must have at least two management interfaces to connect to the cluster
• D. The cluster must be enabled for HPE Composer integration

Answer: A

NEW QUESTION 4
A Synergy integrator is unable to assign an HPE 3PAR Virtual Volume to a new server profile in HPE Composer. The Virtual Volume has been previously assigned to another profile.
Which setting in HPE Composer is preventing the integrator from assigning the volume to the new profile?

• A. private, in the volume properties
• B. shared, in the volume properties
• C. private, in the storage pool properties
• D. shared, in the storage pool properties

Answer: D

NEW QUESTION 5
A customer is planning an HPE Synergy solution with 20 frames and needs to minimize the number of management ports that are required to connect the frames into the existing management network.
Which procedure should the integrator use to address the customer’s concern?

• A. Connect the RJ-45 front ports of each frame to an external switc
• B. Then, connect the uplink from the external switch into the customer’s management network.
• C. Connect FLMs from all frames to two external switches for redundanc
• D. Then, connect the two uplinks from the two switches into the customer’s management network.
• E. Connect the RJ-45 front ports of each frame to two external switches for redundanc
• F. Then, connect the uplink from the two switches into the customer’s management network.
• G. Connect FLMs from all frames into a management rin
• H. Then, connect the management ring to the customer’s management network using two uplinks.

Answer: D

NEW QUESTION 6
An integrator is installing three Synergy frames in different locations for a customer. As part of the installation, the customer requests a single monitoring dashboard that shows the current hardware status, warranty status, and open support cases of all three frames.
Which configuration steps must the integrator perform to provide the customer with this functionality?

• A. Enable Remote Support and Insight Online Integration in the Composer UI
• B. Install Insight Remote Support Advanced, and integrate it with HPE Global Dashboard
• C. Configure OneView with iLO Amplifier pack
• D. Activate iLO Federation on all installed compute nodes

Answer: C

NEW QUESTION 7
A customer needs to evaluate Image Streamer as Proof-of-Concept (PoC) in a test and development tab environment.
At a minimum, what does a Synergy integrator need in order to support this requirement?

• A. a three-frame environment with redundant composer and Image Streamer appliances
• B. a single frame with single composer and Image Streamer appliances
• C. a two-frame environment with single composer and Image Streamer appliances
• D. a single frame with redundant Image Streamer appliances

Answer: B

NEW QUESTION 8
A customer needs to significantly improve I/O performance to a database server.
Which product should an integrator implement as part of a Synergy composable solution?

• A. HPE Synergy D3940 storage module with SSD drives
• B. HPE Composer with NVMe drives
• C. HPE Synergy compute module with a Tesla accelerator
• D. HPE Synergy Image Streamer

Answer: A

NEW QUESTION 9
Refer to the exhibit.

A customer with the design shown needs to perform an in-place upgrade to its environment to scale the two-frame single homed Multimodule Link Aggregation Group (MLAG) configuration to a three-frame
configuration. The new frame needs to provide a redundant 20Gb connection for the compute module ports in Fabric 3.
Which interconnect modules should the integrator use in Frame 3?

• A. HPE Virtual Connect SE 40Gb F8 module in bay 3 and HPE Virtual Connect SE 40Gb F8 Module in bay 6
• B. HPE Synergy 10Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6
• C. HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 20Gb Interconnect Link Module in bay 6
• D. HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6

Answer: B

NEW QUESTION 10
Using a two-port FLM, what is the minimum number of frames needed to implement a solution that includes redundant Composers and Image Streamers?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: C

NEW QUESTION 11
Which tool should an integrator use to determine the power requirements of an HPE Synergy solution?

• A. HPE Product Bulletin
• B. HPE SalesBuilder for Windows
• C. HPE Synergy Planning Tool
• D. HPE SPOCK

Answer: C

NEW QUESTION 12
A customer with a 3-frame Synergy composable infrastructure has received a second rack to expand existing composable infrastructure resource pools. The integrator has cabled the management ring as shown.
Which steps should the integrator take to increase availability of this configuration (Choose two.)

• A. Move on Composer to Rack 2
• B. Move both Composers to Rack 2
• C. Enable multi-rack high availability in HPE OneView
• D. Move both management uplinks to Rack 2
• E. Move one management uplink to Rack 2

Answer: BE

NEW QUESTION 13
A customer is unable to boot to a 3.5TB volume created and presented to a compute node. What is likely preventing the boot?

• A. The system is set to UEFI instead of Legacy Boot mode
• B. The system is set to Legacy Boot mode instead of UEFI
• C. Boot volumes larger than 2.2TB are not supported on Synergy
• D. Boot volumes larger than 3TB are not supported on HPE Synergy

Answer: B

Explanation:
References: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05351907

NEW QUESTION 14
An HPE Synergy compute module has a template-based server profile with two identically configured connections, each containing five VLANs.
What is the most efficient method the integrator can use to add a new VLAN to each connection?

• A. Add the new VLAN to the network set configured in the profile template, and update the server profile from the template
• B. Add the new VLAN under Edit server profile connections
• C. Add the new VLAN to the network set configured in the profile template
• D. Add the new VLAN under Edit server profile connections in the profile template, and update the server profile from the template

Answer: A

NEW QUESTION 15
Which policy can an integrator apply when creating a datastore using HPE OneView for vCenter Server?

• A. Data at Rest encryption policy
• B. Round Robin load balancing policy
• C. Recovery Manager Central policy
• D. virtual machine Restart policy

Answer: C

NEW QUESTION 16
Which storage solution can be used for volume provisioning using HPE Composer?

• A. MSA 2040
• B. HPE StoreEasy 1560
• C. HPE 3PAR StoreServ
• D. HPE XP7 Storage

Answer: C

Explanation:
References: https://www.karma-group.ru/upload/iblock/30b/hpe_synergy_composer.pdf

NEW QUESTION 17
A customer needs to deploy additional management components, such as vCenter Server and HPE Global Dashboard.
According to HPE best practices, how should an integrator deploy these components?

• A. Deploy VMware HA cluster on two dedicated management servers, then deploy management components to this cluster.
• B. Deploy vCenter Server as a virtual machine on the Hyper-V host and HPE Global Dashboard to the domain controller.
• C. Install vCenter Server on the domain controller, then deploy HPE Global Dashboard to the HPE Composer or HPE OneView appliance.
• D. Deploy vCenter Server to any Windows machine, and install HPE Global Dashboard on the same server.

Answer: B

NEW QUESTION 18
A customer has a Hyper-V and ESXi hypervisors deployed on an HPE Synergy platform. The customer needs a tool that will provide health and performance monitoring. Because their environment is very dynamic, the tool should also help them to optimize performance and predict and prevent problems.
Which tool should the customer use?

• A. HPE InfoSight
• B. HPE OneView for vCenter Server
• C. HPE Composer
• D. HPE Global Dashboard

Answer: C

NEW QUESTION 19
Refer to the exhibit.

An integrator needs to add an FCoE connection to the server profile, but the FCoE connection type is not available.
What is the likely cause of this issue?

• A. FCoE capable interconnect modules are not installed in the Synergy frame
• B. Defined FCoE network is not associated with a SAN or does not have VLAN Id defined
• C. A FCoE connection is not available, as there is no LIG configured for FCoE connectivity
• D. The FCoE connection has not been added as a Fibre Channel connection within a server profile

Answer: D

NEW QUESTION 20
Which HPE Synergy D3940 storage module configuration is valid?

• A. a single RAID set to be shared across the SAS fabric to multiple compute nodes as a virtualization host datastore
• B. maximum of three HPE Synergy D3940 storage modules per frame to be used by any compute module within the management ring
• C. any number of the drives from storage module to be mapped to any single compute node
• D. a pair of disks to house Composer backups and Synergy firmware bundles

Answer: A

NEW QUESTION 21
Which management tool required by HPE Infosight must be deployed at the customer site?

• A. HPE Global Dashboard
• B. HPE OneView
• C. HPE iLO Amplifier
• D. HPE StoreServ Management Console (SSMC)

Answer: C

NEW QUESTION 22
Match each HPE server platform with optimal workload.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 23
......