Up To The Minute NSE7_LED-7.0 Vce For Fortinet NSE 7 - LAN Edge 7.0 Certification

NEW QUESTION 1
Exhibit.

Refer to the exhibit showing a network topology and SSID settings.
FortiGate is configured to use an external captive portal However wireless users are not able to see the captive portal login page
Which configuration change should the administrator make to fix the problem?

• A. Enable NAT in the firewall policy with the ID 13.
• B. Add the FortiAuthenticator and WindowsAD address objects as exempt destinations services
• C. Enable the captive-portal-exempt option in the firewall policy with the ID 12
• D. Remove the guest.portal user group in the firewall policy with the ID 12

Answer: B

Explanation:
According to the exhibit, the network topology and SSID settings show that FortiGate is configured to use an external captive portal hosted on FortiAuthenticator, which is connected to a Windows AD server for user authentication. However, wireless users are not able to see the captive portal login page, which means that they are not redirected to the external captive portal URL. Therefore, option B is true because adding the FortiAuthenticator and WindowsAD address objects as exempt destinations services will allow the wireless users to access the external captive portal URL without being blocked by the firewall policy. Option A is false because enabling NAT in the firewall policy with the ID 13 will not affect the redirection to the external captive portal URL, but rather the source IP address of the wireless traffic. Option C is false because enabling the captive-portal-exempt option in the firewall policy with the ID 12will bypass the captive portal authentication for the wireless users, which is not the desired outcome. Option D is false because removing the guest.portal user group in the firewall policy with the ID 12 will prevent the wireless users from being authenticated by FortiGate, which is required for accessing the external captive portal.

NEW QUESTION 2
A wireless network in a school provides guest access using a captive portal to allow unregistered users to self-register and access the network The administrator is requested to update the existing configuration to provide captive portal authentication through a secure connection (HTTPS)
Which two changes must the administrator make to enforce HTTPS authentication"? (Choose two >

• A. Create a new SSID with the HTTPS captive portal URL
• B. Enable HTTP redirect in the user authentication settings
• C. Disable HTTP administrative access on the guest SSID to enforce HTTPS connection
• D. Update the captive portal URL to use HTTPS on FortiGate and FortiAuthenticator

Answer: BD

Explanation:
According to the FortiGate Administration Guide, “To enable HTTPS authentication, you must enable HTTP redirect in the user authentication settings. This redirects HTTP requests to HTTPS. You must also update the captive portal URL to use HTTPS on both FortiGate and FortiAuthenticator.” Therefore, options B and D are true because they describe the changes that the administrator must make to enforce HTTPS authentication for the captive portal. Option A is false because creating a new SSID with the HTTPS captive portal URL is not required, as the existing SSID can be updated with the new URL. Option C is false because disabling HTTP
administrative access on the guest SSID will not enforce HTTPS connection, but rather block HTTP connection.

NEW QUESTION 3
Refer to the exhibit.

Examine the FortiGate configuration FortiAnalyzer logs and FortiGate widget shown in the exhibit
An administrator is testing the Security Fabric quarantine automation The administrator added FortiAnalyzer to the Security Fabric and configured an automation stitch to automatically quarantine compromised devices The test device (::.:.:.!) s connected to a managed Fort Switch dev :e
After trying to access a malicious website from the test device, the administrator verifies that FortiAnalyzer has a log (or the test connection However the device is not getting quarantined by FortiGate as shown in the quarantine widget
Which two scenarios are likely to cause this issue? (Choose two)

• A. The web filtering rating service is not working
• B. FortiAnalyzer does not have a valid threat detection services license
• C. The device does not have FortiClient installed
• D. FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC)

Answer: BD

Explanation:
According to the exhibits, the administrator has configured an automation stitch to automatically quarantine compromised devices based on FortiAnalyzer’s threat detection services. However, according to the FortiAnalyzer logs, the test device is not detected as compromised by FortiAnalyzer, even though it tried to access a malicious website. Therefore, option B is true because FortiAnalyzer does not have a valid threat detection services license, which is required to enable the threat detection services feature. Option D is also true because FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC), which is a criterion for identifying compromised devices. Option A is false because the web filtering rating service is working, as shown by the log entry that indicates that the test device accessed a URL with a category of “Malicious Websites”. Option C is false because the device does not need to have FortiClient installed to be quarantined by FortiGate, as long as it is connected to a managed FortiSwitch device.

NEW QUESTION 4
What is the purpose of enabling Windows Active Directory Domain Authentication on FortiAuthenticator?

• A. It enables FortiAuthenticator to use Windows administrator credentials to perform an LDAP lookup for a user search
• B. It enables FortiAuthenticator to use a Windows CA certificate when authenticating RADIUS users
• C. It enables FortiAuthenticator to import users from Windows AD
• D. It enables FortiAuthenticator to register itself as a Windows trusted device to proxy authentication using Kerberos

Answer: D

Explanation:
According to the FortiAuthenticator Administration Guide2, “Windows Active Directory domain authentication enables FortiAuthenticator to join a Windows Active Directory domain as a machine entity and proxy authentication requests using Kerberos.” Therefore, option D is true because it describes the purpose of enabling Windows Active Directory domain authentication on FortiAuthenticator. Option A is false because FortiAuthenticator does not need Windows administrator credentials to perform an LDAP lookup for a user search. Option B is false because FortiAuthenticator does not use a Windows CA certificate when authenticating RADIUS users, but rather its own CA certificate. Option C is false because FortiAuthenticator does not import users from Windows AD, but rather synchronizes them using LDAP or FSSO.

NEW QUESTION 5
Where can FortiGate learn the FortiManager IP address or FQDN for zero-touch provisioning'?

• A. From an LDAP server using a simple bind operation
• B. From a TFTP server
• C. From a DHCP server using options 240 and 241
• D. From a DNS server using A or AAAA records

Answer: D

Explanation:
According to the FortiGate Administration Guide, “FortiGate can learn the FortiManager IP address or FQDN for zero-touch provisioning from a DNS server using A or AAAA records. The DNS server must be configured to resolve the hostname fortimanager.fortinet.com to the IP address or FQDN of the FortiManager device.” Therefore, option D is true because it describes the method for FortiGate to learn the FortiManager IP address or FQDN for zero-touch provisioning. Option A is false because LDAP is not used for zero-touch provisioning. Option B is false because TFTP is not used for zero-touch provisioning. Option C is false because DHCP options 240 and 241 are not used for zero-touch provisioning.

NEW QUESTION 6
Which CLI command should an administrator use to view the certificate verification process in real time?

• A. diagnose debug application foauthd -1
• B. diagnose debug application radiusd -1
• C. diagnose debug application authd -1
• D. diagnose debug application fnbamd -1

Answer: A

Explanation:
According to the FortiOS CLI Reference Guide, “The diagnose debug application foauthd command enables debugging of certificate verification process in real time.” Therefore, option A is true because it describes the CLI command that an administrator should use to view the certificate verification process in real time. Option B is false because diagnose debug application radiusd -1 enables debugging of RADIUS authentication process, not certificate verification process. Option C is false because diagnose debug application authd -1 enables debugging of authentication daemon process, not certificate verification process. Option D is false because diagnose debug application fnbamd -1 enables debugging of FSSO daemon process, not certificate verification process.

NEW QUESTION 7
An administrator has configured an SSID in bridge mode for corporate employees All APs are online and provisioned using default AP profiles Employees are unable to locate the SSID to conned
Which two configurations can the administrator verify? (Choose two)

• A. Verify that the broadcast SSID option is enabled in the SSID configuration
• B. Verify that the Block Intra-SSID Traffic (intra-vap-privacy) option in the SSID configuration is disabled
• C. Verify that the SSID to an AP group that should be broadcasting the SSID is applied
• D. Verify that the SSID is manually applied on AP profiles for both 2 4 GHz and 5 GHz radios

Answer: AC

Explanation:
According to the FortiAP Configuration Guide1, “To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled. You must also enable Broadcast SSID.” Therefore, option A is true because the broadcast SSID option allows the SSID to be visible to wireless clients. Option C is also true because the SSID must be applied to an AP group that contains the APs that should be broadcasting the SSID. According to the same guide1, “You can create AP groups and assign them to different locations or departments. You can then apply different settings, such as SSIDs, to each group.” Option B is false because blocking intra-SSID traffic prevents wireless clients on the same SSID from communicating with each other, which is not related to broadcasting the SSID. Option D is false because the SSID can be applied to an AP group or a global profile, which will automatically apply to all APs, without manually configuring each AP profile.

NEW QUESTION 8
Refer to the exhibit

Examine the sections of the configuration shown in the output
What action will FortiGate take when verifying the student certificate through OCSP?

• A. Reject the student certificate if the OCSP server replies that the student certificate status is unknown
• B. Not verify the OCSP server certificate
• C. Use the OCSP URL included in the student certificate to verify the student certificate
• D. Consider the student certificate status as valid if the OCSP server is unreachable

Answer: C

Explanation:
According to the exhibit, the FortiGate configuration has ocsp-status enabled and ocsp-option set to certificate.
This means that FortiGate will use OCSP to verify the revocation status of certificates presented by
clients. According to the FortiGate Administration Guide2, “If you select certificate, FortiGate uses an OCSP URL included in a certificate to verify that certificate.” Therefore, option C is true because it describes what action FortiGate will take when verifying the student certificate through OCSP. Option A is false because FortiGate will not reject the student certificate if the OCSP server replies that the student certificate status is unknown, but rather accept it as valid. Option B is false because FortiGate will verify the OCSPserver certificate by default, unless strict-ocsp-check is disabled. Option D is false because FortiGate will not consider the student certificate status as valid if the OCSP server is unreachable, but rather reject it as invalid.

NEW QUESTION 9
Refer to the exhibits.

Firewall Policy

Examine the firewall policy configuration and SSID settings
An administrator has configured a guest wireless network on FortiGate using the external captive portal The administrator has verified that the external captive portal URL is correct However wireless users are not able to see the captive portal login page
Given the configuration shown in the exhibit and the SSID settings which configuration change should the administrator make to fix the problem?

• A. Disable the user group from the SSID configuration
• B. Enable the captivs-portal-exempt option in the firewall policy with the ID 11.
• C. Apply a guest.portal user group in the firewall policy with the ID 11.
• D. Include the wireless client subnet range in the Exempt Source section

Answer: C

Explanation:
According to the FortiGate Administration Guide, “To use an external captive portal, you must configure a user group that uses the external captive portal as the authentication method and apply it to a firewall policy.” Therefore, option C is true because it will allow the wireless users to be redirected to the external captive portal URL when they try to access the Internet. Option A is false because disabling the user group from the SSID configuration will prevent the wireless users from being authenticated by the FortiGate device. Option B is false because enabling the captive-portal-exempt option in the firewall policy will bypass the captive portal authentication for the wireless users, which is not the desired outcome. Option D is false because including the wireless client subnet range in the Exempt Source section will also bypass the captive portal authentication for the wireless users, which is not the desired outcome.

NEW QUESTION 10
Refer to the exhibit

Examine the FortiGate RSSO configuration shown in the exhibit
FortiGate is configured to receive RADIUS accounting messages on port3 to authenticate RSSO users The users are located behind port3 and the internet link is connected to port1 FortiGate is processing incoming RADIUS accounting messages successfully and RSSO users are getting associated with the RSSO Group user group However all the users are able to access the internet, and the administrator wants to restrict internet access to RSSO users only
Which configuration change should the administrator make to fix the problem?

• A. Change the RADIUS Attribute Value selling to match the name of the RADIUS attribute containing the group membership information of the RSSO users
• B. Add RSSO Group to the firewall policy
• C. Enable Security Fabric Connection on port3
• D. Create a second firewall policy from port3 lo port1 and select the target destination subnets

Answer: B

Explanation:
According to the exhibit, the firewall policy from port3 to port1 has no user group specified, which means that it allows all users to access the internet. Therefore, option B is true because adding RSSO Group to the firewall policy will restrict internet access to RSSO users only. Option A is false because changing the RADIUS Attribute Value setting will not affect the firewall policy, but rather the RSSO user group membership. Option C is false because enabling Security Fabric Connection on port3 will not affect the firewall policy, but rather the communication between FortiGate and other Security Fabric devices. Option D is false because creating a second firewall policy from port3 to port1 will not affect the existing firewall policy, but rather create a redundant or conflicting policy.

NEW QUESTION 11
Refer to the exhibit.

Examine the LDAP server configuration shown in the exhibit Note that the Username setting has been expanded to display Its full content
On the Windows AD server 10.0.1.10, the administrator used dsquery. which returned the following output:

According to the output which FortiGate LDAP setting is configured incorrectly''

• A. Common Name Identifier
• B. Bind Type
• C. Distinguished Name
• D. Username

Answer: C

Explanation:
According to the exhibits, the LDAP server configuration on FortiGate has the Distinguished Name set to “dc=training,dc=lab”. However, according to the output of the dsquery command on the Windows AD server, the Distinguished Name of the domain should be “dc=trainingAD,dc=training,dc=lab”. Therefore, option C is true because the Distinguished Name on FortiGate is configured incorrectly and does not match the actual Distinguished Name of the domain. Option A is false because the Common Name Identifier on FortiGate is configured correctly as “cn”. Option B is false because the Bind Type on FortiGate is configured correctly as “Regular”. Option D is false because the Username on FortiGate is configured correctly as “cn=admin,cn=users,dc=trainingAD,dc=training,dc=lab”.

NEW QUESTION 12
......