Printable N10-007 Exam Questions and Answers 2021

NEW QUESTION 1
A network technician is trying to terminate CAT5 modular jacks. Which of the following tools would be MOST appropriate for this scenario?

• A. Crimper
• B. OTDR
• C. Throughput tester
• D. Punch down tool

Answer: D

NEW QUESTION 2
Privilege creep among long-term employees can be mitigated by which of the following procedures?

• A. User permission reviews
• B. Mandatory vacations
• C. Separation of duties
• D. Job function rotation

Answer: A

NEW QUESTION 3
A network technician configures a firewall’s ACL to allow outgoing traffic for several popular services such as email and web browsing. However, after the firewall’s deployment, users are still unable to retrieve their
emails. Which of the following would BEST resolve this issue?

• A. Allow the firewall to accept inbound traffic to ports 25, 67, 179, and 3389
• B. Allow the firewall to accept inbound traffic to ports 80, 110, 143, and 443
• C. Set the firewall to operate in transparent mode
• D. Allow the firewall to accept inbound traffic to ports 21, 53, 69, and 123

Answer: B

NEW QUESTION 4
A router is set up to utilize RIPv2 to route traffic throughout the network. Which of the following routing metrics is used to determine the path?

• A. Distance
• B. bandwidth
• C. Speed
• D. hop count

Answer: D

NEW QUESTION 5
Which of the following devices should a network administrator configure on the outermost part of the network?

• A. Media converter
• B. Switch
• C. Modem
• D. Firewall

Answer: D

NEW QUESTION 6
A workstation on the network is configured as follows. A user reports that they are unable to print to a device located on a different subnet. Which of the following is the MOST likely problem?
IP address: 172.16.204.12
Subnet Mask: 255.255.0.0
Default Gateway: 172.15.204.254
DNS address: 172.16.204.1
Broadcast address: 172.16.255.255

• A. DNS address
• B. Subnet mask
• C. Default gateway
• D. Broadcast address
• E. IP address

Answer: C

NEW QUESTION 7
Which of the following describes a DNS server?

• A. Translates an IP address to a name
• B. Caches commonly viewed web pages
• C. Assigns IP addresses to network devices
• D. Provides port security for a network

Answer: A

NEW QUESTION 8
A network technician needs to connect to a remote router to modify the configuration, Which of the following method should the technician use to connected to the device security? (Select TWO)

• A. Telnet
• B. VNC
• C. SSH
• D. RDP
• E. HTTPS
• F. TFTP

Answer: BC

NEW QUESTION 9
Which of the following should a technician investigate when using a network baseline to troubleshoot?

• A. Tracing a network wire connectivity issue from the datacenter to a host.
• B. Determining if the server performance is degraded.
• C. Changes that have been made to the network configuration.
• D. Location of networking equipment in a rack.

Answer: B

NEW QUESTION 10
A network administrator has created a virtual machine in the cloud. The technician would like to connect to the server remotely using RDP.
Which of the following default ports needs to be opened?

• A. 445
• B. 3389
• C. 5004
• D. 5060

Answer: B

NEW QUESTION 11
A technician is diagnosing an issue with a new T1 connection. The router is configured, the cable is connected, but the T1 is down. To verify the configuration of the router, which of the following tools should the technician use?

• A. Loopback adapter
• B. Cable tester
• C. Tone generator
• D. Multimeter

Answer: A

NEW QUESTION 12
A network technician is repurposing a switch that has been in storage for some time. The device has been wiped to factory defaults. Which of the following should be done FIRST to ensure the device has been hardened before configuration?

• A. Generate new keys.
• B. Disable unused ports.
• C. Check for updated firmware.
• D. Configure the default VLAN.

Answer: C

NEW QUESTION 13
A VoIP system will require 23 concurrent voice channels and signaling channel. Which of the following types of service would provides the BEST connectivity to the PSTN?

• A. PRI
• B. BRI
• C. E1/E3
• D. DSL

Answer: A

NEW QUESTION 14
A network technician has just configured NAC for connections using Cat 6 cables. However, none of the Windows clients can connect to the network.
Which of the following components should the technician check on the Windows workstations? (Choose two.)

• A. Start the Wired AutoConfig service in the Services console
• B. Enable IEEE 802.1q Authentication in Network Interface Card Properties
• C. Enable IEEE 802.1x Authentication in Network Interface Card Properties
• D. Start the Wireless AutoConfig service in the Services console
• E. Enable IEEE 802.3 Ethernet IPv6 in Network Interface Card Properties

Answer: AC

NEW QUESTION 15
Which of the following protocols do MOST MITM attacks utilize?

• A. ARP
• B. SIP
• C. FTP
• D. SCP

Answer: A

NEW QUESTION 16
A network administrator would like to collect information from several networking devices using SNMP. Which of the following SNMP options should a network administrator use to ensure the data transferred is confidential?

• A. authpriv
• B. SHA
• C. MD5
• D. Authentication passphrase

Answer: A

NEW QUESTION 17
Which of the following would a company place at the edge of its network if it wants to view and control which Internet applications are being used?

• A. VPN concentrator
• B. NGFW
• C. IDS/IPS
• D. Proxy server

Answer: B

NEW QUESTION 18
A system administrator receives report from users of odd behavior in regard to recently installed server. While reviewing the server network configuration, the systems administrator does both a forward and a reverse DNS lookup on the host, along with the network adapter configuration.

Which of the following is the problem identified in the output above?

• A. There is no reverse DNS entry for this host.
• B. The server IP address is incorrectly configured.
• C. The DNS lookup entry is incorrectly configured.
• D. The reverse DNS entry is pointing to a different host.

Answer: C