Ucertify has program hotline for you in order to consult us if you have just about any question. Our objective is always to make our customers satisfied as well as successful. We all are consequently proud of the pass rate that we promise youll get the Microsoft 70-411 certification without any difficulty. As well as you can get 100% income back from the paying fees.
2021 Mar 70-411 testing engine
Q121. HOTSPOT
Your network contains an Active Directory domain named contoso.com.
All DNS servers host a DNS zone named adatum.com. The adatum.com zone is not Active Directory-integrated.
An administrator modifies the start of authority (SOA) record for the adatum.com zone.
After the modification, you discover that when you add or modify DNS records in the
adatum.com zone, the changes are not transferred to the DNS servers that host secondary
copies of the adatum.com zone.
You need to ensure that the records are transferred to all the copies of the adatum.com
zone.
What should you modify in the SOA record for the adatum.com zone? To answer, select the appropriate setting in the answer area.
Answer:
Q122. You have a failover cluster that contains five nodes. All of the nodes run Windows Server 2012 R2. All of the nodes have BitLocker Drive Encryption (BitLocker) enabled.
You enable BitLocker on a Cluster Shared Volume (CSV).
You need to ensure that all of the cluster nodes can access the CSV.
Which cmdlet should you run next?
A. Unblock-Tpm
B. Add-BitLockerKeyProtector
C. Remove-BitLockerKeyProtector
D. Enable BitLockerAutoUnlock
Answer: B
Explanation:
4. Add an Active Directory Security Identifier (SID) to the CSV disk using the Cluster Name Object (CNO) The Active Directory protector is a domain security identifier (SID) based protector for protecting clustered volumes held within the Active Directory infrastructure. It can be bound to a user account, machine account or group. When an unlock request is made for a protected volume, the BitLocker service interrupts the request and uses the BitLocker protect/unprotect APIs to unlock or deny the request. For the cluster service to selfmanage BitLocker enabled disk volumes, an administrator must add the Cluster Name Object (CNO), which is the Active Directory identity associated with the Cluster Network name, as a BitLocker protector to the target disk volumes. Add-BitLockerKeyProtector <drive letter or CSV mount point> -ADAccountOrGroupProtector – ADAccountOrGroup $cno
Q123. Your network contains an Active Directory domain named contoso.com. The domain
contains a server named Server1 that runs Windows Server 2012 R2.
You enable and configure Routing and Remote Access (RRAS) on Server1.
You create a user account named User1.
You need to ensure that User1 can establish VPN connections to Server1.
What should you do?
A. Modify the members of the Remote Management Users group.
B. Add a RADIUS client.
C. Modify the Dial-in setting of User1.
D. Create a connection request policy.
Answer: C
Explanation:
Access permission is also granted or denied based on the dial-in properties of each user account.
http://technet.microsoft.com/en-us/library/cc772123.aspx
Q124. Your network contains an Active Directory domain named contoso.com. The domain contains five servers. The servers are configured as shown in the following table.
All desktop computers in contoso.com run Windows 8 and are configured to use BitLocker Drive Encryption (BitLocker) on all local disk drives.
You need to deploy the Network Unlock feature. The solution must minimize the number of features and server roles installed on the network.
To which server should you deploy the feature?
A. Server1
B. Server2
C. Server3
D. Server4
E. Server5
Answer: E
Explanation:
The BitLocker Network Unlock feature will install the WDS role if it is not already installed. If you want to install it separately before you install BitLocker Network Unlock you can use Server Manager or Windows PowerShell. To install the role using Server Manager, select the Windows Deployment Services role in Server Manager.
Q125. HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 has the following BitLocker Drive Encryption (BitLocker) settings:
You need to ensure that drive D will unlock automatically when Server1 restarts. What command should you run? To answer, select the appropriate options in the answer area.
Answer:
Up to the immediate present 70-411 free question:
Q126. You have a file server named Server1 that runs Windows Server 2012 R2. Server1 has the File Server Resource Manager role service installed.
Files created by users in the human resources department are assigned the Department classification property automatically.
You are configuring a file management task named Task1 to remove user files that have not been accessed for 60 days or more.
You need to ensure that Task1 only removes files that have a Department classification property of human resources. The solution must minimize administrative effort.
What should you configure on Task1?
A. Configure a file screen
B. Create a condition
C. Create a classification rule
D. Create a custom action
Answer: B
Explanation:
Create a File Expiration Task The following procedure guides you through the process of creating a file management task for expiring files. File expiration tasks are used to automatically move all files that match certain criteria to a specified expiration directory, where an administrator can then back those files up and delete them. Property conditions. Click Add to create a new condition based on the file’s classification. This will open the Property Condition dialog box, which allows you to select a property, an operator to perform on the property, and the value to compare the property against. After clicking OK, you can then create additional conditions, or edit or remove an existing condition.
Q127. Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. Cluster1 hosts 10 virtual machines. All of the virtual machines run Windows Server 2012 R2 and are members of the domain.
You need to ensure that the first time a service named Service1 fails on a virtual machine, the virtual machine is moved to a different node.
You configure Service1 to be monitored from Failover Cluster Manager.
What should you configure on the virtual machine?
A. From the General settings, modify the Startup type.
B. From the General settings, modify the Service status.
C. From the Recovery settings of Service1, set the First failure recovery action to Take No Action.
D. From the Recovery settings of Service1, set the First failure recovery action to Restart the Service.
Answer: C
Explanation:
Configure the virtual machine to take no action through Hyper-V if the physical computer shuts down by modifying the Automatic Stop Action setting to None. Virtual machine state must be managed through the Failover Clustering feature.
Virtual machine application monitoring and management
In clusters running Windows Server 2012, administrators can monitor services on clustered virtual machines that are also running Windows Server 2012. This functionality extends the high-level monitoring of virtual machines that is implemented in Windows Server 2008 R2 failover clusters. If a monitored service in a virtual machine fails, the service can be restarted, or the clustered virtual machine can be restarted or moved to another node (depending on service restart settings and cluster failover settings). This feature increases the uptime of high availability services that are running on virtual machines within a failover cluster.
Windows Server 2012 Failover Cluster introduces a new capability for Hyper-V virtual machines (VMs), which is a basic monitoring of a service within the VM which causes the VM to be rebooted should the monitored service fail three times. For this feature to work the following must be configured:
. Both the Hyper-V servers must be Windows Server 2012 and the guest OS
running in the VM must be Windows Server 2012.
. The host and guest OSs are in the same or at least trusting domains.
. The Failover Cluster administrator must be a member of the local administrator's group inside the VM. Ensure the service being monitored is set to Take No Action (see screen shot below) within the guest VM for Subsequent failures (which is used after the first and second failures) and is set via the Recovery tab of the service properties within the Services application (services. msc).
Within the guest VM, ensure the Virtual Machine Monitoring firewall exception is enabled for the Domain network by using the Windows Firewall with Advanced Security application or by using the Windows PowerShell command below: Set-NetFirewallRule -DisplayGroup "Virtual Machine Monitoring" -Enabled True.
After the above is true, enabling the monitoring is a simple process: Launch the Failover Cluster Manager tool. Navigate to the cluster - Roles. Right click on the virtual machine role you wish to enable monitoring for and under More Actions select Configure Monitoring.
. The services running inside the VM will be gathered and check the box for the services that should be monitored and click OK.
You are done!
Monitoring can also be enabled using the Add-ClusterVMMonitoredItemcmdlet and -VirtualMachine, with the -Service parameters, as the example below shows: PS C:Windowssystem32> Add-ClusterVMMonitoredItem -VirtualMachine savdaltst01 -Service spooler
References:
http: //sportstoday. us/technology/windows-server-2012---continuous-availability-%28part-4%29---failover-clustering-enhancements---virtual-machine-monitoring-. aspx
http: //windowsitpro. com/windows-server-2012/enable-windows-server-2012-failover-cluster-hyper-v-vm-monitoring
http: //technet. microsoft. com/en-us/library/cc742396. aspx
Q128. You have a server named Server 1.
You enable BitLocker Drive Encryption (BitLocker) on Server 1.
You need to change the password for the Trusted Platform Module (TPM) chip.
What should you run on Server1?
A. Manage-bde.exe
B. Set-TpmOwnerAuth
C. bdehdcfg.exe
D. tpmvscmgr.exe
Answer: B
Explanation:
The Set-TpmOwnerAuthcmdlet changes the current owner authorization value of the Trusted Platform Module (TPM) to a new value. You can specify the current owner authorization value or specify a file that contains the current owner authorization value. If you do not specify an owner authorization value, the cmdlet attempts to read the value from the registry.
Use the ConvertTo-TpmOwnerAuthcmdlet to create an owner authorization value. You can specify a new owner authorization value or specify a file that contains the new value.
Q129. Your network contains a single Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that hosts the primary DNS zone for contoso.com.
All servers dynamically register their host names.
You install three new Web servers that host identical copies of your company's intranet website. The servers are configured as shown in the following table.
You need to use DNS records to load balance name resolution queries for intranet.contoso.com between the three Web servers.
What is the minimum number of DNS records that you should create manually?
A. 1
B. 3
C. 4
D. 6
Answer: B
Explanation:
To create DNS Host (A) Records for all internal pool servers
1. Click Stabrt, click All Programs, click Administrative Tools, and then click DNS.
2. In DNS Manager, click the DNS Server that manages your records to expand it.
3. Click Forward Lookup Zones to expand it.
4. Right-click the DNS domain that you need to add records to, and then click New Host (A or AAAA).
5. In the Name box, type the name of the host record (the domain name will be automatically appended).
6. In the IP Address box, type the IP address of the individual Front End Server and then select Create associated pointer (PTR) record or Allow any authenticated user to update DNS records with the same owner name, if applicable.
7. Continue creating records for all member Front End Servers that will participate in DNS Load Balancing.
For example, if you had a pool named pool1.contoso.com and three Front End Servers, you would create the following DNS entries:
Reference:
http: //technet. microsoft. com/en-us/library/cc772506. aspx
http: //technet. microsoft. com/en-us/library/gg398251. aspx
Q130. You have a server named Server1 that runs Windows Server 2012 R2.
You need to configure Server1 to create an entry in an event log when the processor usage exceeds 60 percent.
Which type of data collector should you create?
A. An event trace data collector
B. A performance counter alert
C. A performance counter data collector
D. A configuration data collector
Answer: B
Explanation:
Performance alerts notify you when a specified performance counter exceeds your configured threshold by logging an event to the event log. But rather than notifying you immediately when the counter exceeds the threshold, you can configure a time period over which the counter needs to exceed the threshold, to avoid unnecessary alerts.