Cause all that matters here is passing the Microsoft 70 410 study guide pdf exam. Cause all that you need is a high score of mcsa 70 410 Installing and Configuring Windows Server 2012 exam. The only one thing you need to do is downloading Passleader 70 410 exam questions pdf exam study guides now. We will not let you down with our money-back guarantee.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-410 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-410-exam-dumps.html
P.S. High value 70-410 samples are available on Google Drive, GET MORE: https://drive.google.com/open?id=1gKqa_vO9OeNyYEjdDpkvCkiJIJhS7seE
New Microsoft 70-410 Exam Dumps Collection (Question 10 - Question 19)
Q1. Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. HVServer1 hosts two virtual machines named Server1 and Server2. Both virtual machines connect to a virtual switch named Switch1.
On Server2, you install a network monitoring application named App1.
You need to capture all of the inbound and outbound traffic to Server1 by using App1. Which two commands should you run from Windows PowerShell? (Each correct answer
presents part of the solution. Choose two.)
A. Get-VM u201cServer2 | Set-VMNetworkAdapter -IovWeight 1
B. Get-VM u201cServer1 | Set-VMNetworkAdapter -Allow/Teaming On
C. Get-VM u201cServer1 | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM u201cServer2 | Set-VMNetworkAdapter -PortMirroring Destination
E. Get-VM u201cServer1 | Set-VMNetworkAdapter -IovWeight 0
F. Get-VM u201cServer2 | Set-VMNetworkAdapter-AllowTeaming On
Answer: C,D
Q2. Your network contains an Active Directory forest named adatum.com. The forest contains a
child domain named asia.adatum.com. The asia.adatum.com child domain contains a server named DHCP1 that runs Windows Server 2012 R2.
You install the DHCP Server server role on DHCP1.
You have access to the administrative accounts shown in the following table.
You need to authorize DHCP1. Which user account should you use?
A. Admin1
B. Admin2
C. Admin3
D. Admin4
Answer: B
Q3. Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown in the following table. Server3 is configured to obtain an IP address automatically.
You need to ensure that Server3 only receives an IP address from Server1. The IP address must always be the same.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Create an exclusion on Server1.
B. Create a filter on Server1.
C. Create a reservation on Server2
D. Create a reservation on Server1
E. Create a filter on Server2.
Answer: D,E
Q4. Your network contains an Active Directory domain named contoso.com.
The domain contains 20 computer accounts in an organizational unit (OU) named OU1. A user account named User1 is in an OU named OU2.
You are configuring a Group Policy object (GPO) named GPO1.
You need to assign User1 the Back up files and directories user right to all of the computer accounts in OU1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From User Configuration in GPO1, modify the security settings.
B. Link GPO1 to OU1.
C. From Computer Configuration in GPO1, modify the security settings.
D. Modify the Delegation settings of GPO1.
E. Link GPO1 to OU2.
Answer: B,C
Q5. You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
Contoso.com has a server, named ENSUREPASS-SR07, which has two physical disks
installed. The C: drive hosts the boot partition, while the D: drive is not being used. Both disks are online.
You have received instructions to create a virtual machine on ENSUREPASS-SR07. Subsequent to creating the virtual machine, you have to connect the D: drive to the virtual machine.
Which of the following is TRUE with regards to connecting a physical disk to a virtual machine?
A. The physical disk should not be online.
B. The physical disk should be uninstalled and re-installed.
C. The physical disk should be configured as a striped disk.
D. The physical disk should be configured as a mirrored disk.
Answer: A
Explanation:
Your virtual machines can also be connected to physical hard disks on the virtualization server virtual hard disks. (This is sometimes referred to as having a u201cpass-throughu201d disk connected to a virtual machine.)
The physical hard disk that you connect to a virtual machine can also be a network- attached disk, like a logical unit number (LUN) in a storage area network (SAN). A common example is an iSCSI LUN that has been mapped to the virtualization server by using Microsoft iSCSI Initiator. Because the virtualization server sees network-attached storage as local disks, the iSCSI LUN can be connected to a virtual machine.
The most important limitation about having a physical hard disk connected to a virtual machine is that it cannot be connected to the virtualization server or to other virtual machines at the same time. The virtual machine must have exclusive access to the physical hard disk.
Pass-through Disk Configuration Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-Vserver perspective.
Q6. You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed.
You are running a training exercise for junior administrators. You are currently discussing the use of Non-Uniform Memory Architecture (NUMA).
Which of the following is TRUE with regards to Non-Uniform Memory Architecture (NUMA)? (Choose two.)
A. It is a computer architecture used in multiprocessor systems.
B. It is a computer architecture used in single processor systems.
C. It allows a processor to access local memory faster than it can access remote memory.
D. It allows a processor to access remote memory faster than it can access local memory.
Answer: A,C
Explanation:
NUMA is a hardware design feature that divides CPUs and memory in a physical server into NUMA nodes.
You get the best performance when a process uses memory and CPU from within the same NUMA node.
de is full, then itu2021ll get memory from
When a process requires more memory, but the current NUMA no another NUMA node and that comes at a performance cost to that process, and possibly all other processes
on that physical server. And thatu2021s why virtualization engineers need to be aware of this. In Hyper-V we have Dynamic Memory.
Non-Uniform Memory Access or Non-Uniform Memory Architecture (NUMA) is a computer memory design used in multiprocessors, where the memory access time depends on the memory location relative to a processor. Under ccNUMA, a processor can access its own local memory faster than non-local memory, that is, memory local to another processor or memory shared between processors. NUMA architectures logically follow in scaling from symmetric multiprocessing (SMP) architectures.
Q7. Your network contains an Active Directory domain named contoso.com. The domain contains two servers named CONT1 and CONT2. Both servers run Windows Server 2012 R2.
CONT1 has a shared printer named Printer1. CONT2 connects to Printer1 on CONT1. When you attempt to remove Printer1 from CONT2, you receive the error message shown
in the exhibit. (Click the Exhibit button.)
You successfully delete the other printers installed on CONT2.
You need to identify what prevents you from deleting Printer1 on CONT2. What should you identify?
A. Printer1 is deployed as part of a mandatory profile.
B. Printer1 is deployed by using a Group Policy object (GPO).
C. Your user account is not a member of the Print Operators group on CONT2.
D. Your user account is not a member of the Print Operators group on CONT1.
Answer: B
Q8. Your companyu2021s security policy states that all of the servers deployed to a branch office must not have the graphical user interface (GUI) installed. In a branch office, a support technician installs a server with a GUI installation of Windows Server 2012 on a new server, and then configures the server as a DHCP server.
You need to ensure that the new server meets the security policy. You want to achieve this goal by using the minimum amount of Administrative effort.
What should you do?
A. Reinstall Windows Server 2012 on the server.
B. From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience.
C. From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE.
D. From Server Manager, uninstall the User Interfaces and Infrastructure feature.
Answer: D
Q9. Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. New-StorageSubsytemVirtualDisk
B. File Server Resource Manager (FSRM)
C. Server Manager
D. Computer Management
Answer: A
Explanation:
For other questions to create a VHD (file) you can use computer management.
- Share and storage management (2008 only)
- New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
- Server Manager (you would use this to create virtual disks, not virtual hard disks)
Q10. Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs Windows 8. DC1 is configured as a DHCP server as shown in the exhibit. Computer1 is configured to obtain an IP address automatically.
You need to ensure that Computer1 can receive an IP address from DC1. What should you do?
A. Disable the Allow filters.
B. Disable the Deny filters
C. Activate Scope [10.1.1.0] Contoso.com.
D. Authorize dc1.contoso.com.
Answer: D
Explanation:
A red down arrow indicates an unauthorized DHCP server. A DHCP server that is a domain controller or a member of an Active Directory domain queries Active Directory for the list of authorized servers (identified by IP address). If its own IP address is not in the list of authorized DHCP servers, the DHCP Server service does not complete its startup sequence and automatically shuts down.
100% Most recent Microsoft 70-410 Questions & Answers shared by Surepassexam, Get HERE: https://www.surepassexam.com/70-410-exam-dumps.html (New 479 Q&As)