All the crucial guides are from here to help you prepare for the Microsoft 70-410 exam. We have designed our Study guides, Q&As together with Detailed Explanations, Comprehensive Preparation labs to ensure you pass your examination on the initial try. Your Pdf files are printable as well as portable. You can carry these with you and review the Microsoft exam questions as well as answers anytime and wherever. If you dont pass the actual Microsoft Microsoft exam, Exambible.com will certainly offer you full refund or even another no cost product as outlined by your will need. You should make contact with our buyer support as well as claim the exam dump youd just like. If you claim the actual full money , you should email us the failed transcript. Our workers will certainly remit you soon after making certain your details.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-410 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-410-exam-dumps.html
2021 Apr 70-410 test engine
Q171. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
You create an external virtual switch named Switch1. Switch1 has the following configurations:
Connection type: External network
Single-root I/O virtualization (SR-IOV): Enabled
Ten virtual machines connect to Switch1.
You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines.
What should you do?
A. Remove Switch1 and recreate Switch1 as an internal network.
B. Change the Connection type of Switch1 to Private network.
C. Change the Connection type of Switch1 to Internal network.
D. Remove Switch1 and recreate Switch1 as a private network.
Answer: D
Explanation:
You cannot change the type of vswitch from external to private when SR-IOV is enabled at vswitch creation ->you need to recreate the vswitch.
Q172. HOTSPOT - (Topic 3)
Your network contains an Active Directory domain named contoso.com.
Technicians use Windows Deployment Services (WDS) to deploy Windows Server 2012 R2.
The network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
You need to ensure that you can use WDS to deploy Windows Server 2012 R2 to a virtual machine named VM1.
Which settings should you configure?
To answer, select the appropriate settings in the answer area.
Answer:
Q173. - (Topic 3)
You have a server named Server1 that has the Print and Document Services server role installed.
You need to provide users with the ability to manage print jobs on Server1 by using a web browser.
What should you do?
A. Start the Printer Extensions and Notifications service and set the service to start automatically.
B. Install the LPD Service role service.
C. Start the Computer Browser service and set the service to start automatically.
D. Install the Internet Printing role service.
Answer: D
Explanation:
References: Internet printing makes it possible for computers running Windows Server 2008 to use printers located anywhere in the world by sending print jobs using Hypertext Transfer Protocol (HTTP). http://technet.microsoft.com/en-us/library/cc731368(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc731857.aspx
Q174. - (Topic 3)
Your network contains an Active Directory domain named contoso.com. All user accounts are in an organizational unit (OU) named Employees.
You create a Group Policy object (GPO) named GP1. You link GP1 to the Employees OU.
You need to ensure that GP1 does not apply to the members of a group named Managers.
What should you configure?
A. The Security settings of Employees
B. The WMI filter for GP1
C. The Block Inheritance option for Employees
D. The Security settings of GP1
Answer: D
Explanation:
A. Wrong Group
B. Windows Management Instrumentation (WMI) filters allow you to dynamically determine
the scope of Group Policy objects (GPOs) based on attributes of the target computer.
C. Blocking inheritance prevents Group Policy objects (GPOs) that are linked to higher
sites, domains, or organizational units from being automatically inherited by the child-level.
D. Set Managers to – Members of this security group are exempt from this Group Policy
object.
Security settings.
You use the Security Settings extension to set security options for computers and users
within the scope of a Group Policy object. You can define local computer, domain, and network security settings. Figure below shows an example of the security settings that allow everyone to be affected by this GPO except the members of the Management group, who were explicitly denied permission to the GPO by setting the Apply Group Policy ACE to Deny. Note that if a member of the Management group were also a member of a group that had an explicit Allow setting for the Apply Group Policy ACE, the Deny would take precedence and the GPO would not affect the user.
Q175. - (Topic 1)
Your network contains an Active Directory forest named contoso.com. All domain controllers currently run Windows Server 2008 R2.
You plan to install a new domain controller named DC4 that runs Windows Server 2012 R2.
The new domain controller will have the following configurations:
Schema master
Global catalog server
DNS Server server role
Active Directory Certificate Services server role
You need to identify which configurations cannot be fulfilled by using the Active Directory Domain Services Configuration Wizard.
Which two configurations should you identify? (Each correct answer presents part of the solution. Choose two.)
A. Install the DNS Server role.
B. Enable the global catalog server.
C. Install the Active Directory Certificate Services role.
D. Transfer the schema master.
Answer: C,D
Explanation:
Installation Wizard will automatically install DNS and allows for the option to set it as a global catalog server. ADCS and schema must be done separately.
Down to date 70-410 test preparation:
Q176. - (Topic 3)
A company’s server virtualization team needs to provision a series of Hyper-V workloads to use existing network storage arrays. The team has chosen to use Fibre Channel ports within the guest operating systems.
Which of the following Windows Server versions can be used as guest operating systems when using Hyper-V Fibre Channel ports?
A. 2003 R2
B. 2008
C. 2003
D. 2012
Answer: B,D
Explanation:
Windows Server 2008, 2008 R2, and 2012 R2 can be guest operating systems when using
Hyper-V Fibre Channel host bus adaptors (HBAs). Updated HBA drivers are needed along
with NPIV-enabled (N_Port ID Virtualization) SANs.
Quick Tip: Virtual Fibre Channel logical units cannot be used as boot media.
Q177. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a domain controller, named ENSUREPASS-DC01, which has Windows Server 2012 R2 installed. Another Contoso.com domain controller, named ENSUREPASS-DC02, has Windows Server 2008 R2 installed.
You have deployed a server, named ENSUREPASS-SR15, on Contoso.com’s perimeter network. ENSUREPASSSR15 is running a Server Core Installation of Windows Server 2012 R2.
You have been instructed to make sure that ENSUREPASS-SR15 is part of the Contoso.com domain.
Which of the following actions should you take?
A. You should consider making use of Set-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
B. You should consider making use of Get-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
C. You should consider making use of Test-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
D. You should consider making use of Add-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
Answer: D
Explanation:
Add-Computer – Add the local computer to a domain or workgroup.
Q178. - (Topic 3)
Your company has an Active Directory domain. You log on to the domain controller. The Active Directory Schema snap-in is not available in the Microsoft Management Console (MMC).
You need to access the Active Directory Schema snap-in. What should you do?
A. Register Schmmgmt.dll.
B. Log off and log on again by using an account that is a member of the Schema Admins group.
C. Use the Ntdsutil.exe command to connect to the schema master operations master and open the schema for writing.
D. Add the Active Directory Lightweight Directory Services (AD/LDS) role to the domain controller by using Server Manager.
Answer: A
Explanation:
Install the Active Directory Schema Snap-In You can use this procedure to first register the dynamic-link library (DLL) that is required for the Active Directory Schema snap-in. You can then add the snap-in to Microsoft Management Console (MMC).
To install the Active Directory Schema snap-in:
1. To open an elevated command prompt, click Start, type command prompt and then right-click Command Prompt when it appears in the Start menu. Next, click Run as administrator
and then click OK.
To open an elevated command prompt in Windows Server 2012 R2, click Start, type cmd,
right-click cmd and then click Run as administrator.
2. Type the following command, and then press ENTER: regsvr32 schmmgmt.dll
3. Click Start, click Run, type mmc and then click OK.
4. On the File menu, click Add/Remove Snap-in.
5. Under Available snap-ins, click Active Directory Schema, click Add and then click OK.
6. To save this console, on the File menu, click Save.
7. In the Save As dialog box, do one of the following:
* To place the snap-in in the Administrative Tools folder, in File name, type a name for the snap-in, and then click Save.
* To save the snap-in to a location other than the Administrative Tools folder, in Save in , navigate to a location for the snap-in. In File name, type a name for the snap-in, and then click Save.
Q179. - (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that has the DNS Server server role installed. Server1 hosts a primary zone for contoso.com.
The domain contains a member server named Server2 that is configured to use Server1 as its primary DNS server.
From Server2, you run nslookup.exe as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you run Nslookup, the correct name of the default server is displayed.
What should you do?
A. On Server1, create a reverse lookup zone.
B. On Server1, modify the Security settings of the contoso.com zone.
C. From Advanced TCP/IP Settings on Server1, add contoso.com to the DNS suffix list.
D. From Advanced TCP/IP Settings on Server2, add contoso.com to the DNS suffix list.
Answer: A
Explanation:
Make sure that a reverse lookup zone that is authoritative for the PTR resource record
exists.
PTR records contain the information that is required for the server to perform reverse name
lookups.
References:
http://technet.microsoft.com/en-us/library/cc961417.aspx
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4:
Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6
addressing, p.246
Q180. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 installed.
You have been instructed to modify the name of the local Administrator account on all Contoso.com workstations. You want to achieve this using as little administrative effort as possible.
Which of the following actions should you take?
A. You should consider configuring the Security Options settings via the Group Policy Management Console (GPMC).
B. You should consider navigating to Local Users and Groups via Computer
C. You should consider configuring the replication settings.
D. You should consider navigating to Local Users and Groups via Computer Management on each workstation.
Answer: A
Explanation:
Rename administrator account policy setting determines whether a different account name is associated with the security identifier (SID) for the Administrator account. Because the Administrator account exists on all Windows server versions, renaming the account makes it slightly more difficult for attackers to guess this user name and password combination. By default, the built-in Administrator account cannot be locked out no matter how many times a malicious user might use a bad password. This makes the Administrator account a popular target for brute-force password-guessing attacks. The value of this countermeasure is lessened because this account has a well-known SID and there are non-Microsoft tools that allow you to initiate a brute-force attack over the network by specifying the SID rather than the account name. This means that even if you have renamed the Administrator account, a malicious user could start a brute-force attack by using the SID. Rename the Administrator account by specifying a value for the Accounts: Rename administrator account policy setting. Location: GPO_nameComputer ConfigurationWindows SettingsSecurity SettingsLocal PoliciesSecurity Options