Free of 70-410 latest exam materials and keys for Microsoft certification for customers, Real Success Guaranteed with Updated 70-410 pdf dumps vce Materials. 100% PASS Installing and Configuring Windows Server 2012 exam Today!
2021 Mar 70-410 exam answers
Q21. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Server2 establishes an IPSec connection to Server1.
You need to view which authentication method was used to establish the initial IPSec connection.
What should you do?
A. From Windows Firewall with Advanced Security, view the quick mode security association.
B. From Event Viewer, search the Application Log for events that have an ID of 1704.
C. From Event Viewer, search the Security Log for events that have an ID of 4672.
D. From Windows Firewall with Advanced Security, view the main mode security association.
Answer: D
Explanation:
Main mode negotiation establishes a secure channel between two computers by determining a set of cryptographic protection suites, exchanging keying material to establish a shared secret key, and authenticating computer and user identities. A security association (SA) is the information maintained about that secure channel on the local computer so that it can use the information for future network traffic to the remote computer. You can monitor main mode SAs for information like which peers are currently connected to this computer and which protection suite was used to form the SA. To get to this view In the Windows Firewall with Advanced Security MMC snap-in, expand Monitoring, expand Security Associations, and then click Main Mode. The following information is available in the table view of all main mode SAs. To see the information for a single main mode SA, double-click the SA in the list. Main mode SA information You can add, remove, reorder, and sort by these columns in the Results pane: Local Address: The local computer IP address. Remote Address: The remote computer or peer IP address. 1st Authentication Method: The authentication method used to create the SA. 1st Authentication Local ID: The authenticated identity of the local computer used in first authentication. 1st Authentication Remote ID: The authenticated identity of the remote computer used in first authentication.
2nd Authentication Method: The authentication method used in the SA.
2nd Authentication Local ID: The authenticated identity of the local computer used in
second authentication.
2nd Authentication Remote ID: The authenticated identity of the remote computer used in
second authentication.
Encryption: The encryption method used by the SA to secure quick mode key exchanges.
Integrity: The data integrity method used by the SA to secure quick mode key exchanges.
Key Exchange: The Diffie-Hellman group used to create the main mode SA.
: http://technet.microsoft.com/en-us/library/dd448497(v=ws.10).aspx
Q22. - (Topic 3)
Your network contains an active directory domain named Contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Hyper-V server role installed. You have a virtual machine named VM1. VM1 has a snapshot. You need to modify the Snapshot File Location of VM1.
What should you do first?
A. Copy the snapshot file
B. Pause VM1
C. Shut down VM1
D. Delete the snapshot
Answer: D
Explanation:
Snapshot data files are stored as .avhd files. Taking multiple snapshots can quickly consume storage space. In the first release version of Hyper-V (KB950050) and in Hyper-V in Windows Server 2008 Service Pack 2, snapshot, snapshot data files usually are located in the same folder as the virtual machine by default. In Hyper-V in Windows Server 2008 R2, the files usually are located in the same folder as the virtual hard disk. The following exceptions affect the location of the snapshot data files: If the virtual machine was imported with snapshots, they are stored in their own folder. If the virtual machine has no snapshots and you configure the virtual machine snapshot setting, all snapshots you take afterwards will be stored in the folder you specify. Caution Do not delete .avhd files directly from the storage location. Instead, use Hyper-V Manager to select the virtual machine, and then delete the snapshots from the snapshot tree. Do not expand a virtual hard disk when it is used in a virtual machine that has snapshots. Doing so will make the snapshots unusable. http://technet.microsoft.com/en-us/library/dd560637(v=ws.10).aspx
Q23. - (Topic 2)
Your network contains an Active Directory domain named contoso.com. The network contains 500 client computers that run Windows 8. All of the client computers connect to the Internet by using a web proxy.
You deploy a server named Server1 that runs Windows Server 2012 R2. Server1 has the DNS Server server role installed.
You configure all of the client computers to use Server1 as their primary DNS server.
You need to prevent Server1 from attempting to resolve Internet host names for the client computers.
What should you do on Server1?
A. Create a primary zone named “root”.
B. Create a primary zone named "GlobalNames".
C. Create a forwarder that points to 169.254.0.1.
D. Create a primary zone named “.”.
Answer: A
Q24. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.
A server named, ENSUREPASS-SR13, has a Server Core Installation of Windows Server 2012 installed.
You are instructed to convert ENSUREPASS-SR13’s installation to a Server with GUI installation.
You want to use a Windows PowerShell cmdlet that uses Windows Update as a source.
Which of the following actions should you take?
A. You should consider making use of the Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell - Restart cmdlet.
B. You should consider making use of the Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell - Restart -Source c:mountdirwindowswinsxs cmdlet.
C. You should consider making use of the Uninstall-WindowsFeature Server-Gui-Shell–Remove cmdlet.
D. You should consider making use of the Set-ExecutionPolicy cmdlet.
Answer: B
Explanation:
The default installation source is Windows Update (provided that the server is connected to
the internet).
The Full GUI Server Interface provides you with the full GUI of Windows Server 2012 R2.
PowerShell Command: Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell.
When it’s done, we will need to restart our server by using the Shutdown command:
shutdown -r -t 0
Q25. - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You promote Server1 to a domain controller.
You need to view the service location (SRV) records that Server1 registers in DNS.
What should you do on Server1?
A. Open the Srv.sys file.
B. Open the Netlogon.dns file.
C. Run ipconfig /displaydns.
D. Run Get-DnsServerDiagnostics.
Answer: B
Explanation:
A. Timestamp server driver
B. Netlogon service creates a log file that contains all the locator resource records stored in netlogon.
C. used to display current resolver cache content
D. Gets DNS event logging details
Far out 70-410 practice test:
Q26. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has following storage spaces:
....
Data
Users
Backups
Primordial
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk.
Which storage space contains the new disk?
A. Primordial
B. Data
C. Users
D. Backups
Answer: A
Explanation:
All storage that meets acceptable criteria for Storage Spaces will be placed in the Primordial Pool. This can be considered the default pool for devices from which any other pools will be created. Notice that there are no other virtual disks or pools at this point. The Primordial Pool will only consist of physical storage devices that do not belong to any other pools.
Q27. HOTSPOT - (Topic 2)
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 hosts 50 virtual machines.
You need to create a script to list all of the virtual machines that have checkpoints and support Secure Boot.
What should you do? To answer, select the appropriate options in the answer area.
Answer:
Q28. - (Topic 3)
You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers in the ABC.com domain, including domain controllers, have Windows Server 2012 R2 installed.
ABC.com’s user accounts are located in an organizational unit (OU), named ABCStaff. ABC.com’s managers belong to a group, named ABCManagers.
You have been instructed to create a new Group Policy object (GPO) that should be linked to the ABCStaffOU, but not affect ABC.com’s managers.
Which of the following actions should you take?
A. You should consider removing the user accounts of the managers from the ABCStaff OU.
B. You should consider configuring the new GPO’s WMI filter.
C. You should consider adding the user accounts of ABC.com’s managers to the Admins group.
D. You should consider adding the user accounts of ABC.com’s managers to the local Administrators group.
Answer: B
Q29. DRAG DROP - (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2.
You need to perform the following storage configuration tasks on Server1:
Bring a disk named Disk1 online.
Defragment a volume named Volume1.
Remove a disk named Disk2 from a storage pool named Pool1.
Which cmdlet should you use to perform each task?
To answer, drag the appropriate cmdlets to the correct tasks. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q30. - (Topic 3)
What should you do for server core so it can be managed from another server 2012 R2?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 7
H. 8
I. 9
J. 10
K. 11
L. 12
M. 13
N. 14
O. 15
Answer: A
Explanation:
You should join the server to the domain first. You can add workgroup servers to Server Manager on a domain joined server, however, you must first add the workgroup computer to the Trusted Hosts list using "Set-Item wsman:localhostClientTrustedHostsWorkgroupServerName -Concatenate -Force"