Exam Code: 70-410 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Installing and Configuring Windows Server 2012
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass 70-410 Exam.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-410 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-410-exam-dumps.html
2021 Mar 70-410 testing engine
Q91. - (Topic 3)
You have a file server named Server1 that runs Windows Server 2012 R2. Server1 has following hardware configurations:
-16GB of RAM
-A single quad-core CPU
-Three network teams that have two network adapters each
You add additional CPUs and RAM to Server 1.
You repurpose Server1 as a virtualization host. You install the Hyper-V server role on Server1. You need to create four external virtual switches in Hyper-V. Which cmdlet should you run first?
A. Set-NetAdapter.
B. Add-Net1.bfoTeamNic
C. Add-VMNetworkAdapter
D. Remove-NetLbfoTeam
Answer: D
Q92. - (Topic 3)
You have two servers named Server1 and Server2. Both servers run Windows Server 2012 R2. The servers are configured as shown in the following table.
The routing table for Server1 is shown in the Routing Table exhibit. (Click the Exhibit button.)
From Server1, you attempt to ping Server2, but you receive an error message as shown in the Error exhibit. (Click the Exhibit button.)
You need to ensure that you can successfully ping Server2 from Server1. What should you do on Server1?
A. Disable Windows Firewall.
B. Modify the subnet mask.
C. Modify the DNS settings.
D. Modify the default gateway settings.
Answer: D
Explanation:
Route is used to view and modify the IP routing table. Route Print displays a list of current routes that the host knows. Default gateways are important to make IP routing work efficiently. TCP/IP hosts rely on default gateways for most of their communication needs with hosts on remote network segments. In this way, individual hosts are freed of the burden of having to maintain extensive and continuously updated knowledge about individual remote IP network segments. Only the router that acts as the default gateway needs to maintain this level of routing knowledge to reach other remote network segments in the larger inter network. In order for Host A on Network 1 to communicate with Host B on Network 2, Host A first checks its routing table to see if a specific route to Host B exists. If there is no specific route to Host B, Host A forwards its TCP/IP traffic for Host B to its own default gateway, IP Router 1.
The Default Gateway specifies the IP address of a router on the local subnet, which the system will use to access destinations on other networks. If the default gateway settings are not properly configured, then there can be no successful connection.
Reference:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 269
Q93. - (Topic 2)
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.
You need to configure a local Group Policy on Server1 that will apply only to non-administrators.
Which tool should you use?
A. Group Policy Object Editor
B. Group Policy Management
C. Group Policy Management Editor
D. Server Manager
Answer: A
Explanation:
Once you create a GPO, you can open it in the Group Policy Management Editor and
configure the GPO’s policies, specifically those settings that target the non-administrators.
In this scenario however, you still need to configure the Group Policy thus you would need
the GPO Editor.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10:
Implementing Group Policy, Lesson 1: Planning, implementing and managing group policy,
p. 475
Q94. - (Topic 2)
You have a server named Corel that has a Server Core Installation of Windows Server 2012 R2.
Corel has the Hyper-V server role installed. Corel has two network adapters from different third-party hardware vendors.
You need to configure network traffic failover to prevent connectivity loss if a network adapter fails.
What should you use?
A. New-NetSwitchTeam
B. Install-Feature
C. Add-NetSwitchTeamMember
D. Netsh.exe
Answer: A
Q95. - (Topic 2)
You have a server named Server1 that runs Windows Server 2012 R2. You add an additional disk to Server1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users can access the additional disk from drive C.
What should you do?
A. Convert Disk 0 to a dynamic disk and add a mirror.
B. Create a simple volume on Disk 1 and mount the volume to a folder.
C. Convert Disk 0 and Disk 1 to dynamic disks and extend a volume.
D. Convert Disk 1 to a dynamic disk and create a spanned volume.
Answer: B
Updated 70-410 exam cost:
Q96. - (Topic 1)
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.
The domain contains a user named User1 and three global security groups named Group1, Group2 and, Group3.
You need to add User1 to Group1, Group2, and Group3.
Which cmdlet should you run?
A. Add-AdPrincipalGroupMembership
B. Install-AddsDomainController
C. Install-WindowsFeature
D. Install-AddsDomain
E. Rename-AdObject
F. Set-AdAccountControl
G. Set-AdGroup
H. Set-User
Answer: A
Explanation:
The Add-ADPrincipalGroupMembershipcmdlet adds a user, group, service account, or computer as a new member to one or more Active Directory groups.
References:
http://technet.microsoft.com/en-us/library/ee617203.aspx http://technet.microsoft.com/en-us/library/hh974723.aspx
Q97. - (Topic 3)
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to enable Hyper-V Network Virtualization on Server1.
You need to install the Windows Network Visualization Filter Driver on Server1.
Which Windows PowerShell cmdlet should you run?
A. Set-NetVirtualizationGlobal
B. Enable-NetAdapterBinding
C. Add - WindowsFeature
D. Set-NetAdapterVmq
Answer: B
Explanation:
Hyper-V Network Virtrtualization runs multiple virtual networks on a physical network. And each virtual network operates as if it is running as a physical network. The Set-NetAdaptercmdlet sets the basic properties of a network adapter such as virtual LAN (VLAN) identifier (ID) and MAC address. Thus if you add the binding parameter to the command then you will be able to install the Windows Network Virtualization Filter Driver. Step one: Enable Windows Network Virtualization (WNV). This is a binding that is applied to the NIC that you External Virtual Switch is bound to. This can be a physical NIC, it can be an LBFO NIC team. Either way, it is the network adapter that your External Virtual Switch uses to exit the server. This also means that if you have multiple virtual networks or multiple interfaces that you can pick and choose and it is not some global setting. If you have one External Virtual Switch this is fairly easy: $vSwitch = Get-VMSwitch -SwitchType External # Check if Network Virtualization is bound # This could be done by checking for the binding and seeing if it is enabled ForEach-Object -InputObject $vSwitch { if ((Get-NetAdapterBinding -ComponentID "ms_netwnv" -InterfaceDescription $_.NetAdapterInterfaceDescription).Enabled -eq $false){ # Lets enable it Enable-NetAdapterBinding -InterfaceDescription $_.NetAdapterInterfaceDescription -ComponentID "ms_netwnv"}}
Q98. - (Topic 3)
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers in the Contoso.com domain, including domain controllers, have Windows Server 2012 installed.
Contoso.com has a server, named ENSUREPASS-SR07, which has four network adapters. Contoso.com has two SR07’s network adapters are connected to the one LAN, local area networks (LANs). Two of ENSUREPASS – while the other two are connected to the other LAN.
You are required to configure one of the network adapter pairs into a network adapter team.
Which of the following actions should you take?
A. You should consider accessing the Group Policy Management Console (GPMC) on ENSUREPASS-SR07.
B. You should consider accessing the TS Manager console on ENSUREPASS-SR07.
C. You should consider accessing the Server Manager console on ENSUREPASS-SR07.
D. You should consider accessing the Remote Desktop Gateway Manager console on ENSUREPASS-SR07.
Answer: C
Q99. - (Topic 1)
Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. The domain contains four domain controllers. The domain controllers are configured as shown in the following table.
All domain controllers are DNS servers.
You plan to deploy a new domain controller named DC5 in the contoso.com domain.
You need to identify which domain controller must be online to ensure that DC5 can be promoted successfully to a domain controller.
Which domain controller should you identify?
A. DC1
B. DC2
C. DC3
D. DC4
Answer: D
Explanation:
Relative ID (RID) Master: Allocates active and standby RID pools to replica domain controllers in the same domain. (corp.contoso.com). Must be online for newly promoted domain controllers to obtain a local RID pool that is required to advertise or when existing domain controllers have to update their current or standby RID pool allocation. The RID master is responsible for processing RID pool requests from all domain controllers in a particular domain. When a DC creates a security principal object such as a user or group, it attaches a unique Security ID (SID) to the object. This SID consists of a domain SID (the same for all SIDs created in a domain), and a relative ID (RID) that is unique for each security principal SID created in a domain. Each DC in a domain is allocated a pool of RIDs that it is allowed to assign to the security principals it creates. When a DC’s allocated RID pool falls below a threshold, that DC issues a request for additional RIDs to the domain’s RID master. The domain RID master responds to the request by retrieving RIDs from the domain’s unallocated RID pool and assigns them to the pool of the requesting DC At any one time, there can be only one domain controller acting as the RID master in the domain.
The Infrastructure Master – The purpose of this role is to ensure that cross-domain object references are correctly handled. For example, if you add a user from one domain to a security group from a different domain, the Infrastructure Master makes sure this is done properly. As you can guess however, if your Active Directory deployment has only a single domain, then the Infrastructure Master role does no work at all, and even in a multi-domain environment it is rarely used except when complex user administration tasks are performed, so the machine holding this role doesn’t need to have much horsepower at all.
Q100. - (Topic 3)
Your network contains an Active Directory domain named contoso.com.
You discover that when you join client computers to the domain manually, the computer accounts are created in the Computers container.
You need to ensure that new computer accounts are created automatically in an organizational unit (OU) named Corp.
Which tool should you use?
A. net.exe
B. redircmp.exe
C. regedit.exe
D. dsadd.exe
Answer: B
Explanation:
A. Used to stop/start protocols
B. Redirects the default container for newly created computers to a specified, target
organizational unit
C. Modify local registry entries
D. Adds specific types of objects to the directory
Redirects the default container for newly created computers to a specified, target
organizational unit (OU) so that newly created computer objects are created in the specific
target OU instead of in CN=Computers.
You must run the redircmp command from an elevated command prompt.
Redircmp.exe is located in the C:WindowsSystem32 folder.
You must be a member of the Domain Admins group or the Enterprise Admins group to
use this tool.