we provide Tested Microsoft 70-743 training which are the best for clearing 70-743 test, and to get certified by Microsoft Upgrading Your Skills to MCSA: Windows Server 2016. The 70-743 Questions & Answers covers all the knowledge points of the real 70-743 exam. Crack your Microsoft 70-743 Exam with latest dumps, guaranteed!

Free demo questions for Microsoft 70-743 Exam Dumps Below:

NEW QUESTION 1
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The hosts are nodes in failover cluster.
You have a virtual machine named VM1. VM1 connects to a virtual switch named vSwitch1. You discover that VM1 automatically live migrates when vSwitch temporarily disconnects. You need to prevent VM1 from being live migrated when vSwitch1 temporarily disconnects. What should you do?

  • A. From the network adapter setting of VM1, disable the Protected network setting.
  • B. From the network adapter setting of VM1, disable the Heartbeat integration service.
  • C. Run the Set-VMNetworkAdapter cmdlet and set IsmanagementOS to False.
  • D. Run the Set-VMNetworkAdapter cmdlet and set StormLimit to 0.

Answer: A

NEW QUESTION 2
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2016 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.
70-743 dumps exhibit
The virtual machines are configured as follows:
• Each virtual machine has one virtual network adapter.
• VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
• All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You create a new NLB cluster that contains VM3.
You need to ensure that VM2 can remain in the original cluster and be added to the new cluster. What should you do first?

  • A. Add a new virtual network adapter to VM2.
  • B. Install the Web Application Proxy server role on VM2 and VM3.
  • C. Change the cluster operation mode.
  • D. Modify the default port rul

Answer: A

Explanation:
References:
http://myitforum.com/myitforumwp/2012/08/16/how-to-configure-an-nlb-in-hyper-v-part-1/

NEW QUESTION 3
You have a Hyper-V host that runs Windows Server 2016.
You need to identify the amount of processor resources consumed by Hyper-V and virtual machines. Which counter should you use from Performance Monitor?

  • A. \Hyper-V Hypervisor\Logical Processors
  • B. \Hyper-V Hypervisor Root Virtual Processor(_Total)\% Guest Run Time
  • C. \Hyper-V Hypervisor Virtual Processor(_Total)\% Hypervisor Run Time
  • D. \Hyper-V Hypervisor Logical Processor(_Total)\% Total Run Time

Answer: D

Explanation:
https://msdn.microsoft.com/en-us/library/cc768535(v=bts.10).aspx

NEW QUESTION 4
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have multiple local disks attached.
You need to create a storage pool by using Storage Spaces Direct.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
70-743 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
References: https://docs.microsoft.com/en-us/windows-server/storage/storage-spaces/deploystorage- spaces-direct

NEW QUESTION 5
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has a virtual machine named VM1 that uses a single VHDX file. VM1 is configured shown in the following table:
70-743 dumps exhibit
You plan to use VM1 as a virtual Machine Template to deploy shielded virtual machines. You need to ensure that VM1 can be used to deploy shielded virtual machines.
What should you run?

  • A. the Mount-VHD cmdlet
  • B. the Diskpart command
  • C. the Set-VHD cmdlet
  • D. the Set-VM cmdlet
  • E. the Set-VMHost cmdlet
  • F. the Set-VMProcessor cmdlet
  • G. the Install-WindowsFeature cmdlet
  • H. the Optimize-VHD cmdlet

Answer: B

NEW QUESTION 6
Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \\contoso.com\namespace1.
The domain contains a file server named Server1 that runs Windows Server 2016. You create a folder named Folder1 on Server1.
Which two cmdlets should you use? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

  • A. New-DfsnFolderTarget
  • B. Install-WindowsFeature
  • C. Grant-DfsnAccess
  • D. New-DfsnFolder
  • E. New-SmbShare

Answer: BC

NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might
have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1. You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.
You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You set the Expires after value of the zone. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

Explanation:
https://technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx

NEW QUESTION 8
HOT SPOT
You have a DirectAccess Server that is accessible by using the name directaccess.fabrikam.com On the DirectAccess server, you install a new server certificate that has a subject name of directaccess.contoso.com, and then you configure DNS records for directaccess.contoso.com
You need to change the endpoint name for DirectAccess to directaccess.contoso.com
What command should you run? To answer, select the appropriate options in the answer area.
70-743 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Set-DaClient-ComputerName directaccess.contoso.com

NEW QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals. Refer to exhibit:
70-743 dumps exhibit
Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private VM2 has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1. You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might
have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
70-743 dumps exhibit
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You need to enable the Guest Service integration service for VM1.
Does this meet the goal?

  • A. YES
  • B. NO

Answer: A

NEW QUESTION 11
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed and are nodes in a failover cluster.
On Server1, an administrator creates a virtual machine named VM1. You need to configure VM1 for high availability.
Which tool should you use?

  • A. the clussvc.exe command
  • B. the cluster.exe command
  • C. the Computer Management snap-in
  • D. the configurehyperv.exe command
  • E. the Disk Management snap-in
  • F. the Failover Cluster Manager snap-in
  • G. the Hyper-V Manager snap-in
  • H. the Server Manager app

Answer: F

Explanation:
References:
http://windowsitpro.com/hyper-v/make-vm-highly-available-windows-server-2012

NEW QUESTION 12
You have a Windows Server 2016 failover cluster that contains two servers named Server1 and Server2.
The Cluster Service on Server1 fails.
You need to identify the cause of the failure. What should you do?

  • A. From Event Viewer, review the Application event log.
  • B. From Event Viewer, review the System event log.
  • C. From Windows PowerShell, run the Get-ClusterLog cmdlet.
  • D. From Windows PowerShell, run the Get-ClusterNode cmdle

Answer: B

NEW QUESTION 13
You plan to install a Nano Server on a physical server named Nano1. Nano1 will host several virtual machines that will use live migration.
Which package should you install on Nano1?

  • A. Microsoft-NanoServer-SecureStartup-Package
  • B. Microsoft-NanoServer-ShieldedVM-Package
  • C. Microsoft-NanoServer-Compute-Package
  • D. Microsoft-NanoServer-FailoverCluster-Package
  • E. Microsoft-NanoServer-Storage-Package

Answer: B

NEW QUESTION 14
You have an Active Directory domain named Contoso.com. The domain contains servers named Server1, Server2 and Server3 that run Windows Server 2016.
Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You add a Hyper-V Replica Broker role named Broker1 to Cluster1.
Server3 is a Hyper-V server. A virtual machine named VM1 runs on Server3.
Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only. You need to ensure that you can perform the migration of VM1 to Server2.
What should you do?

  • A. Add the Server3 computer account to the Replicator group on Server1 and Server2.
  • B. Modify the Delegation settings on the Server3 computer account.
  • C. Modify the Storage Migration settings on Server3.
  • D. Modify the Cluster permissions for Cluster1.

Answer: B

Explanation:
If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps.
To configure constrained delegation Etc.
References:
https://technet.microsoft.com/en-us/library/jj134199(v=ws.11).aspx

NEW QUESTION 15
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 have the Hyper-V server role installed.
An iSCSI SAN connects to the network.
You create a LUN on the SAN and configure both servers to connect to the iSCSI target.
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage.
You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.
Which tool should you use?

  • A. the clussvc.exe command
  • B. the cluster.exe command
  • C. the Computer Management snap-in
  • D. the configurehyperv.exe command
  • E. the Disk Management snap-in
  • F. the Failover Cluster Manager snap-in
  • G. the Hyper-V Manager snap-in
  • H. the Server Manager app

Answer: F

Explanation:
References:
https://technet.microsoft.com/en-us/library/jj612868(v=ws.11).aspx https://technet.microsoft.com/en-us/library/jj863389.aspx
To implement certain scenarios for clustered virtual machines, the virtual machine storage and virtual hard disk file should be configured as Cluster Shared Volumes (CSV). To configure a disk in clustered storage as a CSV volume, you can use Failover Cluster Manager or the Windows PowerShellAdd-ClusterSharedVolume cmdlet. For detailed planning considerations and steps to create CSV, see Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster.

NEW QUESTION 16
You have a Nano Server named Nano1. Which cmdlet should you use to identify whether the DNS Server role is installed on Nano1?

  • A. Find-NanoServerPackage
  • B. Get-Package
  • C. Find-Package
  • D. Get-Windows Optional Feature

Answer: B

Explanation:
http://www.thomasmaurer.ch/2017/01/nano-server-powershell-package-management/

NEW QUESTION 17
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN
server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, You modify the Network Policies on Server1. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

NEW QUESTION 18
You are implementing a new network. The network contains a DHCP server named DHCP1 that runs Windows Server 2016. DHCP1 contains a scope named Scope1 for the 192.168.0/24 subnet.
Your company has the following policy for allocating IP addresses: All server addresses must be excluded from DHCP scopes.
All client computer must receive IP addresses from Scope1.
All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240
All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199. You deploy a print device named Print1.
You need to ensure that Print1 adheres to the policy for allocating IP addresses. Which command should you use?

  • A. Add-DhcpServerv4Lease
  • B. Add-DhcpServerv4ExclusionRange
  • C. Add-DhcpServerv4Filter
  • D. Add-DhcpServerv4Reservation

Answer: B

NEW QUESTION 19
You create a Storage Spaces Direct hyper-converged failover cluster. The duster contains three nodes and a 1-TB Storage Spaces Direct volume.
The cluster will store virtual machines.
You plan to extend the volume by adding an additional 3 TB.
What is the minimum amount of extra disk capacity required to accommodate extending the volume?

  • A. 3 TB on the coordinator node
  • B. 3 TB per node
  • C. 4 TB per node
  • D. 4 TB on the coordinator node

Answer: A

NEW QUESTION 20
You deploy a Hyper-V server named Server1 in an isolated test environment. The test environment is prevented from accessing the Internet. Server1 runs the Datacenter edition of Windows Server 2016. You plan to deploy the following guest virtual machines on the server:
70-743 dumps exhibit
Which activation model should you use for the virtual machines?

  • A. Multiple Activation Key (MAK)
  • B. Key Management Service (KMS)
  • C. Original Equipment Manufacturer (OEM) key
  • D. Automatic Virtual Machine Activation (AVMA)

Answer: D

Explanation:
https://technet.microsoft.com/en-us/library/dn303421(v=ws.11).aspx
AVMA lets you install virtual machines on a properly activated Windows server without having to manage product keys for each individual virtual machine, even in disconnected environments. AVMA binds the virtual machine activation to the licensed virtualization server and activates the virtual machine when it starts up. AVMA also provides real-time reporting on usage and historical data on the license state of the virtual machine. Reporting and tracking data is available on the virtualization server.

NEW QUESTION 21
HOTSPOT
You have a server named Server1 that runs Windows Server 2016 and has a Hyper-V server role installed.
You open Disk Management on Server1 as shown in the following graphic.
70-743 dumps exhibit
You plan to configure Disk 13 as a pass-through disk for a generation 1 virtual machine.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
70-743 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-743 dumps exhibit

NEW QUESTION 22
DRAG DROP
You have a server named Server1 that runs Windows Server 2016.
You plan to deploy Internet Information Services (IIS) in a Windows container. You need to prepare Server1 for the planned deployment.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
70-743 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-743 dumps exhibit

NEW QUESTION 23
DRAG DROP
On a new server, you install Windows Server 2016, and then you install the Hyper-V server role. You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server.
Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.
70-743 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/deploycontainers- on-server

NEW QUESTION 24
HOT SPOT
You are configuring internal virtual networks to support multitenancy communication between tenant virtual machine networks and remote sites.
You have a tenant named Tenant1.
You need to enable Border Gateway Protocol (BGP) for Tenant1.
Which commands should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
70-743 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
70-743 dumps exhibit

NEW QUESTION 25
Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 hosts four machines that are members of the domains. The virtual machines are configured as sown in the following table.
70-743 dumps exhibit
Which virtual machines can you manage by using PowerShell Direct?

  • A. Only VM2
  • B. VM1, VM2, and VM4
  • C. only VM4
  • D. VM1, VM2, and VM3

Answer: D

NEW QUESTION 26
You have a server named Server1 that runs Windows Server 2016. The disks on Server1 are configured as shown in the following table:
70-743 dumps exhibit
Windows Server 2016 is installed in C:\Windows.
On which two volumes can you enable data deduplication? Each correct answer presents a complete solution.

  • A. C:
  • B. D:
  • C. E:
  • D. F:
  • E. G:

Answer: CE

Explanation:
Volumes that are candidates for deduplication must conform to the following requirements: References:
https://technet.microsoft.com/en-us/library/hh831700(v=ws.11).aspx

NEW QUESTION 27
Your Network contains one Active Directory domain named contoso.com. You pilot DirectAccess on the network.
During the pilot deployment, you enable DirectAccess only for a group Contoso\Test Computers. Once the pilot is complete, you need to enable DirectAccess for all the client computers in the domain.
What should you do?

  • A. From Windows PowerShell, run the Set-DAClient cmdlet.
  • B. From Windows PowerShell, run the Set-DirectAccess cmdlet.
  • C. From Active Directory Users and Computers, modify the membership of the Windows Authorization Access Group.
  • D. From Group Policy Management, modify the security filtering of an object named Direct Access Client Setting Group Policy.

Answer: D

NEW QUESTION 28
You have a server named Server1 that runs Windows Server 2016. You need to configure Server1 as a Web Application Proxy. Which server role or role service should you install on Server1?

  • A. Web Server (IIS)
  • B. Network Policy and Access Services
  • C. Direct Access and VPN (RAS)
  • D. Active Directory Federation Services
  • E. Remote Access

Answer: E

NEW QUESTION 29
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2016.
You install IP Address Management (IPAM) on Server1.
You need to manually start discovery of servers that IPAM can manage in contoso.com.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
70-743 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
Step 1: Invoke-IpamServerProvisioning Choose a provisioning method
The Invoke-IpamGpoProvisioning cmdlet creates and links three group policies specified in the Domain parameter for provisioningrequired access settingson the server roles managed by the computer running the IP Address Management (IPAM) server.
Step 2: Add-IpamDiscoveryDomain Configure the scope of discovery
The Add-IpamDiscoveryDomain cmdlet adds an Active Directory discovery domain for an IP AddressManagement (IPAM) server. A discovery domain is a domain that IPAM searches to find infrastructure servers. An IPAM server uses the list of discovery domains to determine what type of servers to add. By default, IPAM discovers all domain controllers, Dynamic Host Configuration Protocol (DHCP) servers, and Domain Name System (DNS) servers.
Step 3: Start-ScheduledTask Start server discovery
To begin discovering servers on the network, click Start server discovery to launch the IPAM ServerDiscovery task or use the Start-ScheduledTask command.

NEW QUESTION 30
HOTSPOT
Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1.
You need to view the shares to which users will be redirected when the users attempt to connect to a folder named Folder1 in the DFS namespace.
What cmdlet should you run? To answer, select the appropriate options in the answer area.
70-743 dumps exhibit

  • A. Mastered
  • B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/powershell/module/dfsn/get-dfsnfolder?view=win10-ps

NEW QUESTION 31
......

Recommend!! Get the Full 70-743 dumps in VCE and PDF From Passcertsure, Welcome to Download: https://www.passcertsure.com/70-743-test/ (New 252 Q&As Version)