Accreditations include the evidence your talent, expertise and capacity. They are vital that you get a substantial rated seats in different nicely reputed firm. A accreditation give you the excess expertise and also the standard knowledge for the work that guide anyone to boost up your career. For those who have handed down your recognition exam, ones notice ones requirements have increased in the profession. A internet surveys revealed that the public that have no less than one Pass4sure Microsoft own improved income the fact that other people, any rise minute rates are as well uncovered over additional persons.
2021 Sep 70-533 dumps free download:
Q41. Your company network includes two branch offices. Users at the company access internal virtual machines (VMs).
You want to ensure secure communications between the branch offices and the internal VMs and network.
You need to create a site-to-site VPN connection.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
A. a private IPv4 IP address and a compatible VPN device
B. a private IPv4 IP address and a RRAS running on Windows Server 2012
C. a public-facing IPv4 IP address and a compatible VPN device
D. a public-facing IPv4 IP address and a RRAS running on Windows Server 2012
Answer: C,D
Explanation: C (not A): VPN Device IP Address.- This is public facing IPv4 address of your on-premises VPN device that you’ll use to connect to Azure. The VPN device cannot be located behind a NAT. D (Not B): At least one or preferably two publicly visible IP addresses: One of the IP addresses is used on the Windows Server 2012 machine that acts as the VPN device by using RRAS. The other optional IP address is to be used as the Default gateway for out-bound traffic from the on-premises network. If the second IP address is not available, it is possible to configure network address translation (NAT) on the RRAS machine itself, to be discussed in the following sections. It is important to note that the IP addresses must be public. They cannot be behind NAT and/or a firewall.
Reference: Configure a Site-to-Site VPN in the Management Portal
Site-to-Site VPN in Azure Virtual Network using Windows Server 2012 Routing and Remote Access Service (RRAS)
Q42. You manage an Azure subscription with virtual machines (VMs) that are running in
Standard mode.
You need to reduce the storage costs associated with the VMs.
What should you do?
A. Locate and remove orphaned disks.
B. Add the VMs to an affinity group.
C. Change VMs to the Basic tier.
D. Delete the VHD container.
Answer: C
Explanation: Standard offers 50 GB of storage space, while Basic only gives 10 GB but it will save costs.
Reference: Websites Pricing Details
URL: http://azure.microsoft.com/en-us/pricing/details/websites/
Q43. DRAG DROP
You have an Azure Virtual Network named fabVNet with three subnets named Subnet-1, Subnet-2 and Subnet-3. You have a virtual machine (VM) named fabVM running in the fabProd service.
You need to modify fabVM to be deployed into Subnet-3. You want to achieve this goal by using the least amount of time and while causing the least amount of disruption to the existing deployment.
What should you do? To answer, drag the appropriate Power Shell cmdlet to the correct location in the Power Shell command. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q44. DRAG DROP
You manage an application deployed to a cloud service that utilizes an Azure Storage account.
The cloud service currently uses the primary access key.
Security policy requires that all shared access keys are changed without causing application downtime.
Which three steps should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Q45. DRAG DROP
Your company manages several Azure Web Sites that are running in an existing web-hosting plan named plan1.
You need to move one of the websites, named contoso, to a new web-hosting plan named plan2.
Which Azure PowerShell cmdlet should you use with each PowerShell command line? To answer, drag the appropriate Azure PowerShell cmdlet to the correct location in the PowerShell code. Each PowerShell cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Avant-garde 70-533 exam preparation:
Q46. You migrate a Windows Server .NET web application to Azure Cloud Services.
You need enable trace logging for the application.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Update the service definition file.
B. Update the Azure diagnostics configuration.
C. Update the service configuration file.
D. Enable verbose monitoring.
E. Update the application web.config file.
Answer: A,B
Explanation: You can use Azure logging right out of the box—it’s part of Azure SDK.
A: Azure Service Definition Schema (.csdef File)
The service definition file defines the service model for an application. The file contains the
definitions for the roles that are available to a cloud service, specifies the service
endpoints, and establishes configuration settings for the service.
B: Take Control of Logging and Tracing in Microsoft Azure
The Microsoft.WindowsAzure.Diagnostics namespace, which inherits from and extends
standard System.Diagnostics classes, enables the use of System.Diagnostics as a logging framework in Azure environment.
URLs:
http://msdn.microsoft.com/en-us/library/azure/ee758711.aspx http://msdn.microsoft.com/en-us/magazine/ff714589.aspx
Q47. You administer an Azure Active Directory (Azure AD) tenant where Box is configured for: . Application Access . Password Single Sign-on An employee moves to an organizational unit that does not require access to Box through
the Access Panel.
You need to remove only Box from the list of applications only for this user.
What should you do?
A. Delete the user from the Azure AD tenant.
B. Delete the Box Application definition from the Azure AD tenant.
C. From the Management Portal, remove the user's assignment to the application.
D. Disable the user's account in Windows AD.
Answer: C
Explanation: Note: Use Azure AD to manage user access, provision user accounts, and enable single sign-on with Box. Requires an existing Box subscription.
Q48. You manage an Azure Active Directory (AD) tenant
You plan to allow users to log in to a third-party application by using their Azure AD credentials.
To access the application, users will be prompted for their existing third-party user names and passwords.
You need to add the application to Azure AD.
Which type of application should you add?
A. Existing Single Sign-On with identity provisioning
B. Password Single Sign-On with identity provisioning
C. Existing Single Sign-On without identity provisioning
D. Password Single Sign-On without identity provisioning
Answer: A
Explanation: * Azure AD supports two different modes for single sign-on: / Federation using standard protocols Configuring Federation-based single sign-on enables the users in your organization to be automatically signed in to a third-party SaaS application by Azure AD using the user account information from Azure AD. / Password-based single sign-on * Support for user provisioning
User provisioning enables automated user provisioning and deprovisioning of accounts in third-party SaaS applications from within the Azure Management Portal, using your Windows Server Active Directory or Azure AD identity information. When a user is given permissions in Azure AD for one of these applications, an account can be automatically created (provisioned) in the target SaaS application.
Reference: Application access enhancements for Azure AD
URL: http://msdn.microsoft.com/en-us/library/azure/dn308588.aspx
Q49. You manage an Azure virtual network that hosts 15 virtual machines (VMs) on a single subnet which is used for testing a line of business (LOB) application. The application is deployed to a VM named TestWebServiceVM.
You need to ensure that TestWebServiceVM always starts by using the same IP address. You need to achieve this goal by using the least amount of administrative effort.
What should you do?
A. Use the Management Portal to configure TestWebServiceVM.
B. Use RDP to configure TestWebServiceVM.
C. Run the Set-AzureStaticVNetIP PowerShell cmdlet.
D. Run the Get-AzureReservedIP PowerShell cmdlet.
Answer: C
Explanation: Specify a static internal IP for a previously created VM
If you want to set a static IP address for a VM that you previously created, you can do so by using the following cmdlets. If you already set an IP address for the VM and you want to change it to a different IP address, you’ll need to remove the existing static IP address before running these cmdlets. See the instructions below to remove a static IP. For this procedure, you’ll use the Update-AzureVM cmdlet. The Update-AzureVM cmdlet restarts the VM as part of the update process. The DIP that you specify will be assigned after the VM restarts. In this example, we set the IP address for VM2, which is located in cloud service StaticDemo.
Get-AzureVM -ServiceName StaticDemo -Name VM2 | Set-AzureStaticVNetIP -IPAddress
192.168.4.7 | Update-AzureVM
Reference: Configure a Static Internal IP Address (DIP) for a VM URL: http://msdn.microsoft.com/en-us/library/azure/dn630228.aspx
Q50. You administer an Azure Web Site named contoso. The development team has implemented changes to the website that need to be validated.
You need to validate and deploy the changes with minimum downtime to users.
What should you do first?
A. Create a new Linked Resource.
B. Configure Remote Debugging on contoso.
C. Create a new website named contosoStaging.
D. Create a deployment slot named contosoStaging.
E. Back up the contoso website to a deployment slot.
Answer: D
Explanation: When you deploy your application to Azure Websites, you can deploy to a separate deployment slot instead of the default production slot, which are actually live sites with their own hostnames.
Furthermore, you can swap the sites and site configurations between two deployment slots, including the production slot. Deploying your application to a deployment slot has the following benefits:
* You can validate website changes in a staging deployment slot before swapping it with the production slot.
* After a swap, the slot with previously staged site now has the previous production site. If the changes swapped into the production slot are not as you expected, you can perform the same swap immediately to get your "last known good site" back.
* Deploying a site to a slot first and swapping it into production ensures that all instances of the slot are warmed up before being swapped into production. This eliminates downtime when you deploy your site. The traffic redirection is seamless, and no requests are dropped as a result of swap operations.
Reference: Staged Deployment on Microsoft Azure Websites