Cause all that matters here is passing the Microsoft exam collections 70 410 exam. Cause all that you need is a high score of 70 410 pdf Installing and Configuring Windows Server 2012 exam. The only one thing you need to do is downloading Testking 70 410 exam dumps exam study guides now. We will not let you down with our money-back guarantee.

♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Microsoft 70-410 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on:

Q201. - (Topic 3) 

Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2. 

Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. 

You take a snapshot of VM1, and then you install an application on VM1. 

You verify that the application runs properly. 

You need to ensure that the current state of VM1 is contained in a single virtual hard disk file. The solution must minimize the amount of downtime on VM1. 

What should you do? 

A. From Hyper-V Manager, delete the snapshot. 

B. From a command prompt, run dism.exe and specify the /commit-image parameter. 

C. From a command prompt, run dism.exe and specify the /delete-image parameter. 

D. From Hyper-V Manager, inspect the virtual hard disk. 



Virtual machine snapshots are file-based snapshots of the state, disk data, and configuration of a virtualmachine at a specific point in time. You can take multiple snapshots of a virtual machine, even while it is running. You can then revert the virtual machine to any of the previous states by App1ying a snapshot to the virtualmachine. Taking a snapshot of a VM is to in essence freeze the current state and make it a parent disk based on currentstate, and at the same time create a child disk to capture all subsequent changes. – See more at: Snapshots require adequate storage space. Snapshots are stored as .avhd files in the same location at thevirtual hard disk. Taking multiple snapshots can quickly consume a large amount of storage space. When you use Hyper-V Manager to delete a snapshot, the snapshot is removed from the snapshot treebut the .avhd file is not deleted until you turn off the virtual machine. 

Q202. HOTSPOT - (Topic 2) 

Your network contains an Active Directory domain named The domain 

contains a server named Server that runs Windows Server 2012 R2. 

You perform a Server Core Installation of Windows Server 2012 R2 on a new server. 

You need to ensure that you can add the new server to Server Manager on Server1. 

What should you configure on the new server? To answer, select the appropriate setting in 

the answer area. 


Q203. - (Topic 1) 

Your network contains an Active Directory domain named The domain contains an Application server named Server1. Server1 runs Windows Server 2012 R2. 

Server1 is configured as an FTP server. 

Client computers use an FTP Application named App1.exe. App1.exe uses TCP port 21 as 

the control port and dynamically requests a data port. 

On Server1, you create a firewall rule to allow connections on TCP port 21. You need to configure Server1 to support the client connections from App1.exe. What should you do? 

A. Run netshadvfirewall set global statefulftp enable. 

B. Create an inbound firewall rule to allow App1.exe. 

C. Create a tunnel connection security rule. 

D. Run Set-NetFirewallRule -DisplayName DynamicFTP -Profile Domain 



The netsh firewall context is supplied only for backward compatibility. We recommend that you do not use this context on a computer that is running Windows Vista or a later version of Windows. In the netsh advfirewall firewall context, the add command only has one variation, the add rule command. Netsh advfirewall set global statefulftp: Configures how Windows Firewall with Advanced Security handles FTP traffic that uses an initial connection on one port to request a data connection on a different port. When statefulftp is enabled, the firewall examines the PORT and PASV requests for these other port numbers and then allows the corresponding data connection to the port number that was requested. Syntax set global statefulftp { enable | disable | notconfigured } Parameters statefulftp can be set to one of the following values: enable The firewall tracks the port numbers specified in PORT command requests and in the responses to PASV requests, and then allows the incoming FTP data traffic entering on the requested port number. disable This is the default value. The firewall does not track outgoing PORT commands or PASV responses, and so incoming data connections on the PORT or PASV requested port is blocked as an unsolicited incoming connection. notconfigured Valid only when netsh is configuring a GPO by using the set store command. 

Q204. - (Topic 3) 

A company’s network administrator needs to ensure a specific IP address is never assigned by a Windows Server 2012 R2 DHCP server to any device connecting to the network. 

Which of the following should the administrator configure on the Windows Server 2012 R2 DHCP server? 

A. Reservation 

B. Scope options 


D. Scope properties 



Configuring an IP address as a reservation will restrict a DHCP server’s assignment of that address unless a specific MAC address makes a request for the address. Exclusion is for not use the IP Address or range inside the Scope Pool, Filter is for not use theMAC Address or range. Quick Tip: Policies can also be defined per scope or server. Policy based assignment (PBA) allows an administrator to group DHCP clients by specific attributes based on fields contained in the DHCP client request packet. This feature allows for targeted administration and greater control of configuration parameters delivered to network devices. 

Q205. - (Topic 3) 

Your network contains an Active Directory domain named 

All servers run Windows Server 2012 R2. 

An application named Appl.exe is installed on all client computers. Multiple versions of Appl.exe are installed on different client computers. Appl.exe is digitally signed. 

You need to ensure that only the latest version of Appl.exe can run on the client computers. 

What should you create? 

A. An application control policy packaged app rule 

B. A software restriction policy certificate rule 

C. An application control policy Windows Installer rule 

D. An application control policy executable rule 



A. A publisher rule for a Packaged app is based on publisher, name and version B. You can create a certificate rule that identifies software and then allows or does not allow the software torun, depending on the security level. 

C. For .msi or .msp 

D. Executable Rules, for .exe and can be based on Publisher, Product name, filename and version. Use Certificate Rules on Windows Executables for Software Restriction Policies This security setting determines if digital certificates are processed when a user or process attempts to run software with an .exe file name extension. This security settings is used to enable or disable certificate rules, a type of software restriction policies rule. With software restriction policies, you can create a certificate rule that will allow or disallow software that is signed by Authenticode to run, based on the digital certificate that is associated with the software. In order for certificate rules to take effect, you must enable this security setting. When certificate rules are enabled, software restriction policies will check a certificate revocation list (CRL) to make sure the software’s certificate and signature are valid. This may decrease performance when start signed programs. You can disable this feature. On Trusted Publishers Properties, clear the Publisher and Timestampcheck boxes. 

Q206. - (Topic 3) 

Your network contains one Active Directory domain named The domain contains 10 domain controllers and a read-only domain controller (RODC) named RODC01. 

You plan to deploy a child domain for in Microsoft Azure. 

To the Azure subscription, you add several virtual machines that have a Server Core installation of Windows Server 2012 R2. 

You need to create the new domain on one of the virtual machines. 

Which tool should you use? 

A. the ntdsutil command 

B. the Set-ADDomain cmdlet 

C. the Install-ADDSDomain cmdlet 

D. the dsadd command 

E. the dsamain command 

F. the dsmgmt command 

G. the net user command 

H. the Set-ADForest cmdlet 


Explanation: The Install-ADDSDomain cmdlet installs a new Active Directory domain configuration. 

Q207. HOTSPOT - (Topic 2) 

The settings for a virtual machine named VM2 are configured as shown in the VM2 exhibit. (Click the Exhibit button.) 

The settings for Disk1.vhdx are configured as shown in the Disk1.vhdx exhibit. (Click the Exhibit button.) 

The settings for Disk2.vhdx are configured as shown in the Disk2.vhdx exhibit. (Click the Exhibit button.) 

Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point. 


Q208. DRAG DROP - (Topic 3) 

Your network contains an Active Directory domain named The domain 

contains a domain controller named DC1 that has the DNS Server server role installed. DC1 hosts an Active Directory-integrated zone for the domain. The domain contains a member server named Server1. 

You install the DNS Server server role on Server1. 

You need to ensure that Server1 can respond authoritatively to queries for the existing namespace. 

Which cmdlets should you run on each server? (To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.) 


Q209. - (Topic 3) 

Your network contains an Active Directory domain named The domain 

contains a server named Server1. Server1 runs Windows Server 2012 R2. 

You plan to create a shared folder. The shared folder will have a quota limit. 

You discover that when you run the New Share Wizard, you cannot select the SMB Share 


Advanced option. 

You need to ensure that you can use SMB Share – Advanced to create the new share. 

What should you do on Server1 before you run the New Share Wizard? 

A. Run the Set-SmbShare cmdlet. 

B. Install the File Server Resource Manager role service. 

C. Configure Dynamic Access Control and Apply a central access policy. 

D. Configure the Advanced system settings. 


Q210. - (Topic 3) 

You work as a senior administrator at The network consists of a single domain named All servers on the network have Windows Server 2012 installed, and all workstations have Windows 8 installed. 

You are running a training exercise for junior administrators. You are currently discussing the Always Offline Mode. 

Which of the following is TRUE with regards to the Always Offline Mode? (Choose all that apply.) 

A. It allows for swifter access to cached files and redirected folders. 

B. To enable Always Offline Mode, you have to satisfy the forest and domain functional-level requirements, as well as schema requirements 

C. It allows for lower bandwidth usage due to users are always working offline. 

D. To enable Always Offline Mode, you must have workstations running Windows 7 or Windows Server 2008 R2. 

Answer: A,C 


There are no domain/forest/schema requirements, but clients must be running Windows 

8/Windows Server 2012 or later. 

Offline Files have four modes of operation: 

Online Slow link Auto offline Manual offline Offline Files transition between the three modes online, slow link and auto offline depending on connection speed. The user can always override the automatic mode selection by manually switching to manual offline mode. To determine the connection speed two pings with default packet size are sent to the file server. If the average round-trip time is below 80 ms (Windows 7) or 35 ms (Windows 8), the connection is put into online mode, otherwise into slow link mode. The latency value of 35/80 ms is configurable through the Group Policy setting Configure slow-link mode. Reads, Writes and Synchronization In online mode, changes to files are made on the file server as well as in the local cache (this induces a performance hit – see this article for details). Reads are satisfied from the local cache (if in sync). In slow link mode, changes to files are made in the local cache. The local cache is background-synchronized with the file server every 6 hours (Windows 7) or 2 hours (Windows 8), by default. This can be changed through the Group Policy setting Configure Background Sync. . In auto offline mode, all reads and writes go to the local cache. No synchronization occurs. . In manual offline mode, all reads and writes go to the local cache. No synchronization occurs by default, but background synchronization can be enabled through the Group Policy setting Configure Background Sync.