Test 70-410, complete name since Installing and Configuring Windows Server 2012. 70-410 assessment is actually a wonderful qualifications than it that is definitely ordered to provide by means of countless Them specialists to get large rank and high level of interest in their applicable topic. Recognition of Test 70-410 delivers clear options to get beneficial employment and career. By getting Microsoft 70-410 qualifications youll be able to lift up your value and cost looking at your own organisations.

♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Microsoft 70-410 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 70-410 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/70-410-exam-dumps.html

2021 Apr 70-410 simulations

Q251. - (Topic 3) 

You have a Hyper-V host named Hyper1 that runs Windows Server 2012 R2. 

Hyper1 hosts several virtual machines that run Windows 8.1. 

Several developers connect to the virtual machines by using the Virtual Machine Connection tool. 

You need to ensure that the devlopers can print to their local printers from within virtual machine sessions. 

What should you configure? 

A. a virtual switch on Hyper1 

B. Remote Desktop Services (RDS) on Hyper1 

C. enhanced session mode on Hyper1 

D. a virtual network adapter on the virtual machines 


Explanation: To be able to use a computer’s local resources on a virtual machine: 

* The Hyper-V host must have Enhanced session mode policy and Enhanced session mode settings turned on. 

* The computer that you use to connect to the virtual machine with VMConnect must run Windows 8, Windows 8.1, Windows Server 2012, or Windows Server 2012 R2. 

* The virtual machine must have Remote Desktop Services enabled and run Windows Server 2012 R2 or Windows 8.1 as the guest operating system. 

Reference: Use local resources on Hyper-V virtual machine with VMConnect 


Q252. - (Topic 1) 

Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V 

hosts contain several virtual machines that run Windows Server 2012 R2. 

You install the Network Load Balancing feature on the virtual machines. 

You need to configure the virtual machines to support Network Load Balancing (NLB). 

Which virtual machine settings should you configure? 

A. DHCP guard 

B. Port mirroring 

C. Router guard 

D. MAC address 



http://social.technet.microsoft.com/Forums/windowsserver/en-US/5b3a0a9d-26a2-49ba-bbbe- 29d11fcbb7ce/nlb-on-hyperv?forum=winserverhyperv 

For NLB to be configured you need to enable MAC address spoofing. 

Q253. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. All user accounts in the sales department reside in an organizational unit (OU) named OU1. 

You have a Group Policy object (GPO) named GPO1. GPO1 is used to deploy a logon script to all of the users in the sales department. 

You discover that the logon script does not run when the sales users log on to their computers. You open Group Policy Management as shown in the exhibit. 

You need to ensure that the logon script in GPO1 is applied to the sales users. What should you do? 

A. Enforce GPO1. 

B. Modify the link order of GPO1. 

C. Modify the Delegation settings of GPO1. 

D. Enable the link of GPO1. 


Q254. - (Topic 2) 

Your network contains an Active Directory domain named adatum.com. The domain contains a member server named L0N-DC1. L0N-DC1 runs Windows Server 2012 R2 and has the DHCP Server server role installed. 

The network contains 100 client computers and 50 IP phones. The computers and the phones are from the same vendor. 

You create an IPv4 scope that contains addresses from to 

You need to ensure that the IP phones receive IP addresses in the range of to The solution must minimize administrative effort. 

What should you create? 

A. Server level policies 

B. Reservations 

C. Filters 

D. Scope level policies 



The scope is already in place. 

Scope level policies are typically settings that only apply to that scope. They can also 

overwrite a setting that was set at the server level. 

When a client matches the conditions of a policy, the DHCP server responds to the clients 

based on the settings of a policy. 

Settings associated to a policy can be an IP address range and/or options. 

An administrator could configure the policy to provide an IP address from a specified sub-range within the overall IP address range of the scope. 

You can also provide different option values for clients satisfying this policy. 

Policies can be defined server wide or for a specific scope. 

A server wide policy – on the same lines as server wide option values – is applicable to all 

scopes on the DHCP server. 

A server wide policy however cannot have an IP address range associated with it. 

There a couple of ways to segregate clients based on the type of device. One way to do 

this is by using vendor class/identifier. 

This string sent in option 60 by most DHCP clients identify the vendor and thereby the type 

of the device. 

Another way to segregate clients based on device type is by using the MAC address prefix. 

The first three bytes of a MAC address is called OUI and identify the vendor or 

manufacturer of the device. 

By creating DHCP policies with conditions based on Vendor Class or MAC address prefix, 

you can now segregate the clients in your subnet in such a way, that devices of a specific 

type get an IP address only from a specified IP address range within the scope. You can 

also give different set of options to these clients. 

In conclusion, DHCP policies in Windows Server 2012 R2 enables grouping of 

clients/devices using the different criteria and delivering targeted network configuration to 


Policy based assignment in Windows Server 2012 R2 DHCP allows you to create simple 

yet powerful rules to administer DHCP on your network. 

References: Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, p.253 

Q255. HOTSPOT - (Topic 3) 

You have a Server Core 2012 installation and all roles and features removed. The server does not haveaccess to Windows Update. You mount the network volume containing the installation files for Server 2012. 

You need to install DNS and DHCP server role. 

Which directory do you reference for installing? 


Far out 70-410 test preparation:

Q256. - (Topic 2) 

You have a server named Server1 that runs Windows Server 2012 R2. 

You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the 

installation fails repeatedly. 

You need to ensure that the feature can be installed on Server1. 

What should you do? 

A. Run the Add-AppxProvisionedPackage cmdlet. 

B. Disable User Account Control (UAC). 

C. Connect Server1 to the Internet. 

D. Remove the .NET Framework 4.5 Features feature. 


Q257. - (Topic 2) 

You have a server named Server1 that runs Windows Server 2012 R2. 

A network technician installs a new disk on Server1 and creates a new volume. The properties of the new volume are shown in the exhibit. (Click the Exhibit button.) 

You need to ensure that you can enable NTFS disk quotas for volume D. 

What should you do first? 

A. Install the File Server Resource Manager role service. 

B. Format volume D. 

C. Run the convert.exe command. 

D. Convert the disk to a dynamic disk. 



ReFS-formatted disks cannot use NTFS disk quotas, so the drive must be formatted as an NTFS partition 

Q258. - (Topic 3) 

You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 R2 installed. 

You are running a training exercise for junior administrators. You are currently discussing the new VHD format called VHDX. 

Which of the following is TRUE with regards to VHDX? (Choose all that apply.) 

A. It supports virtual hard disk storage capacity of up to 64 GB. 

B. It supports virtual hard disk storage capacity of up to 64 TB. 

C. It does not provide protection against data corruption during power failures. 

D. It has the ability to store custom metadata about the file that the user might want to record. 

Answer: B,D 


The main new features of the VHDX format are: Support for virtual hard disk storage capacity of up to 64 TB. Protection against data corruption during power failures by logging updates to the VHDX metadata structures. Improved alignment of the virtual hard disk format to work well on large sector disks. The VHDX format also provides the following features: Larger block sizes for dynamic and differencing disks, which allows these disks to attune to the needs of the workload. A 4-KB logical sector virtual disk that allows for increased performance when used by applications and workloads that are designed for 4-KB sectors. The ability to store custom metadata about the file that the user might want to record, such as operating system version or patches applied. Efficiency in representing data (also known as “trim”), which results in smaller file size and allows the underlying physical storage device to reclaim unused space. (Trim requires physical disks directly attached to a virtual machine or SCSI disks, and trim-compatible hardware). VHDX Format – Features and Benefits VHDX format features provide features at the virtual hard disk as well as virtual hard disk file layers and is optimized to work well with modern storage hardware configurations and capabilities. At the virtual hard disk layer, benefits include the ability to represent a large virtual disk size up to 64 TB, support larger logical sector sizes for a virtual disk up to 4 KB that facilitates the conversion of 4 KB sector physical disks to virtual disks, and support large block sizes for a virtual disk up to 256 MB that enables tuning block size to match the IO patterns of the application or system for optimal performance. At the virtual hard disk file layer, the benefits include the use of a log to ensure resiliency of the VHDX file to corruptions from system power failure events and a mechanism that allows for small pieces of user generated data to be transported along with the VHDX file. On modern storage platforms, the benefits include optimal performance on host disks that have physical sector sizes larger than 512 bytes through improved data alignment and capability to use the information from the UNMAP command, sent by the application or system using the virtual hard disk, to optimize the size of the VHDX file. The format is designed so that additional features could be introduced in the future by Microsoft or extended by other parser implementations. The format provides parsers the ability to detect features in a VHDX file that a parser does not understand. 

Q259. - (Topic 3) 

Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs Windows 8. DC1 is configured as a DHCP server as shown in the exhibit. Computer1 is configured to obtain an IP address automatically. 

You need to ensure that Computer1 can receive an IP address from DC1. 

What should you do? 

A. Disable the Allow filters. 

B. Disable the Deny filters 

C. Activate Scope [] Contoso.com. 

D. Authorize dc1.contoso.com. 



A red down arrow indicates an unauthorized DHCP server. A DHCP server that is a domain controller or a member of an Active Directory domain queries Active Directory for the list of authorized servers (identified by IP address). If its own IP address is not in the list of authorized DHCP servers, the DHCP Server service does not complete its startup sequence and automatically shuts down. 

Q260. - (Topic 1) 

You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 has the virtual switches listed in the following table. 

You create a virtual machine named VM1.VM1 has two network adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2.You configure NIC teaming on VM1. 

You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network. 

What should you do on Server1? 

A. Run the Set-VmNetworkAdaptercmdlet. 

B. Add a new network adapter to VM1. 

C. Create a new virtual switch on Server 1. 

D. Modify the properties of vSwitch1 and vSwitch2.