It is impossible to pass Cisco 400-151 exam without any help in the short term. Come to us soon and find the most advanced, correct and guaranteed . You will get a surprising result by our .

Check 400-151 free dumps before getting the full version:

NEW QUESTION 1
Refer to the exhibit.
400-151 dumps exhibit
You have been investigating an issue with your Cisco UCS blade booting from remote Fibre Channel storage. Upon inspection, you see the output in the exhibit. Which two statements are true? (Choose two)

  • A. FC_ID 0x5e01ef is that of the storage array
  • B. FC_ID 0x5e003c is that of the HBA
  • C. FC_ID 0x5e003c is that of the MDS or Cisco Nexus 5000 Series Switch
  • D. FC_ID 0x5e003c is that of the storage array
  • E. FC_ID 0x5e01ef is that of the MDS or Cisco Nexus 5000 Series Switch

Answer: AB

Explanation: https://nicholasgerasimatos.wordpress.com/2014/01/10/cisco-ucs-boot-from-santroubleshooting/

NEW QUESTION 2
Which four options are part of Cisco ONE Enterprise Cloud Suite product portfolio? (Choosefour)

  • A. Cisco Intercloud Fabric for Business
  • B. Cisco Virtual Application Container Services
  • C. Application Policy Infrastructure Controller
  • D. Cisco Open SDN Controller
  • E. Cisco Prime Service Catalog
  • F. Cisco UCS Director
  • G. Cisco WAAS
  • H. Cisco ASA

Answer: ABEF

NEW QUESTION 3
Which two statements about the Cisco Fibre Channel Domain feature and persistent FC IDs are true? (Choose two.)

  • A. A persistent FC ID that is assigned to an F Port cannot be moved across interfaces if the same persistent FC ID is to be maintained.
  • B. When persistent FC IDs are enabled, FC IDs cannot be changed after a reboot.
  • C. If you connect to the switch from a Windows host, be sure to enable the persistent FC ID feature in the VSAN that connects these hosts.
  • D. The current FC IDs in use in the fcdomain are saved across reboots.
  • E. Entries that the switch has learned must be manually acknowledged to be stored in the FCDomain FCID database.

Answer: BD

NEW QUESTION 4
In an ACI fabric, which three types of interface are supported on border leaf switches to connect to
an external router? (Choose three)

  • A. sub interface with 802 1Q tagging
  • B. 1GbE Interface
  • C. any interfaces that supports VXLAN encapsulation
  • D. Layer 3 interface
  • E. 10GbE interface
  • F. switch virtual interface

Answer: ADF

Explanation: Using More than two Border leaf Switches
Border leaf switches support three types of interfaces to connect to an external router:
• Layer 3 (routed) interface
• Sub interface with IEEE 802.1Q tagging
• Switched Virtual Interface (SVI)

NEW QUESTION 5
Which IETF standard is the most efficient messaging protocol used in anloT network?

  • A. SNMP
  • B. HTTP
  • C. CoAP
  • D. MQTT

Answer: C

NEW QUESTION 6
Which three options are SDN Southbound protocols? (Choose three)

  • A. API
  • B. OVSDB
  • C. OpenFlow
  • D. Puppet
  • E. PCEP
  • F. VXLAN

Answer: BCE

NEW QUESTION 7
Which two prerequisites for BFD are true? (Choose two)

  • A. Install NETWORK_SERVICES_PKG license
  • B. For Layer 3 port channels used by BFD, you must enable LACP on the port channel
  • C. Disable the IP packet verification check for identical IP source and destination addresses
  • D. Enable ICMP redirect messages on BFD-enabled interfaces
  • E. For Layer 2 port channels used by BFD, you must disable LACP on the port channel

Answer: BC

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/interfaces/configuration/guide/if_cli/if_bfd.html

NEW QUESTION 8
Which three options can be used to determine REST API code to create an EPG? (Choose three)

  • A. Perform HTTP GET method on Error! Hyperlink reference not vali
  • B. IP>/doc/epg.xml which will return you necessary data to create EPG
  • C. by downloading the xml configuration file and looking up and EPG configuration
  • D. using the API inspector when creating a test EPG
  • E. using the APIC management information tree
  • F. Call epgCreate() function in Cobra API standard library
  • G. using the show EPG configuration on the CLI of the APIC

Answer: CDF

NEW QUESTION 9
Which programming language is used to write custom workflow code in Cisco UCS Director?

  • A. Python
  • B. Java script
  • C. Java
  • D. Bash script

Answer: B

NEW QUESTION 10
Which protocol does NX-API use as its transport

  • A. HTTP/HTTPS
  • B. SCP
  • C. SFTP
  • D. FTP
  • E. SSH

Answer: A

NEW QUESTION 11
In a multiple vendor environment,which approach is recommended in cisco NX-OS to generate the BGP router distinguisher and router target?

  • A. Manually configure router-distinguisher and auto generate rouer-tarfet values
  • B. Manually configure router-distinguisher and route-target values
  • C. Auto generate route-distinguisher and route-target values
  • D. Auto generate route-distinguisher and route-target values and make manual adjustments

Answer: B

NEW QUESTION 12
Which definition of Intelligent Service Card Manager is true?

  • A. part of the RISE service that resides on an appliance (for example, Citrix NetScaler) that is responsible for sending Route Health Injection messages to a Cisco Nexus switch
  • B. management software to manage provisioning of RISE services on a Cisco Nexusswitch
  • C. management software to manage Cisco Nexus devices
  • D. part of the RISE service that resides on a Cisco Nexus switch that is responsible for handlingtasks related to receiving Route Health Injection messages from appliances and programmingthose routes in the universal routing information base
  • E. part of the RISE service that is responsible for establishing initial connectivity with remoteappliances (for exampl
  • F. Citrix NetScaler)

Answer: D

NEW QUESTION 13
Which way to configure a redundant rendezvous point for BIDIR multicast are valid?

  • A. phantom RP
  • B. anycast RP
  • C. auto RP
  • D. MSDP

Answer: A

NEW QUESTION 14
Which two statements about policing, queuing,and scheduling ate true? (Choose two)

  • A. You can schedule traffic by imposing a maximum data rate on a class of traffic so that excess packets are dropped from the queue
  • B. You can apply WRED to a class of traffic, which allows packets to be dropped based on the CoS field.
  • C. The WRED algorithm is a reactive approach that only applies to traffic confestion
  • D. Policing is the monitoring of data rates for a particular class of traffic, The device can also monitor associated burst sizes
  • E. Only single rate and dual rate policers can be defined.

Answer: BD

NEW QUESTION 15
You are configuring an ACI fabric with Layer 3 out connecticity you want to allow traffic to traverse
from one external EPG to another external EPG. or alternatively to another internal EPG.
Which option must be configured to permit the packets between these two EPGs, assuming the subnet is already being advertised correctly?

  • A. Export Route Control
  • B. Aggregate Export
  • C. Security import subnet
  • D. Import Route Control
  • E. Aggregate Import

Answer: C

NEW QUESTION 16
Within Platform as a Service, which two components are managed by the customer? (Choose two.)

  • A. data
  • B. applications
  • C. networking
  • D. middleware
  • E. operating system

Answer: AB

NEW QUESTION 17
DRAG DROP
Drag and drop the fault from the left onto its correct description on the right.
400-151 dumps exhibit

    Answer:

    Explanation: Informational -- a basic notification or informational message
    Minor -- a non service-effecting fault condition that requires corrective action to prevent a more serious fault from occuring
    Major -- a service-effecting condition that requires urgent corrective action
    Critical -- a service-effecting condition that requires immediate corrective action
    Warning --a potential or impending service-effecting fault that currently has no significance effects in the system

    NEW QUESTION 18
    Which definition of Intelligent Service Card Manager is true?

    • A. part of the RISE service that is responsible for establishing initial connectivity with remote appliances (for exampl
    • B. Citrix NetScaler)
    • C. management software to manage Cisco Nexus devices
    • D. management software to manage provisioning of RISE services on a Cisco Nexus switch
    • E. part of the RISE service that resides on a Cisco Nexus switch that is responsible for handling tasks related to receiving Route Health Injection massages from appliances and programming those routes in the universal routing information base
    • F. part of the RISE service that resides on an appliance (for example, Citrix NetScaler) that is responsible for sending Route Health Injection massages to a Cisco Nexus switch

    Answer: A

    NEW QUESTION 19
    Which two cluster interface types are valid when integrating a Layer 4 –Layer 7device in an ACI
    Fabric? (Choose two)

    • A. outside
    • B. inside
    • C. provider
    • D. consumer
    • E. control

    Answer: CD

    P.S. Easily pass 400-151 Exam with 276 Q&As 2passeasy Dumps & pdf Version, Welcome to Download the Newest 2passeasy 400-151 Dumps: https://www.2passeasy.com/dumps/400-151/ (276 New Questions)