It is impossible to pass Cisco 300 101 pdf exam without any help in the short term. Come to Actualtests soon and find the most advanced, correct and guaranteed Cisco route 300 101 practice questions. You will get a surprising result by our Update ROUTE Implementing Cisco IP Routing practice guides.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 300-101 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 300-101 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/300-101-exam-dumps.html
P.S. Best Quality 300-101 lab are available on Google Drive, GET MORE: https://drive.google.com/open?id=1BHb398qwKUUDgc3Vdghj3SxO9n6grhvU
New Cisco 300-101 Exam Dumps Collection (Question 2 - Question 11)
New Questions 2
Refer to the following configuration command.
router(conttg)# ip nat inside source static tcp 172.16.10.8 8080 172.16.10.8 80 Which statement about the command is true?
A. Any packet that is received in the inside interface with a source IP port address of 172.16.10.8:80 is translated to 172.16.10.8 8:80
B. Any packet that is received in the inside interface with a source IP address of 172 16 10 8 is redirected to port 8080 or port 80
C. The router accepts only a TCP connection from port 8080 and port 80 on IP address 172 16 10 8
D. Any packet that is received in the inside interface with a source IP port address of 172 16 10 8 8080 is translated to 172.16.10.8 80
Answer: D
Explanation: http://www.cisco.com/c/en/us/support/docs/ip/network-address-translation-nat/13772-12.html#topic9
New Questions 3
A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C.
Which configuration on Router B will achieve the desired effect?
A. access-list 1 permit 172.16.10.0 0.0.0.255!interface s0ip policy route-map policy!route-
map policy permit 10match ip address 1set ip next-hop 172.16.12.3
B. access-list 1 permit 172.16.10.0 0.0.0.255!interface e0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.12.2
C. access-list 1 permit 172.16.10.0 0.0.0.255!interface e0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.14.4
D. access-list 1 deny 172.16.10.0 0.0.0.255!interface s0ip policy route-map policy!route- map policy permit 10match ip address 1set ip next-hop 172.16.12.2
Answer: A
Explanation:
The u201cnext-hopu201d IP address should be the E1 interface of router C (172.16.12.3).
New Questions 4
When ospf is forming an adjacency, in which state, the actual exchange of information in the link
A. INIT
B. loading
C. exstart
D. exchange
Answer: B
New Questions 5
Refer to the exhibit.
The 6to4 overlay tunnel configuration has been applied on each router to join isolated IPv6 networks over a IPv4 network. Which statements regarding the 6to4 overlay tunnel is true?
A. The least significant 32 bits in the address referenced by the ipv6 route 2002::/16 Tunnel0 command will correspond to the interface E0/0 IPv4 address
B. The least significant 32 bits in the address referenced by the ipv6 route 2002::/16 Tunnel0 command will correspond to the IPv4 address assigned to the tunnel source
C. The configuration is invalid since the tunnel source command must be configured with an IPv6 address
D. This is actually a configuration example of an IPv4-compatible tunnel and not a 6to4 tunnel
E. This is actually a configuration example of an ISATAP overlay tunnel and not a 6to4 tunnel
Answer: B
Explanation:
6to4 tunnels use IPv6 addresses that concatenate 2002::/16 with the 32-bit IPv4 address of the edge router, creating a 48-bit prefix. The tunnel interface on R1 has an IPv6 prefix of 2002:4065:4001:1::/64, where 4065:4001 is the hexadecimal equivalent of 64.101.64.1, the IPv4 address of its interface in the IPv4 network. The tunnel interface on R2 has an IPv6 prefix of 2002:4065:4101:1::/64, where 4065:4101 is the hexadecimal equivalent of 64.101.65.1, the IPv4 address of its interface in the IPv4 network.
When R1 receives a packet with IPv6 destination address of 2002:4065:4101:1:: (from the left IPv6 network, for example) R1 will:
* Take the IPv6 destination address of that packet (2002:4065:4101:1::) and convert it into
an IPv4 address. In this case, the IPv4 address is 40.65.41.01 in hexa, which is 64.101.65.1 in decimal format.* R1 encapsulates the IPv6 packet in an IPv4 packet with a destination address of 64.101.65.1; the packet is routed normally through the IPv4 network to R2* R2 receives the IPv4 packet, decapsulates and routes it normally to its final IPv6 destination.
New Questions 6
An administrator needs to setup an NTP client to provide updates to local without synchronizing to server. What is the command?
A. Serve
B. Serve-only
C. peer
Answer: A
New Questions 7
A network engineer is considering enabling load balancing with EIGRP. Which consideration should be analyzed?
A. EIGRP allows a maximum of four paths across for load balancing traffic.
B. By default, EIGRP uses a default variance of 2 for load balancing.
C. EIGRP unequal path load balancing can result in routing loops.
D. By default, EIGRP performs equal cost load balancing at least across four equal cost paths.
Answer: D
New Questions 8
What is the purpose of configuring the router as a PPPoE client?
A. to provide VPN access over L2TP
B. to enable PPP session from the router to the termination device at the headend for metroEthernet connectivity
C. for DSL connectivity and removing the need for the end-user PC to run the PPPoE client software
D. for connecting the router to a cable modem, which bridges the Ethernet frames from the router to the cable modem termination system
Answer: C
Explanation:
DSL Technology used PPPoE protocol (service provide end) and user end required to be used same Protcol running as client to communicate with it
New Questions 9
Which two protocols can be affected by MPP? (Choose two)
A. POP
B. SMTP
C. HTTP
D. SFTP
E. SSH
Answer: C,E
Explanation: Following are the management protocols that the MPP feature supports. These management protocols are also the only protocols affected when MPP is enabled.
u2022http://www.cisco.com/c/dam/en/us/td/i/templates/blank.gifBlocks Extensible Exchange Protocol (BEEP)
u2022http://www.cisco.com/c/dam/en/us/td/i/templates/blank.gifFTP
u2022http://www.cisco.com/c/dam/en/us/td/i/templates/blank.gifHTTP
u2022http://www.cisco.com/c/dam/en/us/td/i/templates/blank.gifHTTPS
u2022http://www.cisco.com/c/dam/en/us/td/i/templates/blank.gifSSH, v1 and v2
u2022http://www.cisco.com/c/dam/en/us/td/i/templates/blank.gifSNMP, all versions
u2022http://www.cisco.com/c/dam/en/us/td/i/templates/blank.gifTelnet
u2022http://www.cisc:.com-/c/dom/en/us/td/i/templates/blank.gifTFTP http://www.cisco.com/c/en/us/td/docs/ios/12_4t/12_4t11/htsecmpp.html
New Questions 10
When unicast reverse path forwarding is configured on an interface, which action does the interface take first when it receives a packet?
A. it verifies that the source has a valid VEF adjacency.
B. It checks the egress access lists.
C. it verifies a reverse path via the FIB to the source.
D. It checks the ingress access lists.
Answer: A
New Questions 11
Which type of information is displayed when a network engineer executes the show track 1 command on the router?
A. information about the IP route track table.
B. time to next poll for track object 1
C. information about tracking list 1
D. tracking information statistics.
Answer: C
100% Update Cisco 300-101 Questions & Answers shared by 2passeasy, Get HERE: https://www.2passeasy.com/dumps/300-101/ (New 436 Q&As)