Master the ccna 200 125 pdf CCNA Cisco Certified Network Associate CCNA (v3.0) content and be ready for exam day success quickly with this Exambible 200 125 ccna pdf latest exam. We guarantee it!We make it a reality and give you real ccna 200 125 dumps questions in our Cisco ccna 200 125 pdf braindumps.Latest 100% VALID Cisco ccna 200 125 torrent Exam Questions Dumps at below page. You can use our Cisco 200 125 ccna braindumps and pass your exam.


♥♥ 2018 NEW RECOMMEND ♥♥

Free VCE & PDF File for Cisco 200-125 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 200-125 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/200-125-exam-dumps.html

P.S. 100% Correct 200-125 guidance are available on Google Drive, GET MORE: https://drive.google.com/open?id=1G0OQvn58oVaFHU8QUjdLariF4zPSu0BB


New Cisco 200-125 Exam Dumps Collection (Question 12 - Question 21)

Question No: 12

Which two options are primary responsibilities of the APIC-EM controller? (Choose two.)

A. It automates network actions between different device types.

B. It provides robust asset management.

C. It tracks license usage and Cisco IOS versions.

D. It automates network actions between legacy equipment.

E. It makes network functions programmable.

Answer: A,E

Explanation: http://www.cisco.com/c/en/us/products/cloud-systems-management/application-policy-infrastructure-controllerenterprise- module/index.html

Automate network configuration and setup Deploy network devices faster

Automate device deployment and provisioning across the enterprise. Provide a programmable network

Enable developers to create new applications that use the network to fuel business growth.


Question No: 13

Which command do you enter to view EIGRPv6 adjacencies?

A. show ipv6 eigrp 1 interface

B. show ipv6 route eigrp

C. showipv6 eigrp neighbors

D. show running-configuration eigrp

Answer: C


Question No: 14

Which DTP switch port mode allows the port to create a trunk link if the neighboring port is in trunk mode, dynamic desirable mode, or desirable auto mode?

A. trunk

B. access

C. dynamic desirable

D. dynamic auto

Answer: C


Question No: 15

Which keyword enables an HSRP router to take the active role immediately when it comes online?

A. IP address

B. Priority

C. Preempt

D. Version

Answer: C


Question No: 16

which port security mode can assist with troubleshooting by keeping count of violations?

A. access.

B. protect.

C. restrict.

D. shutdown.

Answer: C


Question No: 17

CORRECT TEXTScenario:

You work as Junior Network Engineer for RADO Network Ltd company. Your colleague has set up a Layer 2 network for testing purpose in one of your client locations. You must verify the configuration and fix if any issues identified as per customer requirements.

Topology Details

- Three switches (SVV1. SW2, and SW3) are connected using Ethernet link as shown in the topology diagram.

- Server1 and PC1 are connected to SW1 and are assigned to VLAN 500 and VLAN 600 respectively.

- Server2 and PC2 are connected to SW2 and are assigned to VLAN 500 and VLAN 600 respectively.

- PC3 is connected to SW3 and assigned to VLAN 600.

Customer requirements

- Verify if switch ports are assigned in correct VLANs as per topology diagram Identify and fix any misconfigurations found in three switches.

- Verify if trunk links are operational between switches and the IEEE 802.1 q trunk encapsulation method is used Identrfy and fix if any misconfigurations are found in the trunk configuration

- You must make sure the ports connected between switches are set as trunk ports.

Special Note: To gain the maximum number you must make sure that VLANs are assigned to switch ports as per customer requirements and make sure the trunk links are operational between switches Do not change VLAN names and VLAN number that are already configured in the switches

Answer:

See the explanation below:

Explanation:

Switch 1 port E0/1 WAS CONNECTED TO A COMPUTER WITH A STRAIGHT THROUGH CABLE AND AS WELL AS ROLLOVER CABLE (FOR CONFIGURATION OF SWITCH PORTS ON THIS SWITCH) WHICH WAS SHOWN IN VLAN 600 IN THE DIAGRAM BUT ACTUALLY THAT PC WAS NOT IN VLAN 600 AFTER CHECKING THE VLAN CONFIGURATION USING SHOW VLAN COMMAND. INSTEAD THIS PORT WAS CONFIGURED IN VLAN 1. SO WE NEEDED TO PUT THAT PC IN VAN 600 USING FOLLOWING COMMANDS-SW1(CONFIG)# INTERFACE E0/0SW1(CONFIG- IF)#SWITCHPORT MODE ACCESSSW1(CONFIG-IF)#SWITCHPORT ACCESS VLAN 600

NOW THE E0/0-PORT OF THIS SWITCH-SW1 WAS RECEIVING NATIVE VLAN MISMATCH FROM SW3 SWITCH-PORT E0/1. ALSO E0/0 OF SW1 AND E0/1 OF SW3 WERE NOT IN TRUNKING MODE. AND THE QUESTION WAS ASKED TO MAKE SURE THAT CONNECTION BETWEEN BOTH SWITCHES SHOULD BE IN TRUNKING MODE WITH 802.1Q ENCAPSULATION ENABLEDSO USED THE BELOW COMMANDS- SW1(CONFIG)#INT E0/0SW1(CONFIG-IF)#SWITCHPORT TRUNK ENCAPSULATION DOT1QSW1(CONFIG-IF)# SWITCHPORT MODE TRUNK.

ON OTHER SWITCH WHICH IS SWITCH3

SW3(CONFIG)#INT E0/0SW3(CONFIG-IF)#SWITCHPORT TRUNK ENCAPSULATION DOT1QSW3(CONFIG-IF)# SWITCHPORT MODE TRUNK.SW3(CONFIG-IF)# SWITCHPORT TRUNK NATIVE VLAN 1

ALSO PORT E0/2 OF SW3 WAS CONNECTED TO SERVER AND IN VLAN 600 AND PORT E0/3 WAS ASSIGNED TO VLAN 500 AND TO A COMPUTER AGAIN IN VLAN 500 ITSELF. SO THAT COMPUTER HAD A CONSOLE CABLE CONNECTED TO SW3 AS WELL IN ORDER TO CONFIGURE SW3 PORTS AS TRUNK PORTS AND SWITCHPORTS USING THE ABOVE STEPS FOR SW1 WHICH WAS MENTIONED ABOVE.

SIMILARLY SW2 PORT E0/1 PORT WAS CONNECTED TO E0/4 PORT OF SW3 SO AGAIN TRUNK LINK CONFIGURATIONS BETWEEN E0/1 AND E0/4 PORTS BETWEEN TWO SWITCHES NEED TO EB DONE HERE. BUT YOU NEDD NOT TO AGAIN RUN THAT NATIVE VLAN COMMAND CHANGE ON SW3 OR SW2 SINCE ON SW3 WE AKREADY CHANGED IN ABOVE STEP AND IN SW2 ITS FINE IN VLAN 1 ONLY.

A COMPUTER WAS CONNECTED TO PORT E0/2 OF SW2 AND WAS IN VLAN 600 AND E0/3 WAS CONNECTED TIO SERVER WHCH WAS IN VLAN 600 AGAIN. ALSO AGAIN THIS TIME THE COMPUTER WAS CONNECTED TO THE SWITCH USING A CONSOLE CABLE ASWELL TO GIVE YOU CONSOLE ACCESS TO CONFIGURE AND VERIFY THE CONFIGURATIONS ON SW2. SO JUST VERIFY THE ACCESS PORTS ARE CORRECTLY ASSIGNED AND TRUNK PORTS AS WELL USING BELOW

COMMANDS.


Question No: 18

While troubleshooting a connection problem on a computer, you determined that the computer can ping a specific web server but it cannot connect to TCP port 80 on that server. Which reason for the problem is most likely true?

A. A VLAN number is incorrect.

B. A Route is missing

C. An ARP table entry is missing.

D. An ACL is blocking the TCP port.

Answer: D


Question No: 19

which layer of the osi model does PPP perform ?

A. Layer 2

B. Layer 3

C. Layer 5

D. Layer 1

Answer: A


Question No: 20

Refer to Exhibit.

If Computer A is sending traffic to computer B, which option is the source ip address when a packet leaves R1 on interface F0/1?

A. IP address of the R2 interface F0/1

B. Ip address of computer B

C. Ip address of R1 interface F0/1

D. Ip address of Computer A

Answer: D


Question No: 21

If you configure syslog messages without specifying the logging trap level, which log messages will the router send?

A. error conditions only

B. warning and error conditions only

C. normal but significant conditions only

D. all levels except debugging

E. informational messages only

Answer: E


P.S. Easily pass 200-125 Exam with Examcollectionplus 100% Correct Dumps & pdf vce, Try Free: https://www.examcollectionplus.net/vce-200-125/ (889 New Questions)