By using Pass4sure 1Z0-820 puts, you can obtain a excellent end result merely that will make you complete Oracle examination. Furthermore, in the event you been unsuccessful in the 1Z0-820 exam the very first time of employing our own products, all cash you have to pay will be return. You simply need to send your 1Z0-820 report transcript since the pdf to us. Following verifying your information, we are going to return the cash and send it back for your account as quickly as possible.
2016 Jul 1Z0-820 actual test
Q41. You need to migrate a UFS file system named /production_ufs to a ZFS file system named /production_ufs. The /production_ufs file system cannot be taken down or be out of production during the migration, and the current /production_ufs file system must remain active until the /ptoduction_zfs file system is copied and ready.
Which method allows you to meet both requirements?
1. Copy live data from /production_ufs to /production_zfs while /production_ufs is in use.
2. When the copy is complete, /production_zfs will contain an up-to date copy of /production_ufs
A. Create a snapshot of the UFS file system.
Create the new ZFS file system.
Use cpio to copy data from the snapshot to the new ZFS file system.
B. Create a new Boot Environment.
Create the ZFS file system.
Use lucreate -m to copy data from the Current UFS file system to the new ZFS file system.
C. Mirror the existing UFS file system by using SVM.
After both submissions are in sync, migrate one of the submissions to a ZFS file System by using
D. Create the new ZFS file system by using zfs create import to import data from the existing UFS file system into the new ZFS file system
E. Create the new zfs file system by using the zfs create -oshadow.
Q42. Which five statements describe options available for installing the Oracle Solaris 11operating system using the installation media?
A. You can perform a text or LiveCD installation locally or over the network.
B. The text Installer does not install the GNOME desktop. The GNOME desktop package must he added after you have installed the operating system.
C. The LiveCD Installation cannot be used to install multiple instances of Oracle Solaris.
D. The LiveCD installer cannot be used if you need to preserve a specific Solaris Volume Table of Contents (VTOC) slice in your current operating system.
E. The LiveCD Installer is for x86 platforms only.
F. The GUI installer cannot be used to upgrade your operating system from Solaris 10.
G. If you are installing Oracle Solaris 11 on an x86-based system that will have more than one operating system installed in it, you cannot partition your disk during the installation process.
H. The LiveCD installer can be used for SPARC or x86 platforms.
Q43. You are setting up a local IPS package repository on your Oracle Solaris11 server:
You want to point the existing local IPS publisher to the new local IPS repository located in /repo.
These are the stops that you have followed:
1. Download and rsync the contents of the Oracle Solaris11 repository ISO image to the /repo directory.
2. Configure the repository server service properties. The svcprop command display, the IPS related properties:
pkg/readonly Boolean true
The 1s command displays the contents of the /repo directory:
The svcs publisher command shows the svc: /application/pkg/server: default service is online.
The pkg publisher command shows the svc: /application/pkg/server: default service is online.
The pkg publisher command still displays:
Which steps needs to be performed to set the local IPS publisher to the local IPS repository/repo?
A. Issue the pkgrepo refresh-s command to refresh the repository.
B. Restart thesvc:/application/pkg/server:default service.
C. pkg set-publisher command to set the new repository location.
D. Issue the pkgrepo rebuild command to rebuild the repository.
E. Issue the pkgrepo set command to set the new repository location.
Q44. Identify the two security features incorporated in the Oracle Solaris 11 Cryptographic Framework.
A. Layer 5 IP address encryptions
B. Internet protocol security
C. Diffie-Kerberos coaxial key encryption
D. Signed cryptographic plugins (providers)
E. Kernel support for signed antivirus plugins
Q45. You are going to create live zones on you server. Disk space is critical on this server so you need to reduce the amount of disk space required for these zones. Much of the data required for each of these zones is identical, so you want to eliminate the duplicate copies of data and store only data that is unique to each zone.
Which two options provide a solution for eliminating the duplicate copies of data that is common between all of these zones?
A. Create the zones by using sparse root zones.
B. Set the dedup property to on and the dedupratio to at least 1.5 for thezpool.
Create a separate ZFS file system for each zone in the zpool.
C. Put all of the zones in the same ZFS file system and set the dedupratio property for the ZFS file system to at least 1.5.
D. Put all of the zones in the same ZFS file system and set the dedup property for the file system to on.
E. Put each zone in a separate ZFS file system within the same zpool.
Set thededupproperty to on for each ZFS file system.
Up to date 1Z0-820 free download:
Q46. You are troubleshooting the Oracle Solaris11 Automated Installer (AI), which is not connecting with the IPS software repository.
Which three steps will help determine the cause of DNS name resolution failure?
A. Verify the contents of /etc/resolve.conf.
B. Run netstat-nr to verify the routing to the DNS server.
C. Ping the IP address of the IPS server to verify connectivity.
D. On the installation server, verify that the menu.1st file for the client points to a valid boot arc hive.
E. Run df-k to verify that the boot directory containing the boot archive is loopback mounted under /etc/netboot.
F. Run the command /sbin/dhcpinfo DNSserv to ensure that the DHCP server providing the DNS server information.
Q47. You are asked to troubleshoot networking issues on an unfamiliar system.
Select the correct command to display what network devices are installed.
A. ifconfig -a
B. dladm show-dev
C. dladm show-phys
D. dladm show-ether
E. netadm show-dev
F. netadm show-ether
Q48. You need to set up a local package repository to serve 75 client systems. Multiple clients will being the package repository concurrently and you need to ensure that the local repository performs very well under this heavy load, especially during package intensive operations.
Which option would ensure the best performance of the repository during package-intensive rations by multiple clients?
A. Set up multipathing on the package repository server to distribute the network load multiple network interfaces.
B. Deploy a second instance of the package repository server to run as a read writable mirror.
C. Deploy a second instance of the package repository server to run asa read-only mirror.
D. Deploy a second instance of the package repository server to run as a clone of the primary repository server.
E. Deploy a package repository locally on each client.
Q49. The core dump configuration in your non global zone is
A user is running a process in a non-global zone (testzone) and the process crashes. The process information is:
When the user's process crashes in testzone, a non-global zone, where will the core dump be saved?
A. The file will be stored in the non-global zone's directory: /var/core/pprocess/core.hash.2663.
B. The file will be saved in the global zone's directory: /var/core/core.bash.2663.
C. A core file cannot be generated in a non-global zone because it shares the kernel with the global zone.
D. The file will be stored in the global zone's directory: /var/core/pprocess/core.bash.2663.
E. The file will be saved in non-global zone’s directory: /var/core/core.bash.2663
Q50. You have been asked to troubleshoot the initial configuration of a virtual network connecting two local zones with the outside world.
View the exhibit.
dladm create-vnic -1 vswitch192.168.1 vnic1
fails with the error
dladm: invalid link name ‘vswitch192.168.1’
What is the reason for this error?
A. The name vswitch192.168.1 is not legal.
B. The zone must be specified with
dladm create-vnic -z zone3 vnic1.
C. The virtual interface must be specified with
dladm create-vnic -z zone3 vnic1.
D. The virtual interface must be created with
ipadm create-vnic-1 switch192.168.1.
E. The virtual switch must be created first with
dladm create-etherstub vswitch192.168.1.