We provide which are the best for clearing 1Z0-404 test, and to get certified by Oracle Oracle Communications Session Border Controller 7 Basic Implementation Essentials. The covers all the knowledge points of the real 1Z0-404 exam. Crack your Oracle 1Z0-404 Exam with latest dumps, guaranteed!

Online 1Z0-404 free questions and answers of New Version:

NEW QUESTION 1
You are configuring access rules in a Session Border Controller Peering architecture.
Which two configuration steps are required to allow access only from User Agents (UAs) in a specific IP subnet? (Choose two.)

  • A. Navigate to the sip-port configuration element and set the allow-anonymous parameter to realm-prefix.
  • B. Navigate to the session-agent configuration element and set the ip-address parameter to the IP address of your trusted User Agent (UA).
  • C. Navigate to the sip-port configuration element and set the allow-anonymous parameter to agents-only.
  • D. Navigate to the sip-port configuration element and set the allow-anonymous parameter to all.
  • E. Navigate to therealm-config configuration element and set the addr-prefix parameter to the IP subnet of your trusted User Agents (UAs).

Answer: BC

NEW QUESTION 2
In which two ways can you remove support for telnet from a media interface? (Choose two.)

  • A. Navigate to the network-interface configuration element and run the delete-hip-ip <IP address> command.
  • B. Navigate to the phy-interface configuration element and run the remove-hip-ip <IP address> command.
  • C. Navigate to the network-interface configuration element and run the remove-telnet-ip <IP address> command.
  • D. Navigate to the network-interface configuration element and run the remove-hip-ip <IP address> command.
  • E. Navigate to the phy-interface configurationelement and run the remove-telnet-ip <IP address> command.

Answer: AC

NEW QUESTION 3
Your customer would like to allow call attempts only from User Agents(UAs) who have previously registered through the Session Border Controller or who are configured as session agents.
How would you accomplish this?

  • A. Navigate to the sip-port configuration element and set the allow-anonymous parameter to agents-only.
  • B. Navigate to the session-agent configuration element and set the allow-anonymous parameter to prev-registered.
  • C. Navigate to the sip-port configuration element and set the allow-anonymous parameter to realm-prefix.
  • D. Navigate to the sip-port configurationelement and set the allow-anonymous parameter to registered.
  • E. Navigate to the session-agent configuration element and set the allow-anonymous parameter to 403-forbidden.

Answer: D

NEW QUESTION 4
Whichtwo statements are true about SIP response code handling on the Session Border
Controller? (Choose two.)

  • A. The Session Border Controller will originate a 503 when there are no steering pool ports available.
  • B. The Session Border Controller will originate a 403 response when bandwidth allocated to a realm has been exhausted.
  • C. The Session Border Controller cannot originate 3xx class redirect responses.
  • D. By default, the Session Border Controller will recurse on the 6xx messages.
  • E. The Session Border Controller can transmit a different SIP response code than it received.

Answer: AC

NEW QUESTION 5
When setting up the registration-caching parameter to enabled in the sip-interface configuration element, _______.

  • A. the Session Border Controller will never use the SIP-NAT mechanism for routing
  • B. the Session Border Controller will not use the registration cache for routing
  • C. all endpoints in the realm will be cached when registered
  • D. only endpoints behind NAT in the realm will be cached when registered
  • E. the Session Border Controller will never use the local-policy mechanism for routing

Answer: A

NEW QUESTION 6
Which three statements are true about the bootloader? (Choose three.)

  • A. It decompresses the image file and loads it into the main RAM
  • B. It reads the imagefile
  • C. It is based on Linux
  • D. It looks at the boot parameters
  • E. It is a Windriver’s VxWork product

Answer: ABD

NEW QUESTION 7
The Session Border Controller ACLI is structured in a way that separates configuration of layers 3,4, and 5. This allows the system administrator to link each configuration together as needed for signaling and media routing purposes.
Which two options are valid to link signaling and media interfaces to a realm? (Choose two.)

  • A. Navigate to the iwf-config configuration element and set the media-interface-id parameter to the realm name.
  • B. Navigate to the account-config configuration element and set the realm-id parameter to the realm name.
  • C. Navigate to the network-interface configuration element and set the sip-interface-id parameter to the realm name.
  • D. Navigate to the steering-pool configuration element and set the realm-id parameter to the realm name.
  • E. Navigate to the sip-interface configuration element and set the realm-id parameter to the realm name.

Answer: AB

NEW QUESTION 8
What is the first thing you must do when setting up the boot parameters of the Session Border Controller?

  • A. reset thesystem clock
  • B. know the superuser mode password and access the configuration mode
  • C. disable FTP access to the wancom0 management interface
  • D. obtain the bootparam license
  • E. verify the configuration by executing the verify-config command

Answer: D

NEW QUESTION 9
What configuration step is required for booting the SessionBorder Controller from an external FTP server?

  • A. Navigate to the bootparams configuration branch and set the host inet field to the IP address of the external BOOTP Server from which the Session Border Controller can boot.
  • B. Navigate to the system configuration branch and set the ip address field of the wancom1 management interface.
  • C. Navigate to the bootparams configuration branch and set the ip address field of the destination SIP device with which the Session Border Controller needs to interact.
  • D. Navigate to the system configuration branch and set the ip address field of the wancom0 management interface.
  • E. Navigate to the bootparams configuration branch, set the host inet or Host IP, FTP username, and FTP password for the external FTP Server in which the image file resides.

Answer: C

NEW QUESTION 10
You used the no command to delete a configuration element. Whichstatement is true?

  • A. The deletion is lost on immediate reboot.
  • B. The deletion is reflected when viewing the running configuration.
  • C. The deletion takes effect immediately in the saved configuration.
  • D. The deletion always requires a reboot to take effect.
  • E. The deletion requires auto-save enabled.

Answer: A

NEW QUESTION 11
To ensure proper operation of a Session Border Controller HighAvailability (HA) pair, it is critical that both of the devices can originate legitimate traffic on media interfaces independent of the network interface IP address.
How is this type of traffic accommodated?

  • A. by setting the pri-utility-addr, sec-utility-addr, and sec-gateway values to addresses in the same subnet as the IP address configured on the management interfaces
  • B. by setting the pri-utility-addr, sec-utility-addr, and sec-gateway values to addresses inthe same subnet as the IP address configured on the media interfaces
  • C. by setting the utility address and sec-gateway values to addresses in different subnets as the IP address configured on the wancom interfaces
  • D. by setting a unique address on the wancoml and wancom2 interfaces via the utilityaddress command
  • E. via the utility address parameters on the wancoml and wancom2 interfaces

Answer: A

NEW QUESTION 12
You are configuring the boot parameters in the Session Border Controller. Which three statements are true about the boot parameters? (Choose three.)

  • A. A reboot is always required to apply any change to the boot parameters.
  • B. The target name is usedfor domain name resolution.
  • C. The system clock is a boot parameter.
  • D. The boot parameters are stored in Non-Volatile Random Access Memory (NVRAM).
  • E. The boot parameters are not affected by the activate-config command.

Answer: ACD

NEW QUESTION 13
What two problems do Network Address Translations (NATs)introduce into VoIP networks? (Choose two.)

  • A. There are no major concerns with NATs.
  • B. NATs block unsolicited incoming signaling and media.
  • C. NATs block unsolicited incoming signaling but allow incoming media.
  • D. NATs pinholes expire after aconfigurable time.
  • E. NATs devices can be overloaded by incoming registrations.

Answer: DE

NEW QUESTION 14
You finished configuring a not Real Time Change (not RTC)-supported configuration element and you want to apply the change in your service.
Which two options are valid in order toaccomplish this? (Choose two.)

  • A. From user mode, execute the save-config and activate-config commands.
  • B. From configuration mode, execute the save-config, activate-config, and reboot commands.
  • C. From superuser mode, execute the save-config and activate-config and reboot commands.
  • D. From superuser mode, execute the save-config and activate-config commands.
  • E. From superuser mode, execute the save-config, activate-config, and reboot force commands.

Answer: AD

NEW QUESTION 15
A steering pool defines _____.

  • A. a range of ports used to route media flows as they egress the Session Border Controller
  • B. an IP address and port the Session Border Controller uses for steering media to the external media server
  • C. an IP address and range of ports the Session Border Controller will use to declare itself as the destination for media flows in a session
  • D. a range of IP addresses and a pool of ports the Session Border Controller will use to declare itself as the destination for all subsequent media flows in a dialog
  • E. arange of IP addresses used to route media flows as they egress the Session Border Controller

Answer: C

NEW QUESTION 16
You are logged in to the Session Border Controller a superuser. You want to remove other user from the system.
How do you accomplish this?

  • A. from the superuser mode, by executing the remove user <index number> command
  • B. from the user mode, by executing the kill <index number> command
  • C. from the superuser mode, by executing the remove user <username> command
  • D. from the superuser mode, by executing the kill <index number> command
  • E. from the user mode, by executing the remove user <index number> command

Answer: C

NEW QUESTION 17
When provisioning the redundancy-configuration, the peer name for each of the peers in a High Availability configuration must also be defined in each system’s ______.

  • A. hostname parameter under the sip-configconfiguration element
  • B. hostname parameter under the account-config configuration element
  • C. hostname parameter under the bootparam configuration branch
  • D. target name parameter under the bootparam configuration branch
  • E. hostname parameter under the system-config configuration element

Answer: E

Thanks for reading the newest 1Z0-404 exam dumps! We recommend you to try the PREMIUM Certstest 1Z0-404 dumps in VCE and PDF here: https://www.certstest.com/dumps/1Z0-404/ (70 Q&As Dumps)