Want to know comptia server+ sk0 004 features? Want to lear more about comptia server+ sk0 004 experience? Study comptia server+ study guide exam sk0 004. Gat a success with an absolute guarantee to pass CompTIA SK0-004 (CompTIA Server+) test on your first attempt.

Check SK0-004 free dumps before getting the full version:

NEW QUESTION 1
A new server was installed for the purpose of monitoring network traffic. The network has been configured in such a way that all traffic will be mirrored out the port this server is connected to. When reviewing the network traffic logs on the server only traffic destined to the server is listed in the logs.
Which of the following is preventing the server from seeing all network traffic?

  • A. NIC filtering is enabled.
  • B. Port security is configured.
  • C. NIC is not in promiscuous mode.
  • D. NIC is in promiscuous mod

Answer: C

NEW QUESTION 2
An administrator is backing up a database server. The administrator must select a backup method that does not change the archive bit. Which of the following backup techniques should be used to
meet these requirements?

  • A. Full
  • B. Incremental
  • C. Differential
  • D. Selective

Answer: C

NEW QUESTION 3
Which of the following permissions would enable users to modify files or directories on a server?

  • A. Access
  • B. Execute
  • C. Read
  • D. Write

Answer: D

NEW QUESTION 4
Which of the following BEST describes RAID 1?

  • A. Mirroring
  • B. Striping
  • C. Striping with parity
  • D. Striping with mirroring

Answer: A

NEW QUESTION 5
A technician is troubleshooting a hardware issue with a blade. When the technician inserts the blade into a slot, the blade will not power up. The blade will power up, however, in another chassis that has the same configuration. The blade management software reports no issue with the chassis or
with any other blades. Which of the following is the MOST likely cause of the blade not powering up?

  • A. Chassis firmware
  • B. Chassis power supply
  • C. Slot in backplane
  • D. Blade management module

Answer: C

NEW QUESTION 6
Server A hosts a mission-critical business application. The server has one disk and one NIC. The administrator has been asked to implement a solution to meet the business requirement that the application must maintain high availability, even in case of a hardware failure. Which of the following BEST meets this requirement?

  • A. Configure failover clustering using Server A and a new server.
  • B. Add multiple disks on the server and configure RAID 5.
  • C. Add an additional NIC and configure the NIC as standby.
  • D. Move the application to another server that has more resource

Answer: A

NEW QUESTION 7
In a workgroup, all of the following steps are required for a DHCP server EXCEPT:

  • A. activate the scopes.
  • B. authorize the server.
  • C. configure the scopes.
  • D. install DHCP servic

Answer: B

NEW QUESTION 8
Which of the following plans describes the process by which an organization manages a major outage?

  • A. Contingency
  • B. Site-to-site backup
  • C. Disaster recovery
  • D. Business continuity

Answer: D

NEW QUESTION 9
Which of the following commands displays the network path between two devices?

  • A. ping
  • B. tracert
  • C. netstat
  • D. route

Answer: B

NEW QUESTION 10
Two servers are to be configured for high availability in a cluster. Both servers will be running applications at the same time. This feature is known as:

  • A. round robin.
  • B. heartbeat.
  • C. active/active.
  • D. active/passiv

Answer: C

NEW QUESTION 11
An administrator is configuring a server for remote access. The administrator wants to be able to power on a server from a remote location. Which of the following needs to be configured on the server to accomplish this task?

  • A. Configure ILO/iDRAC on the server.
  • B. Configure VPN access on the server.
  • C. Configure the serial connection.
  • D. Configure the boot sequenc

Answer: A

NEW QUESTION 12
A hardware compatibility list recommends striping with double parity as storage for an application. In a test environment, a technician realizes that a different RAID level can be used to compensate for a limited number of available disks. Which of the following is the closest RAID level the technician should deploy while minimizing the number of disks and maintaining fault tolerance?

  • A. 1
  • B. 5
  • C. 10

Answer: C

NEW QUESTION 13
When running a Windows server, which option is used with the ping command to define the number of packets transmitted?

  • A. -n
  • B. -a
  • C. -r
  • D. -v

Answer: A

NEW QUESTION 14
A technician has finished installing the operating system on a new server and needs to provide IP addressing information. The server will be connected to the DMZ network. Devices on the network use a default gateway address of 192.168.55.1. Which of the following is a valid IP address for a server in the DMZ network?

  • A. IP: 192.168.55.1, NETMASK 255.255.255.0
  • B. IP: 192.168.55.5, NETMASK 255.255.255.128
  • C. IP: 192.168.55.155, NETMASK 255.255.255.128
  • D. IP: 192.168.55.255, NETMASK 255.255.255.0

Answer: B

NEW QUESTION 15
A systems administrator is inspecting a file server setup with a RAID 10 configuration among four 160GB SAS drives. The administrator has replaced all of the drives with 500GB SAS drives. Which of the following storage tools should the administrator use NEXT to effectively administer the change?

  • A. Disk management tool
  • B. Disk monitoring tool
  • C. Disk cloning tool
  • D. Disk partitioning tool

Answer: A

NEW QUESTION 16
A server that can store extensible schema and communicate using SQL for describing transactions to be performed is commonly called a:

  • A. database server
  • B. directory server
  • C. web server
  • D. messaging server

Answer: A

NEW QUESTION 17
A technician wants to copy files from one server to another by connecting the servers directly. Which of the following cables should the technician install to achieve this?

  • A. Cat 5e crossover
  • B. Cat 6 straight through
  • C. Single-mode fiber
  • D. Multimode fiber

Answer: A

NEW QUESTION 18
Which of the following expansion cards should be installed into a server to provide fiber channel SAN connectivity?

  • A. HBA
  • B. USB
  • C. UAC
  • D. NIC

Answer: A

NEW QUESTION 19
Which of the following is the MOST energy efficient way of powering equipment within a datacenter with a large UPS battery bank?

  • A. 48V DC
  • B. 120V single-phase
  • C. 240VAC 3-phase
  • D. 480V 3-phase

Answer: A

Recommend!! Get the Full SK0-004 dumps in VCE and PDF From Certstest, Welcome to Download: https://www.certstest.com/dumps/SK0-004/ (New 558 Q&As Version)