Exact H12-211 Exam Questions and Answers 2021

NEW QUESTION 1
A DHCP server has been established in the enterprise network. After the client has obtained an IP addressfrom the DHCP server, the user decided to modify the IP address manually. In what way may this affect theenterprise network?(Choose two).

• A. The client may experience an IP address conflict.
• B. The client may access the network normally.
• C. The client’s interface connection will shutdown.
• D. The client will associate with another DHCP server.

Answer: AB

NEW QUESTION 2
Refer to the graphic. Two peering routers are running RIP. RTA is using RIPv1 to advertise its routes, whileRTB is using RIPv2. What effect will this have on learned routes?

• A. RTA and RTB will both learn the routes advertised by RIP.
• B. RTA will learn the RIP route advertised by RTB, however RTB is unable to learn the route advertised byRTA.
• C. RTB will learn the RIP route advertised by RTA, however RTA is unable to learn the route advertised byRTB.
• D. Neither RTA nor RTB are able to learn the RIP routes advertised by the peer.

Answer: B

NEW QUESTION 3
Which of the following descriptions regarding eSight is not correct?

• A. eSight is used to monitor and manage enterprise networks.
• B. eSight supports only Huawei devices
• C. eSight supports WLAN management and monitoring of hotspot coverage.
• D. eSight supports the backup of configuration files and network traffic analysis.

Answer: B

NEW QUESTION 4
Refer to the graphic. Packet encapsulation in the IPsec architecture is performed as shown. Which IPsecmode is being used to encapsulate the packet?

• A. normal mode
• B. transport mode
• C. tunnel mode
• D. this encapsulation is wrong

Answer: C

NEW QUESTION 5
Which of the following commands is used to display the OSPF neighbor relationship establishment?

• A. display ospf neighbor
• B. display ospf brief
• C. display ospf peer
• D. display ospf interface

Answer: C

NEW QUESTION 6
Which of the following statements regarding layer-2 switch is incorrect?

• A. The switch learns MAC addresses automatically
• B. The layer-3 header is modified before the received packet is transmitted
• C. The layer-2 header is modified before the received packet is transmitted.
• D. The layer-2 LAN switch operates at data link layer

Answer: B

NEW QUESTION 7
Which of the following statements describes the network shown?(Choose two)

• A. There are 6 collision domains in the network.
• B. There are 2 broadcast domains in the network.
• C. There are 4 collision domains in the network.
• D. There are 6 broadcast domains in the network.

Answer: BC

NEW QUESTION 8
Which of the following commands is used to enter the system-view from the user view on a Huawei router?

• A. system-view
• B. enable
• C. configure terminal
• D. interface system

Answer: A

NEW QUESTION 9
In port aggregation, “multiple” ports are aggregated to form a port aggregation group so that all the memberports in the group share the outgoing/incoming load. At which layer is port aggregation implemented?

• A. Physical Layer
• B. Data Link Layer
• C. Network Layer
• D. Transport Layer

Answer: B

NEW QUESTION 10
What is the default authentication mode for the default_admin domain?

• A. None
• B. Local
• C. Radius
• D. 802.1X

Answer: B

NEW QUESTION 11
Refer to the grapic. An administrator has configured RIPv2 on the two routers, following which he implementsthe command silent-interface s0/0/1 on RTA. What effect will this command have on the network? (TwoAnswers)

• A. RTA will continue to learn routes from RTB
• B. RTB will continue to learn routes from RTA
• C. RTA will have no neighbor relationship with RTB
• D. RTB will have no adjacency relationship with RTA

Answer: AD

NEW QUESTION 12
<Huawei> system-view
[Huawei]command-privilege level 3 view user save
Refer to the command output. What is the result of the shown command?

• A. The command adjusts the save command of a user to privilege level 3.
• B. The command adjusts the save command in the user view to privilege level 3.
• C. The command adjusts the user view command privilege level to 3, and saves the configuration.
• D. The command adjusts the privilege level of a user to 3, and saves the configuration.

Answer: B

NEW QUESTION 13
Refer to the graphic. RTA and RTB are connected to the same Frame Relay switch and use same DLCInumber, which following is correct?(Choose two).

• A. RTA and RTB must be associated with the same PVC
• B. RTA and RTB can be associated with different PVC’s
• C. The DLCI on the different physical interfaces can be the same
• D. The DLCI on the different physical interfaces cannot be the same

Answer: BC

NEW QUESTION 14
With what kind of routers does a DRother router exchange link state information and route information?(Choose two)

• A. DR
• B. BDR
• C. DRother
• D. All OSPF neighbors

Answer: AB

NEW QUESTION 15
In Layer 2 mode, the transmission rate of an Eth-Trunk interface is determined by which of the following?

• A. Maximum number of Up member links
• B. Minimum number of Up member links
• C. Number of Up member interfaces
• D. Number of interfaces.

Answer: AC

NEW QUESTION 16
A server is linked to port interface G0/0/1 of a switch. The administrator wishes to allow only this server to belinked to this interface on the switch. Which method can be used to achieve this?

• A. Configure a static ARP entry using the server’s IP address and MAC address in the switch.
• B. Configure a static MAC address binding entry of the server’s MAC address and the interface in the switch.
• C. Configure the default gateway of the switch to be the same as the server’s IP address.
• D. It is not possible to enable a single device to be associated with an interface.

Answer: B

NEW QUESTION 17
The administrator wishes to change name of the router. Under which view should the administrator be in orderto achieve this?

• A. User-view
• B. System-view
• C. Interface-view
• D. Protocol-view

Answer: B

NEW QUESTION 18
Which of the following parameter settings for terminal emulation are correct when configuring a Huawei routerthrough the Console port?

• A. 4800bps, 8 data bits,1 stop bits, odd parity check, and no flow control
• B. 9600bps, 8 data bits, 1 stop bits, no parity check, and no flow control
• C. 9600bps, 8 data bits, 1 stop bits, even parity check, and hardware flow control
• D. 19200bps, 8 data bits, 1 stop bits, no parity check, and no flow control

Answer: B