we provide Best Quality Avaya 7003 practice exam which are the best for clearing 7003 test, and to get certified by Avaya Avaya Communication Server 1000 for Avaya Aura® Implementation Exam. The 7003 Questions & Answers covers all the knowledge points of the real 7003 exam. Crack your Avaya 7003 Exam with latest dumps, guaranteed!


♥♥ 2021 NEW RECOMMEND ♥♥

Free VCE & PDF File for Avaya 7003 Real Exam (Full Version!)

★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions

Free Instant Download NEW 7003 Exam Dumps (PDF & VCE):
Available on: http://www.surepassexam.com/7003-exam-dumps.html

New Avaya 7003 Exam Dumps Collection (Question 4 - Question 13)

New Questions 4

A customer is installing a new common processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. They are connected to the backplane serial port 0 of the MGC to access the configuration menu. No IP information exists for the MGC.

How does the customer access the configuration menu for the MGC?

A. Type u201cmgcsetupu201d on the screen.

B. No action required. The MGC will boot directly into the setup menu.

C. The prompt u201cPress any key to stop auto-boot enter mgcsetupu201d appears.

D. Enter a shell command : <CTRL>0<CTRL>M, provide OAM username and password to access OAM shell.

Answer: B


New Questions 5

You are installing a new Communication Server 1000E (CS 1000E) SA release 7x system for your customer. They have asked you to implement the corporate Directory Feature during the installation.

A. SFTP must be disabled in LD 117.

B. Valid telephony accounts must already exist in Subscriber Manager.

C. The CS 1000E Call Server must be joined to security domain.

D. Centralized authentication must be disabled.

Answer: C


New Questions 6

Click the exhibit button

During the installation the installation of a Communication Server 1000E Rls. 7x High Availability system for a customer, attempts to register an IP 1230 Desktop telephone with the system are unsuccessful. Network connectivity issues have already been ruled out, however a system configuration issue is suspected.

What is causing the problem?

A. The virtual gateway application is not enabled.

B. The proper firmware has not been uploaded for this telephone.

C. The Line Terminal Proxy Server is not enabled for the node

D. The Datagram Transport Layer Security (DTLS) Policy off.

Answer: C


New Questions 7

A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co-resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.

MG1: CPMG 128

MG2: MGC 128 DSP DB in position 2

MG3: MGC 128 DSP DB in position 2

After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified?

Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?

A. Numbering of VGW channels: 128 Trunk data block VGW

Terminal number: 004 0 02 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

B. Numbering of VGW channels: 128 Trunk data block VGW

Terminal number: 004 0 01 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

C. Numbering of VGW channels: 128 Trunk data block VGW

Terminal number: 004 0 00 0 Designator field for trunk: DSP Extended trunk DSP DB 128

Customer number: 00

D. Numbering of VGW channels: 128 Trunk data block VGW

Terminal number: 004 0 11 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

Answer: D


New Questions 8

A customer is implementing a Communication Server 1000E (CS 1000E) Rls. 7x High Availability (HA) system. The customer wants to know if there are any special package requirements beyond the HA Package needed for the system.

Which two software packages are mandatory when deploying a CS 1000E system? (Choose two)

A. IPMG u2013 Media gateway 1000E package 403

B. SOFTSWITCH-Soft Switch Package 402

C. SBO u2013 Branch Office Package 390

D. SIP u2013 SIP Gateway and Converged Desktop Package 406

Answer: A,D


New Questions 9

A customer is upgrading an existing option 11C Rls. 5.5 chassis system with an SSC card Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP media

Gateway 1000E chassis. As a part of this upgrade a CPMG Co-Resident call Server, Signaling Server Card and Gateway Controller has been included as part of the upgrade.

What happens to the Terminal Number (TN) format during this upgrade?

A. The TN format is automatically converted to the large system format of Loop-Shelf-Card- Unit for all assigned Terminal Numbers.

B. The TN format is automatically converted to the large system format of Card-Unit for all assigned Terminal Numbers

C. The TN format is automatically converted to the large system format of Loop-Shelf-Card- Unit for all new programmed Terminal Numbers

D. The format is automatically converted to the large system format of Loop-Shelf-Card- Unit for IP phones only. All other devices assigned Terminal Numbers must be manually reprogrammed.

Answer: A


New Questions 10

A customer has completed the security configuration for the security servers in the Avaya Aura integrated system. The System is using Avaya Aura System Manager as the Primary Security Server. The Customer is accessing the Base manager of each Server from the Element list to perform base configuration changes. Aaa Base Managers are accessible except the primary server; When Clicking on the Primary Server, the customer is taken to the System Manager Dashboard page.

What is the recommended course of action for the customer?

A. Log into the System Manager command to access Base Manager.

B. On the system Manager Console, access UCM Roles to change access Privileges.

C. No action is required; System Manager does not have an associated base Manager.

D. Log into Base Manager of the Primary Security server using local-login to access the Base Manager.

Answer: C


New Questions 11

Click the Exhibit button.

A technician is asked to review the existing trunk information for a customer

According to the Element manager screen capture shown in the exhibit, which type of trunk is this?

A. DID

B. VIRTUAL

C. RAN

D. H 323

Answer: B


New Questions 12

A customer has deployed a Communications Server 1000Rls. 7x system at their site. Their sales department is expanding and has asked that five new telephones be added with the same capabilities as the existing telephones in the department.

Which programming command should be used to complete this task?

A. Move to DN

B. Move from DN

C. Copy from DN

D. Copy from TN

Answer: D


New Questions 13

A customer has a several analog telephones running of a Flexible Analog Line Card (FALC) in an IPMG. Users are able to receive calls on the telephone and have a conversation, however they cannot initiate a call as there is no dial tone.

What should be checked first?

A. Tone and digital loops (TDS), extended tone detector (XTD)

B. Physical connections, dsp resource availability, and tone loops

C. All tone and digit switch loops (TDS), IPMG registration status

D. All XTD and conference loops

Answer: C


P.S. Easily pass 7003 Exam with Certleader Best Quality Dumps & pdf vce, Try Free: https://www.certleader.com/7003-dumps.html ( New Questions)