Tested 70-740 Exam Dumps 2021

NEW QUESTION 1
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 have the Hyper-V server role installed.
An iSCSI SAN connects to the network.
You create a LUN on the SAN and configure both servers to connect to the iSCSI target.
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage.
You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management snap-in
• D. the configurehyperv.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manager app

Answer: F

Explanation: References:
https://technet.microsoft.com/en-us/library/jj612868(v=ws.11).aspx

NEW QUESTION 2
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain has two clusters named FC1 and FC2.
The domain contains servers that run Windows Server 2021. The Servers are configured as shown in the following table.

Server1 hosts a highly available virtual machine named VM1.
You need to move VM1 from Server1 to Server3 by using live migration.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation: References: http://www.checkyourlogs.net/?p=16401

NEW QUESTION 3
HOTSPOT
You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2021. The hosts are nodes in a failover cluster.
The failover cluster is configured to balance virtual machines when a node is more than 80 percent loaded.
You need to configure the failover cluster to balance the virtual machines when the load of a node is more than five percent higher than the average for the nodes.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 4
DRAG DROP
You have a network that contains several servers that run Windows Server 2021.
You need to use Desired State Configuration (DSC) to configure the servers to meet the following requirements:
- Install the Web Server server role
- Start the World Wide Web Publishing service.
How should you configure the DSC resources? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation:

NEW QUESTION 5
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1
hosts a virtual machine named VM1 that is in a Running state.
On Server1, you export VM1 and then you import VM1 on Server2. What is the current state of VM1 on Server2?

• A. Off
• B. Running
• C. Paused
• D. Saved

Answer: B

NEW QUESTION 6
Note: This question is part of a series of questions that use the same similar answer choices An
answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have three servers named Server1, Server2. Server3 that run Windows Server 2021 Server1 and Server2 have the Hyper-V server role installed Server3 has the iSCSI Target Server role service installed.

You need to create a Hyper-V cluster Which tool should you use first?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: H

NEW QUESTION 7
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 hosts a virtual machine named VM1 that runs Windows Server 2021.
On VM1, Dynamic Memory is disabled, MAC spoofing is enabled for the virtual network adapter, and checkpoints are disabled. You need to ensure that you can install the Hyper-V server role on VM1. What should you do?

• A. Shut down VM1, enable Dynamic Memory on VM1 and then start VM1.
• B. Configure VM1 to use standard checkpoints.
• C. Disable Hyper-V integration services for VM1 and then restarts VM1.
• D. Shut down VMI, run the Set-VMProcessor cmdlet and then start VM1.

Answer: D

Explanation: References:
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/user-guide/nested- virtualization

NEW QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: You open Active Directory Users and Computers, right-click contoso.com in the console tree, and then click Operations Master.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: This solution only shows the domain FSMO roles, not the forest FSMO roles.
References: https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo-roles/

NEW QUESTION 9
DRAG DROP
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server 1 hosts a virtual machine named VM1 that runs Windows Server 2021. Server1 has a USB 3.0 device attached to a PCI Express (PCIe) bus.
You need to provide VM1 with pass-through access to the USB 3.0 device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 10
You have a server named Server1 that runs Windows Server 2021. Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1,
vSwitch2 and vSwitch3.
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1.
What should you do?

• A. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
• B. From Hyper-V Manager on Server1, modify the settings on VM1.
• C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
• D. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.

Answer: D

Explanation: https://technet.microsoft.com/en-us/windows-server-docs/networking/technologies/nic-teaming/nic-teaming

NEW QUESTION 11
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From the Security setting of each zone on Server1, you modify the permissions Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 12
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
Server1 allows inbound connectivity from all computers in the contoso.com domain. Server1 has an IP address of 192.168.0.10.
Server1 hosts a Windows container named Container1. Container1 hosts a website that is accessible on port 80.
You need to ensure that you can use the Docker(?) client to manage Container1 from any computer in the domain.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 13
HOTSPOT
You deploy a new Hyper-V host named Server1 that runs Windows Server 2021. You implement receive side scaling (RSS) on Server1.
The chipset on Server1 does not support NetDMA.
All of the equipment on your network supports 10-Gbps connectivity. On Server1, you deploy a virtual machine named VM1.
You configure VM1 to aggregate all of the Windows and non-Windows log files for all of the servers on the network.
VM1 has four virtual processors.
You discover that VM1 drops packets.
Which two options should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 14
You have a server named Server1 that runs Windows Server 2021.
Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks. You create a virtual disk named Disk 1 that uses a mirrored layout.
You create a partition named Partition1 that uses all of the available space on Disk 1. You need to extend Partition1.
What should you do first?

• A. From Windows PowerShell, run the Resize-Partition cmdlet.
• B. From Disk Management, modify the properties of Partition1.
• C. From the Storage Pools page in Server Manager, extend a virtual disk.
• D. From Disk Management, extend a volume.

Answer: C

Explanation: References: https://charbelnemnom.com/2015/03/step-by-step-how-to-extend-and-resize-a-two- way-mirrored-storage-tiered-space-storagespaces-ws2012r2/

NEW QUESTION 15
DRAG DROP
On a new server, you install Windows Server 2021, and then you install the Hyper-V server role.
You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server.
Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.

Answer:

Explanation:
References: https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/deploy-containers-on-server

NEW QUESTION 16
Your network contains an Active Directory domain. The domain contains a new file server named
Server1 that runs a Server Core installation of Windows Server 2021.
Server1 has an ReFS-formatted volume D: and NTFS-formatted volume E: The volumes do not contain any data.
You install the Data Deduplication role service on Server1.
You need to implement Data Deduplication for volumes on D: and E:.
Solution: From Windows PowerShell, you run Format-Volume E: -FileSystem ReFS and Enable- DeDupVolume -Volume D:,E:.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
References: https://docs.microsoft.com/en-us/windows-server/storage/data- deduplication/understand