Your success in Microsoft 70 680 practice test is our sole target and we develop all our 70 680 practice test braindumps in a way that facilitates the attainment of this target. Not only is our mcts 70 680 study material the best you can find, it is also the most detailed and the most updated. 70 680 exam Practice Exams for Microsoft Windows 70 680 exam are written to the highest standards of technical accuracy.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-680 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-680 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-680-exam-dumps.html
Q281. - (Topic 1)
Your network consists of a single IPv4 subnet. The subnet contains 20 computers that run Windows 7.
You add a new computer named Computer1 to the subnet.
You discover that Computer1 has an IP address of 169.254.34.12.
You cannot connect to other computers on the network. Other computers on the network can connect to each other.
You need to ensure that you can connect to all computers on the network. What should you do?
A. Turn off Windows Firewall.
B. Run Ipconfig.exe /renew.
C. Configure a static TCP/IP address.
D. Run Netsh.exe interface ipv4 install.
Answer: C
Explanation:
[Need better justification] Configuring static IP addresses When you assign a static IP address, you need to tell the computer the IP address you want to use, the subnet mask for this IP address, and, if necessary, the default gateway to use for internetwork communications. An IP address is a numeric identifier for a computer. Ip addressing schemes vary according to how your network is configured, but they're normally assigned based on a particular network segment.
Q282. - (Topic 1)
Which of the following best describes how the user is alerted with information system and configuration alerts?
A. A popup occurs and the Windows 7 desktop contrast is dimmed. Until you acknowledge the alert the screen will not move.
B. If Aero is installed the shaking alert flag appears in the index bar of every open window.
C. A flag in the taskbar with a red "x" indicates there is a problem needing attention.
D. All of the above
Answer: C
Q283. - (Topic 1)
You have a computer that runs Windows 7. The computer connects to the corporate network by using a VPN connection.
You need to ensure that you can access the Internet when the VPN connection is active. The solution must prevent Internet traffic from being routed through the VPN connection.
What should you do?
A. Configure a static DNS server address.
B. Configure a static IP address and default gateway.
C. Configure the security settings of the VPN connection.
D. Configure the advanced TCP/IP settings of the VPN connection.
Answer: D
Explanation:
To prevent the default route from being created In the properties of the TCP/IP protocol of the dial-up connection object, in the Advanced TCP/IP Settings dialog box, click the General tab, and then clear the Use default gateway on remote network check box.
Q284. - (Topic 3)
You have a computer that runs Windows 7. The computer has a single volume. You install 15 applications and customize the environment.
You complete the following actions:
Create an export by using Windows Easy Transfer
Create a system image by using Backup and Restore
Install the User State Migration Tool (USMT) and run Scanstate
The disk on the computer fails. You replace the disk.
You need to restore the environment to the previous state.
What should you do?
A. Install Windows 7, install USMT, and then run Loadstate.
B. Install Windows 7 and then import the Windows Easy Transfer package.
C. Start the computer from a Windows Recovery Environment (Windows RE) disk and then run Bcdboot.exe.
D. Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the system image.
Answer: D
Explanation:
Restoring from a System Image Backup
A System Image restore rewrites the entire contents of a system volume. Therefore, you restore from a System Image backup by booting from the Windows 7 Installation DVD-ROM and loading System Recovery tools or by pressing F8 during the boot process. Restoring from a System Image backup enables you to quickly get a computer running after you replace a failed hard disk, or if the operating system installation has been corrupted (for example, by malware that cannot be removed except 0 by wiping the disk). It is sometimes known as complete recovery or complete PC Restore. This procedure assumes that the System Recovery Options (otherwise known as the Windows Recovery Environment, or Windows RE) files are present on the DVD-ROM. If not, you can boot from the installation DVD-ROM and press F8 during the boot to access the Advanced Boot Options, as described in the next section of this lesson. To restore a System Image backup, perform the following steps:
1. Ensure the backup medium is connected to your computer.2. Insert the Windows 7 DVD-ROM. Ensure that the computer BIOS is configured to boot from the DVD-ROM.3. Restart your computer. When prompted to boot from DVD-ROM, press any key.4. Windows 7 Setup loads. When prompted, select your regional preferences and then click Next.5. Click Repair Your Computer.6. In the System Recovery Options dialog box, click Restore Your Computer Using System Image. If thebackup was saved to a DVD-ROM, insert the DVD-ROM now. Click Next. The Windows System Image Restore Wizard starts.7. On the Select A System Image Backup page, the most recent backup is automatically selected. If this is the backup you want to restore, click Next. Otherwise, click Select A System Image, click Next, and then select the desired backup.8. On the Choose Additional Restore Options page, select the Format And Repartition Disks check box if you want to reformat the disk and overwrite all data, or if the disk is not formatted. If you do not want to overwrite all the data on your current disk, do not select this check box. Click Next.9. Click Finish. When prompted, click Yes to confirm. Windows System Image Restore reads the data from the backup and overwrites existing files. You can restore to a different-sized hard disk, provided that the hard disk is large enough to store the backup. After the restore is complete, the computer restarts using the restored system volume.
Q285. - (Topic 5)
You use a portable computer that has Windows 7 installed. The computer has a single hard disk drive and a dual-core CPU.
You need to analyze the performance of the computer to meet the following requirements:
. Include the CPU, Memory, and Disk subsystems.
. Collect information in a report.
What should you do?
A. Run powercfg.exe.
B. Run the Windows Experience Index.
C. Configure Event Viewer subscriptions.
D. Open Task Manager.
E. Open System Properties, and configure performance settings.
F. Open System Properties, and configure environment variables.
G. Open System Properties, and configure user profiles settings.
H. Open System Properties, and configure the page file settings.
I. Open Performance Monitor, and configure a Data Collector Set.
J. Open Performance Monitor, and customize the System Monitor view.
Answer: I
Q286. HOTSPOT - (Topic 4)
You are running windows 7 on a portable computer. A custom power plan named "On The Move" is optimized for battery life.
The computer enters sleep mode when the portable computer is closed.
You need to change a setting so that when you close the portable computer, nothing happens.
Which setting should you change? (To answer, select the appropriate setting in the work area.)
Answer:
Q287. - (Topic 1)
You have a reference computer that runs Windows 7.
You plan to deploy an image of the computer.
You create an answer file named answer.xml.
You need to ensure that the installation applies the answer file after you deploy the image.
Which command should you run before you capture the image?
A. Imagex.exe /append answer.xml /check
B. Imagex.exe /mount answer.xml /verify
C. Sysprep.exe /reboot /audit /unattend:answer.xml
D. Sysprep.exe /generalize /oobe /unattend:answer.xml
Answer: D
Explanation:
To prepare the reference computer for the user, you use the Sysprep utility with the /generalize option to remove hardware-specific information from the Windows installation and the /oobe option to configure the computer to boot to Windows Welcome upon the next restart. Open an elevated command prompt on the reference computer and run the following command: c:windowssystem32sysprepsysprep.exe /oobe /generalize /shutdown Sysprep prepares the image for capture by cleaning up various user-specific and computer-specific settings, as well as log files. The reference installation now is complete and ready to be imaged.
Q288. - (Topic 3)
Your network has a main office and a branch office.
The branch office has five client computers that run Windows 7 and a server that runs Windows Server 2008 R2. The branch office server is enabled for BranchCache.
You need to configure Windows Firewall on each client computer so that cached content can be retrieved from the branch office server.
Which firewall rule should you enable on the client computers?
A. BranchCache - Content Retrieval (Uses HTTP)
B. BranchCache - Hosted Cache Server (Uses HTTPS)
C. BranchCache - Peer Discovery (Uses WSD)
D. File and Printer Sharing
Answer: A
Explanation:
Configure domain member client distributed cache mode firewall rules When you configure BranchCache in distributed cache mode, BranchCache client computers use the Hypertext Transfer Protocol (HTTP) for data transfer with other client computers. BranchCache client computers also use the Web Services Dynamic Discovery (WS-Discovery) protocol when they attempt to discover content on client cache servers. You can use this procedure to configure client firewall exceptions to allow incoming HTTP and WS-Discovery traffic on client computers that are configured for distributed cache mode. The BranchCache – Content Retrieval (Uses HTTP) predefined rule. If this rule is not available, create rules that allow inbound and outbound traffic on TCP port 80. This rule is required for both Hosted Cache and Distributed Cache mode. The BranchCache – Peer-Discovery (Uses WSD) predefined rule. If this rule is not available, create rules that allow inbound and outbound traffic on UDP port 3702. This rule is only required when using Distributed Cache mode. The BranchCache – Hosted Cache Client (HTTPS-Out) predefined rule. It this rule is not available, configure a rule that allows outbound traffic on TCP port 443. This rule is required only when using Hosted Cache mode.
Q289. - (Topic 2)
A user telephones your help desk. Her Favorites list is corrupt and she is having problems accessing the Web sites she visits regularly. All the computers in your organization are backed up every night with a file and folder backup that uses default settings. A restore point was created on all the company's client computers 24 hours ago because a new device driver was installed. You performed a System Image backup on all the computers in your organization three weeks ago. The user is not computer-literate and you need to fix the problem for her.
What is the most efficient way to do so?
A. Perform a system restore.
B. Perform a System Image restore.
C. Use the Restore Files Wizard to restore the Favorites folder in the user's backed-up profile.
D. Access the History tab under Favorites on the user's browser. Browse to recently visited sites and add them to Favorites.
Answer: C
Q290. - (Topic 2)
Kim Akers has an administrator account on a computer running Windows 7 Enterprise.
Don Hall has a standard account on the same computer. Both users have Microsoft Office Word and Microsoft Office Excel files saved in their Documents library. Don stores Microsoft Office PowerPoint presentations in a subfolder of his Documents library named Presentations. He also stores digital photographs in his Pictures library.
Don has created a folder called Secret in his Documents library and has encrypted the folder and its contents. He stores confidential files in that folder.
When Don last logged on, he deleted some personal files but did not empty his Recycle Bin.
Kim is logged on to the computer. She has plugged in a USB flash memory device that holds personal files but has not yet copied any of these files to the computer. She has never formatted the flash memory device.
The computer is configured to let Windows decide what files and folders to back up.
Kim opens the Backup And Restore console but does not change any settings. She clicks Backup Now.
Which files are backed up? (Choose all that apply.)
A. The Word and Excel files in Don's Documents library
B. The Word and Excel files in Kim's Documents library
C. The PowerPoint files in Don's Presentation folder
D. The digital photographs in Don's Pictures library
E. The files in Don's Secret folder
F. The files in Don's Recycle Bin
G. The files on Kim's USB flash memory device
Answer: A,B,C,D