Exam Code: 70-680 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: TS:Windows 7,Configuring
Certification Provider: Microsoft
Free Today! Guaranteed Training- Pass 70-680 Exam.
2021 Mar 70-680 practice exam
Q321. - (Topic 1)
You have a computer named Computer1 that runs Windows 7.
You need to ensure that Computer1 can connect to File Transfer Protocol (FTP) servers only while it is connected to a private network.
What should you do?
A. From Windows Firewall with Advanced Security, create a new rule.
B. From the local Group Policy, modify the application control policies.
C. From Windows Firewall, modify the Allowed Programs and Features list.
D. From Network and Sharing Center, modify the Advanced Sharing settings.
Answer: A
Explanation:
Creating WFAS Rules The process for configuring inbound rules and outbound rules is essentially the same: In the WFAS console, select the node that represents the type of rule that you want to create and then click New Rule. This opens the New Inbound (or Outbound) Rule Wizard. The first page, shown in Figure 7-7, allows you to specify the type of rule that you are going to create. You can select between a program, port, predefined, or custom rule. The program and predefined rules are similar to what you can create using Windows Firewall. A custom rule allows you to configure a rule based on criteria not covered by any of the other options. You would create a custom rule if you wanted a rule that applied to a particular service rather than a program or port. You can also use a custom rule if you want to create a rule that involves both a specific program and a set of ports. For example, if you wanted to allow communication to a specific program on a certain port but not other ports, you would create a custom rule.
Q322. - (Topic 5)
You use a desktop computer that has Windows 7 Ultimate SP1. The relevant portions of the computer configuration are shown in the following exhibits:
The Disk Management console (Click the Exhibit button.)
The System Properties window (Click the Exhibit button.)
The System protection for Local Disk C window (Click the Exhibit button.)
You need to create a backup copy of a 40-GB Virtual Hard Disk (VHD) file in a local folder on drive C.
What should you do?
A. Delete restore points.
B. Create a restore point.
C. Perform a system restore.
D. Search for the file in the Recycle Bin.
E. Increase disk space used for system protection.
F. Copy the file from a previous version of a folder.
G. Set restore settings to Only restore previous versions of files.
H. Run the cipher /x command from the elevated command prompt.
I. Run the vssadmin list volumes command from the elevated command prompt.
J. Run the vssadmin list shadows command from the elevated command prompt.
K. Run the compact /U <file_name> command from the elevated command prompt.
Answer: A
Q323. - (Topic 3)
You have a computer that runs Windows 7.
You add a new hard disk drive to the computer and create a new NTFS partition.
You need to ensure that you can use the Previous Versions feature on the new drive.
What should you do?
A. From Disk Management, convert the new disk to a dynamic disk.
B. From System Properties, configure the System Protection settings.
C. From System and Security, enable BitLocker Drive Encryption (BitLocker).
D. From the properties of the new drive, create a share and modify the caching settings.
Answer: B
Explanation:
System protection might not be turned on for the drive. If system protection is not turned on, Windows can't create previous versions.To turn on system protection:
1. Click to open System.2. In the left pane, click System protection. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.3. Click the drive, and then click Configure.4. Click Restore system settings and previous versions of files, and then click OK.
Q324. - (Topic 3)
You have a computer that runs Windows 7. The computer contains a folder named C:data.
You use Advanced Sharing to share C:data by using the default share permissions.
When a user tries to access the share over the network, he gets an "Access is Denied" error message.
You need to ensure that the user can access the share.
What should you do?
A. Allow file and printer sharing through Windows Firewall.
B. Change the network location from a Public network to a Home or Work network.
C. From the Security settings of the folder, assign the user the Read NTFS permission.
D. From the Advanced Sharing settings of the folder, assign the user the Read share permission.
Answer: C
Explanation:
Advanced Security Settings Properties Page - Permissions Tab You can add additional resources, groups or users to have explicit NTFS permissions to access this object, or you can edit or remove the NTFS permissions granted to a resource, group, or user on the object. Inherited permissions are those that are propagated to an object from a parent object. Inherited permissions ease the task of managing permissions and ensure consistency of permissions among all objects within a given container.
Q325. - (Topic 5)
You use a computer that has Windows 7 SP1 installed to access your company's internal website. The website requires a secure connection. The certificate is a self-signed Secure Socket Layer (SSL).
You attempt to connect to the internal website. You receive the following error message:
"There is a problem with this website's security certificate."
You need to be able to connect to the internal website successfully.
What should you do?
A. From Internet Explorer, add the website to the Local Intranet zone.
B. From Certificate Manager, import the website's certificate into the computer's Trusted Publishers store.
C. From Certificate Manager, import the website's certificate into your Trusted Root Certification Authorities store.
D. From Certificate Manager, import the website's certificate into your Personal store.
Answer: D
Improved 70-680 book:
Q326. - (Topic 3)
You have a computer that runs Windows 7 and Windows Internet Explorer 8.
You open Internet Explorer and access a Web site. The Web site displays a page that has misaligned text and graphic image. You verify that the Web page displays correctly in previous versions of Internet Explorer. You need to view the Web page correctly.
What should you do?
A. Modify the text size.
B. Enable Caret Browsing.
C. Enable Compatibility View.
D. Disable the SmartScreen Filter.
Answer: C
Explanation:
Internet Explorer Compatibility View Internet Explorer Compatibility View allows sites designed for previous versions of Internet Explorer to display correctly for users of Internet Explorer 8. You can enable Compatibility View for a page by clicking the broken page icon at the end of the address bar. You can configure Compatibility View settings through the Compatibility View Settings dialog box. You can access this dialog box by clicking Compatibility View Settings on the Tools menu of Internet Explorer.
Q327. DRAG DROP - (Topic 6)
A company has client computers that run Windows Vista.
You need to install Windows 7 on a client computer in a dual-boot configuration with the existing Windows Vista installation, without reducing the size of the partition that contains Windows Vista.
Which actions should you perform in sequence?
(To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
Answer:
Q328. - (Topic 5)
You have a computer that runs a 32-bit version of Windows 7 Home Premium. The computer has a single partition on a single hard disk drive.
You want to test a 64-bit version of Windows 7 Ultimate. You configure the computer for a dual boot with previously installed Windows 7 Home Premium.
You need to configure the computer to support the dual boot.
What should you do?
A. Start Windows 7 Home Premium. Create a Virtual Hard Disk (VHD) file to start Windows 7 Ultimate.
B. Start Windows 7 Home Premium. Add a new entry to the boot menu.
C. Attach Windows 7 Ultimate media as an ISO image into Windows 7 Home Premium.
D. Install Virtual PC into Windows 7 Home Premium.
Answer: A
Q329. - (Topic 3)
You download a Windows PowerShell snap-in.
You need to ensure that the snap-in is automatically imported when you open a new PowerShell session.
What should you do?
A. Modify the PowerShell execution policy.
B. Create a new PowerShell manifest file. Update the PowerShell shortcut and specify the file option.
C. Create a new PowerShell console file. Update the PowerShell shortcut and specify the psconsolefile option.
D. Create a new PowerShell formatting and type file. Copy the file to the %SystemRoot%system32 WindowsPowerShellv1.0 folder.
Answer: C
Explanation:
PSConsoleFile Loads the specified Windows PowerShell console file. To create a console file, use the Export-Console cmdlet in Windows PowerShell.
Export-Console The Export-Console cmdlet exports the names of the Windows PowerShell snap-ins in the current session to a Windows PowerShell console file (.psc1). You can use this cmdlet to save the snap-ins for use in future sessions. To add the snap-ins in the .psc1 console file to a session, start Windows PowerShell (Powershell.exe) at the command line by using Cmd.exe or another Windows PowerShell session, and then use the PSConsoleFile parameter of Powershell.exe to specify the console file.
Q330. - (Topic 4)
You need to identify the hardware failures have occurred on your computer in the past six months.
What should you do?
A. Open Device Manager.
B. Open Reliability Monitor.
C. Create a User Defined Data Collector Set.
D. Create a new Event Trace Sessions Data Collector Set.
Answer: B
Explanation:
Reliability Monitor is an advanced tool that measures hardware and software problems and other changes to your computer. It provides a stability index that ranges from 1 (the least stable) to 10 (the most stable). You can use the index to help evaluate the reliability of your computer. Any change you make to your computer or problem that occurs on your computer affects the stability index.
The Reliability Monitor is intended for advanced computer users, such as software developers and network administrators.
Click to open Action Center.
Click Maintenance. Then, under Check for solutions to problem reports, click View reliability history.
In Reliability Monitor, you can:
Click any event on the graph to view its details.
Click Days or Weeks to view the stability index over a specific period of time.
Click items in the Action column to view more information about each event.
Click View all problem reports to view only the problems that have occurred on your
computer. This view doesn't include the other computer events that show up in Reliability
Monitor, such as events about software installation.