Act now and download your Microsoft 70 533 study guide pdf test today! Do not waste time for the worthless Microsoft 70 533 exam dumps tutorials. Download Most up-to-date Microsoft Implementing Microsoft Azure Infrastructure Solutions exam with real questions and answers and begin to learn Microsoft 70 533 exam dumps pdf with a classic professional.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Microsoft 70-533 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 70-533 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/70-533-exam-dumps.html
Q11. You manage a cloud service that has a web application named WebRole1. WebRole1 writes error messages to the Windows Event Log.
Users report receiving an error page with the following message: "Event 26 has occurred. Contact your system administrator."
You need to access the WebRole1 event log.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Enable verbose monitoring.
B. Update the WebRole1 web.config file.
C. Update the cloud service definition file and the service configuration file.
D. Run the Set-AzureVMDiagnosticsExtension PowerShell cmdlet.
E. Run the Enable-AzureWebsiteApplicationDiagnostic PowerShell cmdlet.
F. Create a storage account.
Answer: A,C,F
Explanation: AF: You can monitor key performance metrics for your cloud services in the Azure Management Portal. You can set the level of monitoring to minimal and verbose for each service role, and can customize the monitoring displays. Verbose monitoring data is stored in a storage account, which you can access outside the portal.
* The service configuration file specifies the number of role instances to deploy for each role in the service, the values of any configuration settings, and the thumbprints for any certificates associated with a role. If the service is part of a Virtual Network, configuration information for the network must be provided in the service configuration file, as well as in the virtual networking configuration file. The default extension for the service configuration file is .cscfg.
* The service definition file defines the service model for an application. The file contains the definitions for the roles that are available to a cloud service, specifies the service endpoints, and establishes configuration settings for the service.
URLs:
http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-monitor/ http://msdn.microsoft.com/en-us/library/azure/ee758710.aspx http://msdn.microsoft.com/en-us/library/azure/ee758711.aspx
Q12. HOTSPOT
You manage two cloud services named Service1 and Service2. The development team updates the code for each application and notifies you that the services are packaged and ready for deployment.
Each cloud service has specific requirements for deployment according to the following table.
In the table below, identify the deployment method for each service. Make only one selection in each column.
Answer:
Q13. DRAG DROP
Your company network includes a single forest with multiple domains. You plan to migrate from On-Premises Exchange to Exchange Online.
You want to provision the On-Premises Windows Active Directory (AD) and Azure Active Directory (Azure AD) service accounts.
You need to set the required permissions for the Azure AD service account.
Which settings should you use? To answer, drag the appropriate permission to the service account. Each permission may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q14. You administer an Azure Web Site named contoso. The development team has implemented changes to the website that need to be validated.
You need to validate and deploy the changes with minimum downtime to users.
What should you do first?
A. Create a new Linked Resource.
B. Configure Remote Debugging on contoso.
C. Create a new website named contosoStaging.
D. Create a deployment slot named contosoStaging.
E. Back up the contoso website to a deployment slot.
Answer: D
Explanation: When you deploy your application to Azure Websites, you can deploy to a separate deployment slot instead of the default production slot, which are actually live sites with their own hostnames.
Furthermore, you can swap the sites and site configurations between two deployment slots, including the production slot. Deploying your application to a deployment slot has the following benefits:
* You can validate website changes in a staging deployment slot before swapping it with the production slot.
* After a swap, the slot with previously staged site now has the previous production site. If the changes swapped into the production slot are not as you expected, you can perform the same swap immediately to get your "last known good site" back.
* Deploying a site to a slot first and swapping it into production ensures that all instances of the slot are warmed up before being swapped into production. This eliminates downtime when you deploy your site. The traffic redirection is seamless, and no requests are dropped as a result of swap operations.
Reference: Staged Deployment on Microsoft Azure Websites
Q15. Your company network includes an On-Premises Windows Active Directory (AD) that has a DNS domain named contoso.local and an email domain named contoso.com. You plan to migrate from On-Premises Exchange to Office 365.
You configure DirSync and set all Azure Active Directory {Azure AD)
usernames as %username%@contoso.com
You need to ensure that each user is able to log on by using the email domain as the username.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Verify the email domain in Azure AD domains.
B. Run the Set-MsolUserPnncipalName -UserPnncipalName %username%@co ntoso.onmicrosoft.com -NewUserPrincipalName %usemame %@contoso.com Power Shell cmdlet.
C. Edit the ProxyAddress attribute on the On-Premises Windows AD user account.
D. Verify the Windows AD DNS domain in Azure AD domains.
E. Update the On-Premises Windows AD user account UPN to match the email address.
Answer: C,D
Explanation: * There are two main traffic flows originating from the server hosting the Azure Active Directory Sync tool: The Azure Active Directory Sync tool queries a domain controller on the on-premises network for changes to accounts and passwords. The Azure Active Directory Sync tool sends the changes to accounts and passwords to the Azure AD instance of your Office 365 subscription. These changes are sent through the on-premises network’s proxy server.
* Verify that your virtual machine is joined to the domain by checking your internal DNS to make sure that an Address (A) record was added for the virtual machine with the correct IP address from Azure. For the Azure Active Directory Sync tool to gain access to Internet resources, you must configure the server that runs the Azure Active Directory Sync tool to use the on-premises network's proxy server.
Reference: Deploy Office 365 Directory Synchronization in Microsoft Azure
Q16. DRAG DROP
You plan to deploy a cloud service named contosoapp. The service includes a web role named contosowebrole. The web role has an endpoint named restrictedEndpoint.
You need to allow access to restricted Endpoint only from your office machine using the IP address 145.34.67.82.
Which values should you use within the service configuration file? To answer, drag the appropriate value to the correct location in the service configuration file. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Q17. Your network includes a legacy application named LegacyApp1. The application only runs in the Microsoft .NET 3.5 Framework on Windows Server 2008.
You plan to deploy to Azure Cloud Services.
You need to ensure that LegacyApp1 will run correctly in the new environment.
What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
A. Upload a VHD with Windows Server 2008 installed.
B. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 2.
C. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 1.
D. Deploy LegacyApp1 to a cloud service instance configured with Guest OS Family 3.
Answer: B,C
Explanation: Guest OS Family 1 and Guest OS Family 2 supports .NET 3.5 and .Net 4.0. Guest OS Family 3 and Guest OS Family 4 supports .NET 4.0 and .Net 4.5.
Reference: Azure Guest OS Releases and SDK Compatibility Matrix
URL: http://msdn.microsoft.com/en-us/library/azure/ee924680.aspx
Q18. You administer an Azure solution that uses a virtual network named fabVNet. FabVNet has a single subnet named Subnet-1.
You discover a high volume of network traffic among four virtual machines (VMs) that are part of Subnet-1.
You need to isolate the network traffic among the four VMs. You want to achieve this goal with the least amount of downtime and impact on users.
What should you do?
A. Create a new subnet in the existing virtual network and move the four VMs to the new subnet.
B. Create a site-to-site virtual network and move the four VMs to your datacenter.
C. Create a new virtual network and move the VMs to the new network.
D. Create an availability set and associate the four VMs with that availability set.
Answer: A
Explanation: Machine Isolation Options
There are three basic options where machine isolation may be implemented on the Windows Azure platform:
* Between machines deployed to a single virtual network Subnets within a Single Virtual Network
* Between machines deployed to distinct virtual networks
* Between machines deployed to distinct virtual networks where a VPN connection has been established from on-premises with both virtual networks
Windows Azure provides routing across subnets within a single virtual network.
Reference: Network Isolation Options for Machines in Windows Azure Virtual Networks
Incorrect:
not B: A site-to-site VPN allows you to create a secure connection between your on-premises site and your virtual network.
Use a site-to-site connection when:
* You want to create a branch office solution.
* You want a connection between your on-premises location and your virtual network that’s available without requiring additional client-side configurations.
Q19. You manage an Azure virtual network that hosts 15 virtual machines (VMs) on a single subnet which is used for testing a line of business (LOB) application. The application is deployed to a VM named TestWebServiceVM.
You need to ensure that TestWebServiceVM always starts by using the same IP address. You need to achieve this goal by using the least amount of administrative effort.
What should you do?
A. Use the Management Portal to configure TestWebServiceVM.
B. Use RDP to configure TestWebServiceVM.
C. Run the Set-AzureStaticVNetIP PowerShell cmdlet.
D. Run the Get-AzureReservedIP PowerShell cmdlet.
Answer: C
Explanation: Specify a static internal IP for a previously created VM
If you want to set a static IP address for a VM that you previously created, you can do so by using the following cmdlets. If you already set an IP address for the VM and you want to change it to a different IP address, you’ll need to remove the existing static IP address before running these cmdlets. See the instructions below to remove a static IP. For this procedure, you’ll use the Update-AzureVM cmdlet. The Update-AzureVM cmdlet restarts the VM as part of the update process. The DIP that you specify will be assigned after the VM restarts. In this example, we set the IP address for VM2, which is located in cloud service StaticDemo.
Get-AzureVM -ServiceName StaticDemo -Name VM2 | Set-AzureStaticVNetIP -IPAddress
192.168.4.7 | Update-AzureVM
Reference: Configure a Static Internal IP Address (DIP) for a VM URL: http://msdn.microsoft.com/en-us/library/azure/dn630228.aspx
Q20. You manage an Azure Web Site named contosoweb. Logging is enabled for contosoweb.
You need to view only errors from your log files in a continuous stream as they occur.
Which Windows Power Shell command should you execute?
A. Get-AzureWebSiteLog -Name contosoweb -OutBuffer Error
B. Save-AzureWebSiteLog -Name contosoweb -Output Errors
C. Get-AzureWebSiteLog -Name contosoweb -Tail –Message Error
D. Get-Azure WebSiteLog -Name contosoweb -Message Error
Answer: C
Explanation: Example
This example starts log streaming and show error logs only.
Windows PowerShell
C:PS>Get-AzureWebsiteLog -Tail -Message Error
Reference: Get-AzureWebsiteLog
URL: http://msdn.microsoft.com/en-us/library/dn495187.aspx