Our pass rate is high to 98.9% and the similarity percentage between our 400-051 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 400-051 exam in just one try? I am currently studying for the Cisco 400-051 exam. Latest Cisco 400-051 Test exam practice questions and answers, Try Cisco 400-051 Brain Dumps First.
♥♥ 2021 NEW RECOMMEND ♥♥
Free VCE & PDF File for Cisco 400-051 Real Exam (Full Version!)
★ Pass on Your First TRY ★ 100% Money Back Guarantee ★ Realistic Practice Exam Questions
Free Instant Download NEW 400-051 Exam Dumps (PDF & VCE):
Available on:
http://www.surepassexam.com/400-051-exam-dumps.html
P.S. Approved 400-051 torrent are available on Google Drive, GET MORE: https://drive.google.com/open?id=1tn-ZlG_58QD3zLbIMS1Dg74MvSHEMS_Q
New Cisco 400-051 Exam Dumps Collection (Question 10 - Question 19)
New Questions 10
Refer to the exhibit.
A VolP engineer must configure QoS for the switch ports. Which two set of commands configure switch port to remap every incoming packet aside from the default QoS? (Choose two).
A. FastEthernet 0/20
No mls qos trust device cisco-phone
B. FastEthernet 0/20 No mls qos trust cos
C. FastEthernet 0/20 mls qos cos3
D. FastEthernet 0/20 Mls qos cos override
E. FastEthernet 0/20
No switchport priority extend trust
F. FastEthernet 0/20
Switchport priority extend cos
Answer: CD
New Questions 11
Exhibit:
Assume that the serial interface link bandwidth is full T1. What is the maximum amount of bandwidth allowed for priority queuing of RTP packets with a DSCP value of EF?
A. 33% of 1.544 Mb/s
B. 5% of 1.544 Mb/s
C. 38% of 1.544 Mb/s
D. 62% of 1.544 Mb/s
E. 0% of 1.544 Mb/s
Answer: E
New Questions 12
A Cisco collaboration engineer is troubleshooting unexpected SlP call disconnect. Which three responses corresponding to the 5xx range? (Choose Three)
A. Forbidden
B. Unauthorized
C. Request timeout
D. Service unavailable
E. Bad gateway
F. lnternal server error
Answer: DEF
New Questions 13
Which statement about what happens to a hunt member who does not answer queuing enabled hunt list call in Cisco Unified Communications Manger 9.1 is true?
A. The hunt member remains logged in if Automatically Logout Hunt Member on No Answer is not selected in the Hunt Pilot configuration page.
B. The hunt member is logged off if Automatically Logout Hunt Member on No Answer is selected on the Line Group Configuration page.
C. The hunt member is logged off automatically and must manually reset the phone to log back in.
D. The hunt member remains logged in if Automatically Logout Hunt Member on No Answer is not selected in Cisco Unified Communications Manger Service Parameters.
E. The hunt member is logged off automatically and guest press HLOG to log back in.
Answer: B
New Questions 14
Refer to the exhibit.
A cisco collaboration engineer discovers that an instance of lOS media termination point (MTP) could not maintain stable registration with CUCM. Call manager traces is showing in the exhibit. What is the reason for the flapping registration?
A. The CCM version on lOS configuration does not match the CUCM version.
B. The lOS MTP is experiencing high CPU and is missing its keep-alive.
C. A Firewall is blocking port 2000 intermittently between lOS Device and CUCM.
D. Another lOS Media device is attempting to register with the same name.
Answer: D
New Questions 15
Refer to the exhibit.
A collaboration engineer configured MVA for a company using an existing Cisco lOS voice gateway. When testing inbound calls it is found that they are all failing.
Which two sets of configuration changes fix this problem? (Choose two)
A. Dial-peer voice 4100 pots Services ccm
Destination-pattern 4100$
B. Dial-peer voice 4101 voip
Dtmf-relay h245-alphanumeric
Session target ipv4:172.16.100.50
C. Dial-peer voice 4101 voip
Dtmf-relay h245-alphanumeric
Session target ipv4:172.16.100.50
Codec g711ulaw
D. Dial-peer voice 4100 pots
service CCM
E. Dial-peer voice 4100 pots
service CCM
lncoming called-number .T
F. Dial-peer voice 4101 VOlP
Dtmf-relay h245-signal
Session target ipv4:172.16.100.50 Codec g711alaw
Answer: CE
Explanation:
Please note that, current scenario we are talking only inbound calls.Tricky question
http://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-
callmanager/200457-Configure-the-Mobile-Voice-Access-Featur.html#anc6
Configuration Example
application
service mva http://10.106.103.149:8080/ccmivr/pages/lVRMainpage.vxml
dial-peer voice 5050 pots
service mva
incoming called-number 5050
no digit-strip
direct-inward-dial
dial-peer voice 3001 voip
destination-pattern 5050
session target ipv4:10.106.103.149
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
New Questions 16
A Cisco collaboration engineer is troubleshooting unexpected SlP call disconnects. Which three responses correspond to the 5xx range? (Choose three.)
A. Temporarily Unavailable
B. Version not supported
C. Bad request
D. Forbidden
E. Server Timeout
F. Service Unavailable
Answer: BEF
New Questions 17
Refer to the exhibit.
Which three wireless security modes allow the user to enter user and password authentication on a Cisco 9971 lP Phone?
A. Shared Key
B. EAP-FAST
C. Open with WEP
D. Open
E. LEAP
F. AKM
Answer: BEF
New Questions 18
What does a period accomplish when it is used in a SlP Dial Rule pattern that is associated with a Cisco 9971 lP Phone that is registered to Cisco Unified Communications Manager?
A. lt manages any single digit from 0 to 9.
B. lt manages any single digit from 0 to 9 or the asterisk (*) or pound (#) symbols.
C. lt is a delimiter and has no significant dialling impact
D. lt manages one or more digits from 0 to 9 or the asterisk (*) or pound (#) symbols.
E. lt manages one or more digits from 0 to 9.
Answer: B
New Questions 19
A cisco Unified CM user is set up with one remote destination profile that has two remote destination numbers.
First destination number is the user's mobile phone in country A and the Second is a mobile phone located in country B. All outbound calls are centralized from the gateway at country A. The user reports that inbound calls are properly routed to the mobile phone as long as the user is in country A. But inbound calls are not successfully routed to country B?
What could resolve this issue?
(Choose two)
A. The enable mobile connect option must be selected under the user's second remote destination number
B. The value of remote destination limits should be change to 2 instead of the default value of 4 under the end user page
C. The enable mobile voice access option must be selected under the end user page
D. The value of maximum wait time for desk pickup should be change 20000 instead of the default of 10000, under the end user page
E. The rerouting calling search space assigned to the user's remote destination profile must have access to international calls
Answer: AE
Recommend!! Get the Approved 400-051 dumps in VCE and PDF From Surepassexam, Welcome to download: https://www.surepassexam.com/400-051-exam-dumps.html (New 615 Q&As Version)