Actual Cisco 350-501 Exam Question Online

NEW QUESTION 1
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?

• A.
• B.
• C.
• D.

Answer: B

NEW QUESTION 2

Refer to the exhibit. Which configuration prevents the OSPF neighbor from establishing?

• A. default-metric
• B. duplex
• C. network statement
• D. mtu

Answer: D

NEW QUESTION 3

Refer to the exhibit. Which statement describes the effect of this configuration?

• A. It matches HTTP traffic for use in a policy map.
• B. It applies a service policy to all interfaces remarking HTTP traffic.
• C. It creates an ACL named WEB that filters HTTP traffic.
• D. It modifies the default policy map to allow all HTTP traffic through the router.

Answer: A

NEW QUESTION 4

Refer to the exhibit. In which way does router R1 operate differently than router R2?

• A. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs.
• B. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs.
• C. R1 sends LSA type 2 only and R2 sends LSA type 1 only.
• D. R1 sends LSA types 1 and 2, while R2 sends type 1,2, and 7 LSAs.

Answer: D

NEW QUESTION 5
Which task must be performed first to implement BFD in an IS-IS environment?

• A. Configure BFD in an interface configuration mode.
• B. Disable Cisco Express Forwarding on all interfaces running routing protocols other than IS-IS.
• C. Configure all IS-IS routers as Level 2 devices.
• D. Configure BFD under the IS-IS process.

Answer: D

NEW QUESTION 6

Refer to the exhibit. Export statistics received do not include the BGP next hop. Which statement about the NetFlow export statistics is true?

• A. Loopback 0 must be participating in BGP for it to be included in the export statistics.
• B. To include the BGP next hop in the export statistics, those keywords must be included with the version 9 entry.
• C. The origin AS and the peer-as will be included in the export statistics.
• D. Only the origin AS of the source router will be included in the export statistics.

Answer: B

NEW QUESTION 7
How much must the MTU be increased when configuring the 802.1q VLAN tag?

• A. 2 bytes
• B. 4 bytes
• C. 8 bytes
• D. 12 bytes

Answer: B

NEW QUESTION 8
Which statement about segment routing prefix segments is true?

• A. It is the longest path to a node.
• B. It is linked to an adjacency SID that is globally unique within the router.
• C. It is linked to a prefix SID that is globally unique within segment routing domain.
• D. It requires using EIGRP to operate.

Answer: C

NEW QUESTION 9
Which regular expression query modifier function indicates the start of a string?

• A. +
• B. ^
• C. $
• D. [^]

Answer: B

NEW QUESTION 10
Refer to the exhibit. Which statement about the neighbor statements for 192.168.1.1 is true?

• A. The router sends BGP labels for its prefixes to this peer.
• B. The router must have TDP configured for the send-label command to operate.
• C. The neighbor router receives at least four labels from this router.
• D. The router sends only a label for the prefix for Loopback0.

Answer: A

NEW QUESTION 11
Refer to the exhibit. If the NetFlow configuration is updated to version 9, which additional piece of information can be reported?

• A. IPv4 flow information
• B. BGP AS information
• C. IPv6 flow information
• D. flow sequence numbers

Answer: C

NEW QUESTION 12
Which two IS-IS parameters must match before two Level 2 peers can form an adjacency? (Choose two.)

• A. hello timer setting
• B. authentication settings
• C. area ID
• D. system ID
• E. MTU

Answer: BE

NEW QUESTION 13
You are configuring MPLS traffic-engineering tunnels in the core. Which two ways exist for the tunnel path across the core? (Choose two.)

• A. The dynamic path option is supported only with IS-IS.
• B. Tunnels can be configured with dynamic path or explicitly defined path.
• C. A zero bandwidth tunnel is not a valid option.
• D. The bandwidth statement creates a “hard” reservation on the link.
• E. Tunnel links inherit IGP metrics by default unless overridden.

Answer: BE

NEW QUESTION 14

Refer to the exhibit Router R1 and its peer R2 reside on the same subnet in the network. If an engineer implements this configuration to R1, how does it make connections to R2?

• A. R1 establishes TCP connections that are authenticated with a clear-text password.
• B. R1 establishes UDP connections that are authenticated with an MD5 password.
• C. R1 establishes UDP connections that are authenticated with a clear-text password.
• D. R1 establishes TCP connections that are authenticated with an MD5 password.

Answer: D

NEW QUESTION 15

Refer to the exhibit. After implementing a new design for the network, a technician reviews the pictures CLI output as part of the MOP. Which two elements describe what the technician can ascertain from the ImpNull output? (Choose two.)

• A. Ultimate Hop Popping is in use for the prefix displayed.
• B. Penultimate Hop Popping is in use for the prefix displayed.
• C. Label 0 is used for the prefix displayed, but will not be part of the MPLS label stack for packets destined for 192.168.10.10.
• D. Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10.
• E. Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10.

Answer: BE

NEW QUESTION 16

Refer to the exhibit. R1 and R2 are directly connected with Fast Ethernet interfaces and have the above configuration applied OSPF adjacency is not formed. When the debug ip ospf hello command is issued on R1, these log messages are seen:

Which command can be configured on routers R1 and R2 on f0/0 interfaces to form OSPF adjacency?

• A. ip ospf network point-to-multipoint non-broadcast
• B. ip ospf network non-broadcast
• C. ip ospf network broadcast
• D. ip ospf network point-to-point

Answer: D

NEW QUESTION 17

Refer to the exhibit. This configuration is being applied on an IOS XR route. Which statement about this configuration is true?

• A. It is used to create a sensor-group and has a list of YANG models for streaming.
• B. It is used to create a subscription to specify the streaming interval.
• C. It is used to identify MIB entries and has a list of YANG models.
• D. It is used to identify traps for SNMP polling.

Answer: A

NEW QUESTION 18
Which component is similar to an EVPN instance?

• A. router distinguisher
• B. MPLS label
• C. IGP router ID
• D. VRF

Answer: D

NEW QUESTION 19
What is the difference between SNMP and model- driven telemetry?

• A. SNMP uses the YANG data modeling language.
• B. Telemetry uses traps and inform messages to deliver data to a network administrator on a polling basis.
• C. Telemetry allows for modeled network data to be pushed to the network administrator on an as-needed basis.
• D. SNMP pushes network data to the network administrator whenever it is queried.

Answer: C

NEW QUESTION 20
In an MPLS network, which protocol can be used to distribute a Segment Prefix?

• A. LDP
• B. EIGRP
• C. OSPF
• D. RSVP-TE

Answer: C

NEW QUESTION 21

Refer to the exhibit Which effect of this configuration is true?

• A. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage.
• B. R1can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer.
• C. R1 can failover to any peer.
• D. R1 can failover only to a peer that is configured for LDF SSO/NSF.

Answer: A

NEW QUESTION 22
......